• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.335-341
• /
• 2015

Recently a demand for high precision absolute position transducer is increasing in order to control thickness in steel industry. LVDT (linear variable differential transformer) is widely used to measure the absolute position in the linearly moving cylinder under poor factory environment. In this paper we implement the three phase LVDT with a high resolution of one micron and L/D (LVDT to digital) converter. First we designed U, V, and W three phase signaling using FPGA. Second a pulse output algorithm is designed for position information with A and B phase waveforms. Finally the performance is compared with previous sensors. Experiments show that the linearity deviation error is 0.009788 [mm] and the average sinusoidal THD is 0.0751%, which means 2.2% and 33% more improved result than the previous sensors respectively.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2471-2473
• /
• 2003

인간의 안구는 색과 모양을 식별하는 데에 관여하는 원추 세포와 물체의 명암을 구분하는 간상 세포로 구성되어지는 시세포를 가진다. 망막 위에 분포되어 있는 시세포들은 시축을 중심으로 각기 다른 밀도로 분포 되어 있다. 특히 광축과 만나는 중심 지역은 Fovea라고 하는 직경 1mm 정도의 작은 우물을 이루고 있는데 원추 세포들이 고해상도로 분포되어 있고 시신경과 일대일로 연결되어 있어 시각 처리의 중심이 된다. 특히, 글자나 물체를 인식하기 위해 인간은 대상물을 응시하여 대상물의 영상이 Fovca영역에 맺히도록 추적 운동을 계속한다. 본 논문에서는 인간의 눈과 유사한 망막 모델의 하나인 Log-polar Image를 이용한 물체 인식을 위해 물체를 Log-polar Image Plane의 중심에 위치시키기 위한 모멘텀(Momentum)기반 정합 알고리즘(Alignment Algorithm)을 제시한다. 이는 눈동자 운동이 가능한 능동형 시각 장치의 Tracking 및 Pursuit 동작 중에 밭생하는 추적 오차를 보상함으로써 운동 중에도 효과적인 물체 인식이 가능하게 한다. 또한, 물체를 Log-polar Image Plane의 중심에 위치시킴으로써 물체의 위치 이동, 회전이동 그리고 크기 변화에 무관하게 물체를 인식한 수 있음을 제시한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.451-455
• /
• 2003

최근 LCD제품은 고유한 특장인 경박단소가 요구되면서, 기존의 Back Light Unit(BLU) 로는 대응할 수 없는 사양으로 진화되고 있다. 기존과 동일한 설계개념으로 접근시에 시장에서 요구되는 중량, 두께, 휘도의 사양을 만족시킬 수 없으며, BLU의 주요광원인 CCFL(Cold Cathod Fluorescent Lamp)의 휘도 개선 또 한 한계에 다다르고 있다. 따라서 앞으로의 BLU 의 고성능화는 최적화, 고효율화로의 개발 전개가 예상되며, LCD의 고해상도에 따른 투과율 저하를 보상하기 위한 고품질 BLU의 개발이 시급한 상황이다. 본 연구에서는 이러한 BLU의 고효율화, 고품질화를 달성하기 위한 고성능 도광판 개발과 관련하여, 실물 제작에 앞서 광학시뮬레이션을 통한 이론적 접근을 수행하였다. 연구 결과, 상측에서 정각 $90^{\circ}$ 에 높이 $50{\mu}m$ 하측에서 정각 $80^{\circ}$ 높이 $28{\mu}m$일때 평균조도가 71.52W/m^2 구현됨을 알 수 있다. 이 결과를 바탕으로 통상의 인쇄 방식 도광판에 비해서 약 20% 정도의 휘도향상이 가능함을 알 수 있었다. 또한 차후 본 결과를 바탕으로 한 실물 제작을 통해 설계 시뮬레이션 결과와의 비교를 통해서 정확한 예측이 가능한 시스템을 구현함을 목적으로 하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.32-32
• /
• 2008

X-ray detector는 의료용, 산업용 등 다양한 분야에서 사용되어지고 있으며 기존의 Analog X-ray 방식의 환경오염, 저장공간 부족, 실시간 분석의 어려움 등의 문제점들을 해결하기 위하여 Digital X-ray로의 전환과 연구가 활발하며 이에 따른 관심도 높아지고 있는 살점이다. Digital X-ray detector는 p-영역과 n-영역 사이에 아무런 불순물을 도핑하지 않은 진성반도체(intrinsic semiconductor) 층을 접합시킨 이종접합 PIN 구조의 photodiode 이다. 이 소자는 역바이어스를 가해주면 p영역과 n영역 사이에서 캐리어 (carrier)가 존재하지 않는 공핍 영역이 발생하게 된다. 이런 공핍 영역에서 광흡수가 일어나면, 전자-정공 쌍이 발생한다. 그리고, 발생한 전자-정공 쌍에 전압이 역방향으로 인가되는 경우, 전자는 양의 전극으로 이동하고, 정공은 음의 전극으로 이동한다. 이와 같이, 발생한 캐리어들을 검출하여 전기적인 신호로 변환 시킨다. 고해상도의 Digital X-ray detector를 만들기 위해서는 누설전류에 의한 noise 감소와 소자의 높은 안정성과 내구성을 위한 높은 breakdown voltage를 가져야 한다. 본 연구에서는 Digital X-ray detector의 leakage current 감소와 breakdown voltage를 높이기 위하여 guradring과 gettering technology를 사용하여 전기적 특성을 분석하였다. 기판으로는 $10k\Omega{\cdot}cm$ resistivity를 갖으며, n-type <111>인 1mm 두께의 4인치 Si wafer를 사용하였다. 그리고 pixel pitch는 $100{\mu}m$이며 active area는 $80{\mu}m{\times}80{\mu}m$인 $32\times32$ array를 형성하여 X-ray를 조사하여 소자의 특성을 평가 하였다.

• Journal of Broadcast Engineering
• /
• v.25 no.6
• /
• pp.836-844
• /
• 2020

A very large number of pixels is required to generate a computer generated hologram (CGH) with a large-size and wide viewing angle equivalent to that of an analog hologram, which incurs a very large amount of computation. For this reason, a high-performance computing device and long computation time were required to generate high-definition CGH. To solve these problems, in this paper, we propose a technique for generating high-definition CGH by arraying the pre-calculated low-definition CGH and multiplying the appropriately-shifted concave lens function. Using the proposed technique, 0.1 Gigapixel CGH recorded by the point cloud method can be used to calculate 2.5 Gigapixels CGH at a very high speed, and the recorded hologram image was successfully reconstructed through the experiment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.3 s.333
• /
• pp.25-34
• /
• 2005

In this paper, we analyzed and measured the electrical crosstalk characteristics of a triplex transceiver module for ethernet Passive optical networks(EPONS). And we improved the electrical crosstalk levels using Dummy ground lines with signal lines. The triplex transceiver module consists of a laser diode as a transmitter, a digital photodetector as a digital data receiver, and a analog photodetector as a community antenna television signal receiver. And there are integrated on silicon substrate. The digital receiver and analog receiver sensitivity have to meet -24 dBm at $BER=10^{-l2}$ and -7.7 dBm at 44 dB SNR. And the electrical crosstalk levels have to maintain less than -86 dB from DC to 3 GHz. From analysis and measurement results, the proposed silicon substrate structure that contains the Dummy ground line with $100\;{\mu}m$ space from signal lines and separates 4 mm among devices respectively, is satisfied the electrical crosstalk level compared to simple structure. This proposed structure can be easily implemented with design convenience and greatly reduced the silicon substrate size about $50\%$.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.29-36
• /
• 2011

Dithering scheme has been widely used to improve the resolution of DCO(Digitally Controlled Oscillator) in conventional ADPLLs(All Digital Phase Locked Loop). In this paper a new resolution improvement scheme is proposed where a simple DAC is employed to overcome the problems of dithering scheme. A 2.4GHz LC-based DCO has been designed in a $0.13{\mu}m$ CMOS process with an enhanced frequency resolution for wireless local area network applications. It has a frequency tuning range of 900MHz and a resolution of 58.8Hz. The frequencies are controled by varactors in coarse, fine, and DAC bank. The DAC bank consists of an inversion mode NMOS varactor. The other varactor banks consist of PMOS varactors. Each varactor bank is controlled by 8bit digital signal. The designed DCO exhibits a phase noise of -123.8dBc/Hz at 1MHz frequency offset. The DCO core consumes 4.2mA from 1.2V supply.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.132-137
• /
• 2006

The second part of paper related rotor failure is to evaluate that the axial magnetic flux measurement could be used as a tool of the condition monitoring system for the induction motor and to develope the diagnostic algorithm for the various fault in the electric motors. The magnetic leakage flux signal is captured by the flux coil located at the end of motor without the disturbance of the operation. And the signal is analyzed both time and frequency domain to detect the failure of the motor. Specific signature can be described in tin and frequency domain for each fault of the motor. The experimental test found that the rotor failures - broken rotor bar, broken end ing and rotor eccentricity, could be detected from the spectrum with high resolution. The method of detecting the rotor fault was found by analysing the specific frequency and the sideband of the rotor bar pass frequency from axial leakage flux spectrum. In addition the optimal flux coil and measuring equipment for the axial leakage flux measurement was verified and the diagnostic method for the detection of the rotor related failure was developed.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.349-355
• /
• 2012

Information technology improves convenience, safety, and performance of automobiles. Recently, a lot of algorithms are studied to provide safety and environment information for driving, and lane detection algorithm is one of them. In this paper, we propose a lane detection algorithm that reduces the amount of calculation by reducing region of interest (ROI) after preprocessing. The proposed algorithm reduces the area of ROI a lot by determining the candidate regions near lane boundaries as V-ROI so that the amount of calculation is reduced. In addition, the amount of calculation can be maintained almost the same regardless of the resolutions of the input images by compressing the images since the lane detection algorithm does not require high resolution. The proposed algorithm is implemented using C++ and OpenCV library and is verified to work at 30 fps for realtime operation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.131-137
• /
• 2005

The purpose of this paper is to evaluate the axial magnetic flux measurement could be used as a tool of the condition monitoring system for the induction motor and to develope the diagnostic algerian for the electric motors. The magnetic leakage flux signal is captured by the flux coil located at the end of motor without the disturbance of the operation. And the signal is analyzed both time and frequency bases to detect the failure of the motor. Specific signature can be described in time and frequency domain for each faults of the motor. The spectrum of the signal was found more useful for the monitoring purpose. The supply voltage imbalance and tin to turn failure of the stator winding could be detected by analysing the specific sidebands of the axial flux and sideband of the rotor bar pass frequency with the high resolution spectrum. The goal of this study verity that the axial flux measurement for the induction motor is a powerful tool for the diagnostic method and develope the algorithm to detect the fault.