• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1038-1044
• /
• 2017

We are working on improving the performance by applying the three-dimensional design element to the rotor blades of high pressure supersonic impulse turbine that drives turbo pump of liquid rocket engine. In this paper, based on the shape of a rotor blade of a turbopump turbine designed in the past, a three-dimensional shape is applied to a rotor blade through a stacking line change such as sweep and dihedral. After performing the flow analysis, the changes in the turbine performance characteristics for each design element were carefully examined and the results were summarized.

• Tunnel and Underground Space
• /
• v.20 no.6
• /
• pp.408-420
• /
• 2010

It is important to forecast the final deformation of a tunnel during construction for evaluating its mechanical stability. In this study, the final deformation of a tunnel is forecasted by fitting tunnel deformations measured while excavating to a displacement function and exterpolating it. The tunnel for the study was built in two stages divided into an upper and a lower part. During the lower part construction of the tunnel, the displacement function forecasts the final incremental displacement well compared to the increment measured after completion of the tunnel. It is because the critical initial displacement occurred on passing the measurement pins can be adequately measured during excavating the lower part, which can not be measured during the upper part excavation of the tunnel.

• Korean Journal of Remote Sensing
• /
• v.6 no.2
• /
• pp.75-88
• /
• 1990

NOAA 위성의 narrow-band AVHRR(Advanced Very. High Resolution Radiometer) 적 외선 채널과 broad-band 0.2 - 50$\mu\textrm{m}$ 영역의 ERBE(Earth Radiation Budget Experiment) scanning instrument에 의하여 관측된 radiance로부터 추정된 지구의 대기 외장파복사량 (Outgoing Longwave Radiation:OLR) 이 비교조사되었다. 이를 위하여 1985년 4월, 7월, 10월과 1986년 1월에 위성에서 관측된 radiance를 각각 이용하였고 비교된 OLR은 위도와 경도가 각각 2.5$^{\circ}$ 간격으로 구분된 grid내에서 일치(collocate)시켜 지역별(zonal), 그리고 전지구(global)규모 로 비교되었다. ERBE와 AVHRR에 의하여 각각 추정된 OLR값의 차(ERBE minus AVHRR)에 의한 분석 결과는 주간의 경우 -1~2 W/m$^2$의 값과 야간의 경우 4~7 W/m$^2$의 값으로 비교적 좋은 일치를 보였지만 이들의 RMS는 하절(6월)에 12 W/m$^2$와 동절(12월)에 5 W/m$^2$의 값으로 다소 높은 차이를 보였다. 한편, 이들 OLR값을 관측지역에 따라 큰 차 이를 나타내어 사막지역과 아열대고기압(subtropical ocean)대에서는 상반된 결과를 보였다. 이들 지역에 대한 차이는 지역적 기온구조와 지표온도의 영향을 다 고려하지 못하고 OLR 측정치를 도 출하는 대기복사모델(radiation model)의 regional systematic bias에서 기인된 것으로 해석된다. 즉 사막의 지표역전층에 대한 AVHRR과 해면의 대기구조에 대한 ERBE의 OLR은 상반된 영향을 보였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.1
• /
• pp.235-242
• /
• 2019

Self-reciprocal polynomials over finite fields are useful in several applications, including reversible codes with read-backward properties. This paper is a study on 90/150 CA with characteristic polynomials of maximal weight polynomials, which is one of the self-reciprocal polynomials. In this paper, we propose a decision method for determining the existence of 90/150 MWCA corresponding to the maximum weight polynomial of degree 2n using n-cell 90/150 CA with transition rule <$100{\cdots}0$>. The proposed method is verified through experiments.

• Korean Journal of Environmental Biology
• /
• v.27 no.4
• /
• pp.323-333
• /
• 2009

Parabens are alkyl esters of p-hydroxybenzoic acid, which are widely used in foods, cosmetics, and pharmaceutic products as preservatives. Absorbed parabens are metabolized fastly and excreted. Actually human body is exposed to complex mixture of parabens. Safety assessment at various toxicological end points revealed parabens have a little acute, subacute and chronic toxicities. Some reports have argued that as parabens have estrogenic activity, they are associated with the incidence of breast cancer through dermal absorption by cosmetics. There is an inference that antiandrogenic activity of parabens may give rise to a lesion of male reproductive system, but also there is an contrary. At cellular level, parabens may inhibit mitochondrial function of sperms and androgen production in testis, but also there is an contrary. Parabens seem to have little or no toxicity in embryonic development. Parabens can cause hemolysis, membrane permeability change in mitochondria and apoptosis, suggesting cellular toxicity of parabens. Parabens evoked endocrine disruption in several fish species and have toxic effect on small invertebrates and microbes. Therefore, the toxicity of parabens should be considered as a potentially toxic chemical in the freshwater environment. In conclusion, though parabens may be considered as a low toxic chemical, more definite data are required concerning the endocrine disrupting effect of parabens on human body and aquatic animals according to route and term of exposure as well as the residual concentration of parabens.

• Journal of Aquaculture
• /
• v.11 no.3
• /
• pp.353-361
• /
• 1998

Genetic analysis of body pigmentation pattern has been conducted by the reciprocal monohybrid and back crosses using the wild type zebrafish, Danio rerio, and its aquarium morphs (mutants), leopard danio. Also, the effect fo pigmentation mutation was investigated with regard to the survival rates of eggs and larvae for the first 15 days after fertilization. As a result, the pattern pigment distribution was inherited by a single gene having two alleles, and which was basically followed by the principle of dominace and segregaion in Mendelian inheritance. A locus for pigment pattern turned out to be located on an autosomal chromosome. Average survival rates estimated from the various crosses between, and within, wild type zebrafish and leopard danio were as follows ; they were 80.6${\pm}$4.8% from the crosses within leopard danios ($L{\times}L$), 70.6${\pm}$4.2% between leopard female and wild type male ($L{\times}Z$), 73.2${\pm}$2.0% between wild type female and leopard male ($Z{\times}L$), and 83.8${\pm}$6.7% within wild type zebrafish ($Z{\times}Z$). These results indicated that the leopard danio, which were reported as an "aquarium morph" several decades ago and also known as a mutant in pigmentation pattern of the wild type zebrafish, seemed to be genetically stable like the wild type of zebrafish.zebrafish.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.127-134
• /
• 2014

This paper presents a study on the radiation characteristics of low-VHF band electrically small antenna for direction finding. Firstly, it is simulated the antenna for mounting on flat ground and tank model(in 40MHz), and measured for mounting 1/10 scaled model(in 400 MHz). In case of flat ground feed at ${\phi}=0^{\circ}$, $180^{\circ}$(xz-plane), yz-plane $E_{\phi}$ (H-plane) and xz-plane $E_{\theta}$ (E-plane) radiation patterns are hemispheric omni-direction due to effect of narrow ground side. Then, in case of tank model, it is shown equally in case of the flat ground, yz-plane $E_{\phi}$ (H-plane) and xz-plane $E_{\theta}$ (E-plane) radiation patterns are hemispheric omni-direction nearly without effect of mounting position. Therefore, the suggested electrically small antenna for direction finding, in case of mounting on ground narrow side xz-plane(E-plane), is shown more stable radiation patterns as direction finding antenna.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.29-41
• /
• 2007

Structural design, like other complex decision problems, involves many trade-offs among competing criteria. Although mathematical programming models are becoming increasingly realistic, they often have design limitations, that is, there are often relevant issues that cannot be easily captured. From the understanding of these limitations, a decision-support system is developed that can generate some useful alternatives as well as a single optimum value in the optimization of steel frame structures. The alternatives produced using this system are "good" with respect to modeled objectives, and yet are "different," and are often better, with respect to interesting objectives not present in the model. In this study, we created a decision-support system for designing the most cost-effective moment-resisting steel frame structures for resisting lateral loads without compromising overall stability. The proposed approach considers the cost of steel products and the cost of connections within the design process. This system makes use of an optimization formulation, which was modified to generate alternatives of optimum value, which is the result of the trade-off between the number of moment connections and total cost. This trade-off was achieved by reducing the number of moment connections and rearranging them, using the combination of analysis based on the LRFD code and optimization scheme based on genetic algorithms. To evaluate the usefulness of this system, the alternatives were examined with respect to various design aspects.

• Journal of Korean Society of Steel Construction
• /
• v.19 no.1
• /
• pp.15-27
• /
• 2007

Over the past decade, labor costs have increased relative to the cost of material hardware according to analysts in the construction industry. Therefore, the minimum weight design, which has been widely adopted in the literature for the optimal design of steel structures, is no longer the most economical construction approach. Presently, although connection- related costs is crucial in determining the most cost-effective steel structures, most studies on this subject focused on minimum-weight design or engaged in higher analysis. Therefore, in this study, we proposed a fabrication scheme for the most cost-effective moment-resisting steel frame structures that resist lateral loads without compromising overall stability. The proposed approach considers the cost of steel products, fabrication, and connections within the design process. The optimal design considered construction realities, with the optimal trade-off between the number of moment connections and total cost was achieved by reducing the number of moment connections and rearranging them using the combination of analysis that includes shear, displacement and interaction value based on the LRFD code and optimization scheme based on genetic algorithms. In this study, we have shown the applicability and efficiency in the examples that considered actual loading conditions.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.13 no.6
• /
• pp.117-127
• /
• 2018

When we face an unexpected challenge, should we stick to the original plan and persevere through the series of challenges? Or shall we pivot and transform our original plan into something new by taking into account the newly acquired information? This perennial question of perseverance versus pivot as two competing problem-solving strategies has puzzled our every day lives. In this study, based on the large-scale, nation-wide survey on entrepreneurship, I found that individual entrepreneurial orientation, which consists of innovativeness, risk-taking, and proactiveness, promotes an individual's tendency to choose new problems to solve. Perseverance strategy was found to positively moderates the relationship between innovativeness and the tendency to choose new problems to solve, whereas the relationship between risk-taking and the tendency to choose new problems to solve was found to be negatively moderated by perseverance strategy. Pivot strategy, on the other hand, was found to be positively moderates the relationship between proactiveness and the tendency to choose new problems to solve. These findings contributes to the stream of individual entrepreneurial orientation research by empirically testing two competing problem-solving strategies of perseverance and pivot to show their interaction effects with entrepreneurial orientation. Also the findings of this study expand the potential outcome of entrepreneurial orientation by adding an individual's tendency to choose new problems to solve rather than what he or she has already experienced before.