• Proceedings of the International Union of Geodesy And Geophysics Korea Journal of Geophysical Research Conference
• /
• 2003.05a
• /
• pp.16-16
• /
• 2003

본 연구는 ILP(International Lithosphere Project) Task Group II-4가 진행하고 있는 상부맨틀에 대한 3차원 구조도 작성 연구의 일환으로 수행되어졌으며 구조도 작성을 위한 데이터 베이스의 구조는 task group의 표준안을 따랐다. 기존 문헌과 기존의 데이터 베이스를 통해서 획득된 자료를 이용해 동해와 그 주변을 대상으로 하는 지역의 ($32-45^{\circ}$E, $122-148^{\circ}$N) 상부 670km까지의 3차원 구조도 작성을 위한 초기 모델을 구축하였으며, 이 절차를 최대한 자동화하는 프로그램을 포트란을 이용해 만들어보았다. 연구 지역에 대한 곡율을 계산하기 위해 표준타원체 모델인 WGS84과 geoid undulation 모델인 EGM96을 사용했으며 지형 고도 자료는 GTOPO30, GLOBE 1.0, 그리고 Smith and Sandwell 데이터베이스를 사용하여 지구 중심으로부터 지표까지의 거리를 구하였다. 연구지역은 $0.25^{\circ}$간격으로 나누었으며 총 5777개의 격자점을 정의하였으며 각각의 격자점에 1차원 수직구조를 부여함으로써 3차원 모델을 구축하였다. 그리고 지형적으로나 지질학적으로 유사한 지역을 하나의 구역으로 정의하고 동일한 수직구조를 부여함으로써 모든 격자점에 1차원 수직구조를 정의하지 않도록 하였다. 본 연구에서는 지표 지질은 모델에 고려하지 않았지만 지형학적으로 의미가 있는 분지나 수평적으로 불균질성이 뚜렷한 지역을 중심으로 연구 지역의 리젼을 정의하였다. 중요 리젼에 대한 지각구조에 대해서는 기존의 문헌을 통해 모델치를 정의하였으며 지각 하부부터 상부 670km에 대한 부분은 Task Group에서 제시한 표준 모델을 이용했다. 모델을 정의하기 위해 주어진 격자점에 대한 지구 중심으로부터 지오이드까지의 거리, 지오이드로부터 지표까지의 거리를 정의해주었으며, 각 격자점의 수직구조를 정의하기 위해 깊이에 따른 각 매질의 밀도, P파의 속도, S파의 속도, P파에 대한 Q값, S파에 대한 Q값을 정의 해주었다. S파의 속도를 구하기 위해서 지구 내부 물질을 포아송 매질이라는 가정 하에, 관계식을 $Vp{\;}={\;}SQRT(3){\;}{\times}{\;}Vs$ 이용하였다. 획득한 모델치들을 이용해 동해와 동해 인근 지역에 대한 초기모델을 구축하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.11a
• /
• pp.497-500
• /
• 2007

지열류량은 지열자원 개발 시 지열 이상대를 찾는데 있어서 중요한 자료로 사용된다. 우리나라의 지체구조별 지열류량 평균은 경기육괴 66 $mW/m^2$, 옥천습곡대 65 $mW/m^2$, 영남육괴 60 $mW/m^2$, 경상분지 72 $mW/m^2$, 연일분지 75 $mW/m^2$이다. 이러한 대륙 내의 지표 지열류량은 상부 지각내의 방사성 동위원소 붕괴에 의한 열생산율(${\sim}40%$)과 하부지각 및 상부맨틀에서부터 전도되어 올라온 지열류량(${\sim}60%$)으로 설명할 수 있다. 따라서 지열류량의 결정에 있어서 열생산율의 정보는 중요한 부분을 차지한다. 열생산율은 지각 내에 존재하는 주요 방사성 동위 원소인 U, Th, K의 붕괴열에 의한 것이며, 열생산율의 측정은 gamma-ray log 자료를 이용하는 방법과 화학분석을 통한 방법이 있다. 이 연구에서는 두 가지 방법을 이용하여 총 123개(화강암 86개, 편마암 37개) 지점에서의 열생산율을 산출하였다. 화강암의 열생산율 평균은 2.15 ${\mu}W/m^3$이며, 편마암의 열생산율 평균은 2.22 ${\mu}W/m^3$로 나타났다. 지체구조별 열생산율의 평균은 경기육괴 2.52 ${\mu}W/m^3$, 옥천습곡대 2.16 ${\mu}W/m^3$, 영남육괴 2.35 ${\mu}W/m^3$, 경상분지 2.01 ${\mu}W/m^3$로 나타났다. 지체 구조별 열생산율과 지열류량의 상관성 분석에서 우리나라의 경우 지열류량이 높은 지역에서 열생산율이 낮은 경향을 보인다. 따라서 열생산율이 지표 지열류량을 결정하는데 있어서 가장 중요한 요소가 아님을 확인할 수 있다.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.23-23
• /
• 2010

스발바드 서측에 위치하는 스피츠버겐 하부의 암석권맨틀의 분화시기를 규명하기 위하여, 두 개의 독립적인 방사성동위원소 시스템인 Lu-Hf과 Re-Os 시스템을 스피넬 페리도타이트(spinel peridotite)에 활용하였다. 전암에 대한 Re-Os 계통(Re-Os 에러크론, 알루미노크론, Re-결핍연대 등)은 연구지역의 페리도타이트가 대류하는 맨틀로부터 고기원생대/후기시생대에 분리되었음을 지시한다. 흥미롭게도 이런 연대는 페리도타이트내 단사휘석 결정들에 대하여 얻어진 Lu-Hf 에러크론 연대와 일치한다. 또한 시료 내에 지구화학적으로 기록된 현무암질 액의 결핍정도 역시 계통적으로 위의 연대를 지지한다. 위 연대는 스피츠버겐 서측부에 보고된 가장 오래된 지각의 연대와 일치한다. 따라서 연구지역의 암석권맨틀이 연약권으로부터 분리된 것은 접촉하고 있는 지각과 동시기적으로 이루어진 사건임을 알 수 있다. 연구지역은 팔레오세 이래로 복잡한 지구조적 응력장 변화(압축에서 신장환경으로의 변화)를 겪었다. 그럼에도 불구하고 지각과 커플링된 암석권맨틀이 현존한다는 것은 연구지역내 응력장변화가 대규모의 암석권 디라미네이션(delamination)을 유발하지는 않았다는 것을 의미한다. 그러므로 북극권의 화산활동을 설명하기 위하여 북극권 상부맨틀에 존재한다고 알려진 듀팔(DUPAL) 같은 부화된 물질의 성인으로 일부의 연구자들이 주장하여 온 디라미네이션된 암석권맨틀의 존재는 설득력이 없다고 판단된다.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.9-26
• /
• 1999

The Ulleung Basin (Tsushima Basin) in the southwestern East Sea (Japan Sea) is floored by a crust whose affinity is not known whether oceanic or thinned continental. This ambiguity resulted in unconstrained mechanisms of basin evolution. The present work attempts to define the nature of the crust of the Ulleung Basin and its tectonic evolution using seismic wide-angle reflection and refraction data recorded on ocean bottom seismometers (OBSs). Although the thickness of (10 km) of the crust is greater than typical oceanic crust, tau-p analysis of OBS data and forward modeling by 2-D ray tracing suggest that it is oceanic in character: (1) the crust consists of laterally consistent upper and lower layers that are typical of oceanic layers 2 and 3 in seismic velocity and gradient distribution and (2) layer 2C, the transition between layer 2 and layer 3 in oceanic crust, is manifested by a continuous velocity increase from 5.7 to 6.3 km/s over the thickness interval of about 1 km between the upper and lower layers. Therefore it is not likely that the Ulleung Basin was formed by the crustal extension of the southwestern Japan Arc where crustal structure is typically continental. Instead, the thickness of the crust and its velocity structure suggest that the Ulleung Basin was formed by seafloor spreading in a region of hotter than normal mantle surrounding a distant mantle plume, not directly above the core of the plume. It seems that the mantle plume was located in northeast China. This suggestion is consistent with geochemical data that indicate the influence of a mantle plume on the production of volcanic rocks in and around the Ulleung Basin. Thus we propose that the opening models of the southwestern East Sea should incorporate seafloor spreading and the influence of a mantle plume rather than the extension of the crust of the Japan Arc.

• Journal of the Korean earth science society
• /
• v.34 no.2
• /
• pp.109-119
• /
• 2013

Duibaejae basalts from Goseong, Gangwon-do, are divided into the lower basalt and the upper basalt depending on the properties, such as occurrence, mineral compositions, and major and trace compositions of the basalts. The lower basalts have characteristics of agglomerate rocks as well as contain, crustal and mantle xenoliths, and olivine, pyroxene, and plagioclase xenocrysts. The upper basalts with columnar joints contain relatively more mantle xenolith and olivine xenocryst than the lower basalts. The major and trace element compositions suggest that the composition of the upper basalts is close to primary magma composition. Enrichment and depletion patterns of the trace and the rare-earth elements of the lower basalts are similar to those of the upper basalts, whereas the lower basalts are more LREE enriched than the upper basalts. The source magmas of the lower and upper basalts from Duibaejae volcanic edifice were generated from about 0.8-1.2% and 3.7-4.0% batch melting of garnet peridotite, respectively. The abundance of granite xenolith, and plagioclase and quartz xenocrysts with reaction rim indicates that the lower basalts, compared with upper basalts, might have been assimilated with the crustal materials during ascending to surface.

• Journal of the Korean Geophysical Society
• /
• v.4 no.1
• /
• pp.21-33
• /
• 2001

Simultaneous inversion of first-arrivals of local earthquakes recorded by the Korea Meteorological Administration(KMA) seismograph network from 1991 to 1998 is made to derive 1D crustal velocity structure of the Korean peninsula. Twenty-nine events with 178 observations are used in the inversion. Average crustal P-wave velocity turns out to be about 6.3 km/sec, and crustal thickness and upper mantle P-wave velocity are estimated as 33 km and 7.9 km/sec, respectively. Results of inversion indicate the possibility of the low velocity layer in the lower crust. Joint inversion is applied to estimate hypocenters, station delays, and velocities simultaneously. Relative station corrections for 11 stations range from zero to about 1.2 sec. Analysis of the synthetic data shows that estimates of hypocenter locations and station corrections as well as averaged crustal structure are reliable for the given data set..

• The Journal of the Petrological Society of Korea
• /
• v.21 no.1
• /
• pp.13-30
• /
• 2012

Phlogopite and kaersutite, showing distinctively different textural characteristics compared to the common phenocrysts, are observed in alkali basalt from Jeju Island. They occur as large crystals (2-10 mm) in host basalts, whereas fine-grained phlogopite and kaersutite occur in ultramafic mantle xenoliths and mafic gabbroic xenoliths, respectively, as an interstitial and microvein phases, or in corona textures (<1 mm). This textural characteristics of fine-grained grains clearly indicates secondary in origin. Phlogopite contains high $TiO_2$(4.1-6.9 wt%) and F(2.8-4.6 wt%) and relatively high mg#[=100Mg/(Mg+$Fe^t$) in mols, where $Fe^t$ is total iron](88-80), whereas kaersutite has high $TiO_2$(5.6-6.11 wt%) and much lower mg#s(68-64). Our textural observations and the geochemical character of these hydrous minerals suggest that they were unrelated to each other and mica formation happened early in the upper mantle before the mantle xenoliths had been trapped. In contrast, kaersutite formation has happened later, probably during the late stage of crystallization as intracrustal processes. The presence of phlogopite and kaersutitic amphibole is a direct evidence for K-, Ti-, F- and $H_2O$-bearing fluid/melt percolation in the lithosphere beneath Jeju Island, indicating that they are product of interaction between host rock/peridotite/fluid-melt. Thus, the upper mantle/lower crust beneath Jeju Island are metasomatized to various extents, characterized by a change in major metasomatic hydrous minerals from phlogopite to amphibole with decreasing depth.

• The Journal of Engineering Geology
• /
• v.4 no.3
• /
• pp.333-341
• /
• 1994

The low velocity body was detected during the invesfigation of the crustal structune and upper mantle in the Korean Peninsula using ray method and observational seismic data. We observed the arrival time delays of P and S waves that pass through the Bugok hot spring area and the chugaryong rift zone in the Korean Peninsula. The present geothermal exploration accounts for the high heat flow in these regions, suggesting that the area are the 'delay shadows' produced by a deep, low velocity body(Resenberg et aL, 1980). We tried to verify the hypothesis that the low-velocity body is caused by the partial melting in the lower crust can be explained by the lateral variation(inhomogeneous model) of the lower crust velocity using Ray Method(Cerveny and Psencik, 1983).

• Geophysics and Geophysical Exploration
• /
• v.6 no.1
• /
• pp.40-52
• /
• 2003

Despite the various opening models of the southwestern part of the East Sea (Japan Sea) between the Korean Peninsula and the Japan Arc, the continental margin of the Korean Peninsula remains unknown in crustal structure. As a result, continental rifting and subsequent seafloor spreading processes to explain the opening of the East Sea have not been adequately addressed. We investigated crustal and sedimentary velocity structures across the Korean margin into the adjacent Ulleung Basin from multichannel seismic reflection and ocean bottom seismometer data. The Ulleung Basin shows crustal velocity structure typical of oceanic although its crustal thickness of about 10 km is greater than normal. The continental margin documents rapid transition from continental to oceanic crust, exhibiting a remarkable decrease in crustal thickness accompanied by shallowing of Moho over a distance of about 50 km. The crustal model of the margin is characterized by a high-velocity (up to 7.4 km/s) lower crustal (HVLC) layer that is thicker than 10 km under the slope base and pinches out seawards. The HVLC layer is interpreted as magmatic underplating emplaced during continental rifting In response to high upper mantle temperature. The acoustic basement of the slope base shows an igneous stratigraphy developed by massive volcanic eruption. These features suggest that the evolution of the Korean margin can be explained by the processes occurring at volcanic rifted margins. Global earthquake tomography supports our interpretation by defining the abnormally hot upper mantle across the Korean margin and in the Ulleung Basin.

• Journal of the Korean earth science society
• /
• v.32 no.6
• /
• pp.602-612
• /
• 2011

Jeju Island, a volcanic island located in South Korea, has been one of the main targets of geophysical and/or geological studies because of its tectonic importance related to the volcanism and tectonic link to the southern part of the Korean Peninsula. Recently, as a number of broad-band magnetotelluric (MT) measurements were made, we have examined the deep part of the island. In such an insular setting, it is not easy to properly recover the deep structures such as the lower crust and the upper crust using MT data, because their low-frequency components are strongly affected by the surrounding sea of the island. In this study, we apply the sea-effect correction to the existing MT data collected at a total of 102 sites in Jeju Island. The sea-effect correction makes remarkable changes in the observed MT data at frequencies below 1 Hz, clearly indicating the existence of a conductive lower crust. The 2-D inversion results for both Jeju Southern Line (JSL) and Jeju Northern Line (JNL) show that the transition zone separating the resistive upper crust and conductive lower crust exists at a depth of 20 km on average.