• Title/Summary/Keyword: 상대 민감도분석

Search Result 50, Processing Time 0.026 seconds

Sensitivity analysis of the FAO Penman-Monteith reference evapotranspiration model (FAO Penman-Monteith 기준증발산식 민감도 분석)

  • Rim, Chang-Soo
    • Journal of Korea Water Resources Association
    • /
    • v.56 no.4
    • /
    • pp.285-299
    • /
    • 2023
  • Estimating the evapotranspiration is very important factor for effective water resources management, and FAO Penman-Monteith (FAO P-M) model has been applied for reference evapotranspiration estimation by many researchers. However, because various input data are required for the application of FAO P-M model, understanding the effect of each input data on FAO P-M model is necessary. Therefore, in this study, for 56 study stations located in South Korea, the effects of 8 meteorological factors (maximum and minimum temperature, wind speed, relative humidity, solar radiation, vapor pressure deficit, net radiation, ground heat flux), energy and aerodynamic terms of FAO P-M model, and elevation on FAO P-M reference evapotranspiration (RET) estimation were analyzed. The relative sensitivity analysis was performed to determine how 10% increment of each specific independent variable affects a reference evapotranspiration under given set of condition that other independent variables are unchanged. Furthermore, to select the 5 representative stations and perform the monthly relative sensitivity analysis for those stations, 56 study stations were classified into 5 clusters using cluster analysis. The study results showed that net radiation was turned out to be the most sensitive factor in 8 meteorological factors for 56 study stations. The next most sensitive factor was relative humidity, solar radiation, maximum temperature, vapor pressure deficit and wind speed, followed by minimum temperature in order. Ground heat flux was the least sensitive factor. In case of ground surface condition, elevation showed very low positive relative sensitivity. Relativity sensitivities of energy and aerodynamic terms of FAO P-M model were 0.707 for energy term and 0.293 for aerodynamic term respectively, indicating that energy term was more contributable than aerodynamic term for reference evapotranspiration. The monthly relative sensitivities of meteorological factors showed the seasonal effects, and also the relative sensitivity of elevation showed different pattern each other among study stations. Therefore, for the application of FAO P-M model, the seasonal and regional sensitivity differences of each input variable should be considered.

The Sensitivity Analysis of Parameters of Urban Runoff Models due to Variations of Basin Characteristics (I) - Development of Sensitivity Analysis Method - (유역특성 변화에 따른 도시유출모형의 매개변수 민감도분석(I) -민감도분석방법의 개발-)

  • Seo, Gyu-U;Jo, Won-Cheol
    • Journal of Korea Water Resources Association
    • /
    • v.31 no.3
    • /
    • pp.243-252
    • /
    • 1998
  • In this study, the new dimensionless values were defined and proposed to determine the parameters of urban runoff models based on the relative sensitivity analysis. Also, the sensitivity characteristics of each parameter were investigate. In order to analyze the parameter sensitivities of each model, total runoff ratio, peak runoff ratio, runoff sensitivity ratio, sensitivity ratio of total runoff, and sensitivity ratio of peak runoff were defined. $$Total\;runoff\;ratio(Q_{TR})\;=\;\frac{Total\;runoff\;of\;corresponding\;step}{Maximum\;total\;runoff}$$$$Peak\;runoff\;ratio(Q_{PR})\;=\;\frac{Peak\;runoff\;of\;corresponding\;step}{Maximum\;peak\;runoff}$$$$Runoff\;sensitivity\;ratio(Q_{SR})\;=\;\frac{Q_{TR}}{Q_{PR}}$$ And for estimation of sensitivity ratios based on the scale of basin area, rainfall distributions and rainfall durations in ILLUDAS & SWMM, the reasonable ranges of parameters were proposed.

  • PDF

Hydrological Modeling for Estimation of Runoff in Unmeasured Mountainous Area: Application to the Var Sub-Catchment, France (미계측 산간지역의 유량추정을 위한 수문 모델링: 프랑스 Var 소유역에 적용)

  • Ji Yun Jang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.256-256
    • /
    • 2023
  • 집중호우는 전 세계적으로 큰 기후변화 문제 중 하나다. 극심한 집중호우의 빈도수는 지구 온난화로 인해 지난 세기 중반 이후부터 점차 증가하고 있으며 그로인한 인적 및 물적인 피해 또한 증가하고 있다. 이러한 손상을 방지하기 위해서는 적절한 설계 홍수량을 계산하는 것이 중요하다. 최근에는 미계측지역의 유출량 추정 시 분포형 강우-유출 모델을 이용한다. 분포형 모델의 가장 큰 장점은 소유역의 분할 과정을 거칠 필요 없이 유역에서 무작위 점의 유출을 시뮬레이션 할 수 있다는 것이다. 본 연구에서는 2000년 11월 니스에 발생했던 강우를 기반으로 Var 유역의 소유역이자 미계측 지역인 프랑스 니스의 Ubac Vallone의 유출량 및 유출계수를 지형 데이터 등의 물리적 인자와 분포형 강우-유출모델인 MIKE SHE를 이용하여 추정하였다. 또한, 입력되는 인자의 상대적 중요성을 파악하기 위해 민감도 분석을 수행하였다. 본 연구에서는 각 인자에 대한 상대민감도 분석을 바탕으로, 유출량에 상대적으로 큰 영향을 미치는 인자를 제안하였다. 연구 결과, 50년, 100년 및 162년 빈도별 확률강우량에 따른 유출량을 추정하였으며, 162년의경우 총 유출량은 124,384.8m3, 최대 유출량 1.512m3/s, 유출계수 0.53으로 나타났다. 총 유출량과 첨두유량에 대한 상대 민감감도 분석 결과, 수리전도도가 1.5로 첨두유량과의 민감도가 높게 나타났으며, 대수층의 수평방향 수리전도도는 0.48로 총 유출량과의 민감도가 높게 나타났다

  • PDF

A Study on effective humidity application to Canadian fuel moisture code (캐나다 연료 수분지수에 대한 실효습도 적용성 검토에 관한 연구)

  • Park, Houng-Sek;Lee, Si-Young;Yun, Hwa-Young
    • Proceedings of the Korea Institute of Fire Science and Engineering Conference
    • /
    • 2010.04a
    • /
    • pp.448-453
    • /
    • 2010
  • 본 연구에서는 캐나다 연료 수분지수의 정확도를 보정하여, 산불발생의 예측 효율성을 높이기 위해, 기존 입력 값인 상대습도와 실효습도(Effective humidity)를 이용한 결과를 상호 비교 분석하였다. 캐나다 연료수분지수인 미세연료수분지수, 가뭄지수, 부식층수분지수의 결과를 비교한 결과 이에 따라 실효습도를 사용한 캐나다 기상지수의 민감도가 상대습도를 사용하여 산출된 지수보다 민감도가 떨어지는 것으로 조사되었다. 또한, 산불 발생 예측의 지표인 미세연료 수분 지수의 분석결과, 실효습도를 이용하여 산출된 미세연료 수분지수의 적중률이 떨어지는 것으로 조사되었다. 따라서, 미세연료 수분지수의 적용보다 상대습도의 적용이 효과적인 것으로 분석되었다.

  • PDF

Establishment of the Parameter Range by Sensitivity Analysis and Determination of Optimal Parameter for Storage Function Model (저류함수모형의 민감도분석을 통한 경계조건 설정과 최적매개변수 결정에 대한 연구)

  • Song, Jae-Hyun;Kim, Hung-Soo;Hong, Il-Pyo;Kim, Sang-Ug;Kim, Bum-Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1996-2000
    • /
    • 2006
  • 현재 국내 주요 하천의 홍수예경보시스템 운영과 다목적댐의 홍수조절관리를 위하여 수문학적 모형의 하나인 저류함수모형(storage function model)을 사용하고 있다. 저류함수모형은 산지가 많은 유역에 적합하도록 개발된 모형으로, 계산절차가 간편하고 홍수유출의 비선형성을 고려할 수 있는 방법이므로 선형모형보다 합리적이라고 알려져 있다. 그러나 실제 홍수사상에 저류함수모형을 적용하기 위해서는 적절한 매개변수의 적용이 필요하다. 현재까지 저류함수모형의 매개변수를 보정하기 위한 연구가 많이 되었지만, 실질적으로 보정된 매개변수를 실제 홍수사상에 적용함에 있어서는 많은 어려움이 존재한다. 따라서 이러한 문제점을 해결하고자 본 연구에서는 저류함수 모형 중 유역유출 매개변수를 첨두유량에 대한 상대민감도분석을 통하여 매개변수의 경계조건을 설정하고, 이 경계조건을 바탕으로 최적화기법(optimization technique)을 사용하여 과거 홍수사상에 대하여 보정을 수행하였다. 그리고 보정된 매개변수를 모의 홍수사상에 적용하기 위한 최적매개변수(optimal parameter) 결정을 위한 방법들을 제시 및 적용하여 비교 분석하였다.

  • PDF

Sensitivity Analysis of the Runoff Model Parameter for the Optimal Design of Hydrologic Structures (수공구조물의 적정설계를 위한 유출모형 매개변수의 민감도 분석)

  • Lee, Jung-Hoon;Kim, Chang-Sung;Kim, Mun-Mo;Yeo, Woon-Kwang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2007.05a
    • /
    • pp.1488-1492
    • /
    • 2007
  • 현재 도시화로 인한 유출량의 증가 및 도달시간의 단축은 도시 재해의 한 원인이 되고 있으며 그에 따라 수공구조물에 대한 적정 설계가 필요하다. 하지만 계획단계에서부터 설계에 필요한 값을 예측하기는 매우 어려운 실정이다. 더구나 개발로 인해 매개변수가 변화함에 따라 유출 영향 분석이 어려울 뿐 아니라 이에 따른 연구가 미흡한 실정이기 때문에 모형매개변수의 민감도 분석을 통해 유출영향 분석 및 수공구조물 적정설계의 중요 기반자료로 활용하고자 본 연구를 수행하였다. 본 연구에서는 민감도 분석방법 중 절대 및 상대 민감도 분석 방법을 사용하여 각 유역의 지형학적 수문학적 매개변수들의 민감도 분석을 통해 상관관계를 확인하였다. 특히 대표적인 매개변수로서 유출계수 CN의 변화에 따른 유출량 및 유출 용적의 관계를 통해 CN의 증감에 따른 유출량 및 유출용적의 변화량을 산정하고, 또한 각 매개변수들간의 회귀분석을 통해 경험식을 작성, 제안하였다. 한편 현재 국내에서 사용중인 HEC-HMS를 모의하여 매개변수의 민감도 분석을 실시하였다. 본 연구의 결과로 CN값이 개발 전후 5% 증가시 유출량은 약 10%정도 증가한다는 것을 HEC-HMS모의와 자료의 분석을 통해 확인 할 수 있었다. 본 연구의 결과에 대해 검 보정 및 추가적인 자료수집을 통한 분석이 이루어지고, 매개변수 민감도 분석을 통한 국내 실정에 맞는 매개변수도출을 위한 연구가 계속적으로 수행된다면 미계측 유역에 대한 수공구조물의 적정설계에 상당부분 기여할 것으로 판단된다.

  • PDF

천이노심 DNBR 벌점 평가방법 개선

  • 김강훈;전병순;박응준
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.10a
    • /
    • pp.389-395
    • /
    • 1995
  • 기존의 천이노심 DNBR 벌점 평가 방법을 개선하여 불확실도를 줄이고 신뢰도를 향상시키며, 적용범위를 확대함으로써 보다 실제적인 DNBR 벌점 평가 방법을 제시하고자 하였다. 이를 위하여 영광 1호기 JDFA-V5H 의 천이노심을 대상으로 하는 일련의 분석이 수행되었다. 먼저 균일노심과 천이노심을 모형화 한 기준 제어군에서의 상대적인 물성치의 변화와 축방향에서의 DNBR 거동을 분석하였고 이에 따른 최소 DNBR 의 상대적 차이로부터 최대 럴점 조건 및 벌점이 적용되는 집합체를 선정하였다. 변수 민감도 분석 결과, 최대 벌점 조건은 과출력 (120% 출력), 고압 (2420 psia) 그리고 상부노심에서 상대출력이 많은 축방향 출력 분포를 갖는 조건이 선정되었고 천이노심 벌점은 V5H에만 부과된다. 천이노심 DNBR 벌점은 배열 민감도 분석을 통하여 노심내 V5H 분율의 함수로 표현됨을 알 수 있었으며, 기존의 보수적인 방법론에 비해 최소 3% 이상의 천이노심 벌점이 감소되는것으로 나타나 추가적인 여유도의 확보로 인한 설계의 탄력성을 기대할 수 있다. 이 결과는 IFM이 존재하는 원전연료 집합체 상부에 대하여 노심의 V5H 분율이 0.02 부터 1.0 까지의 정상 및 과도상태 노심에 대하여 적용할 수 있다.

  • PDF

Sensitivity Analyses of the Meteorological Factors in the Estimation of Evapotranspiration Rates (증발산량 산정에 있어서 기상학적 요인들의 민감도 해석)

  • 임창수
    • Journal of Environmental Science International
    • /
    • v.5 no.5
    • /
    • pp.657-662
    • /
    • 1996
  • Meteorological and flux data measured from semiarid watersheds (Lucky Hills and Kendall) during the summer rainy and winter periods were used to study the sensitivity of the those variables used in the estimation of evapotranspiration rates. Relative sensitivity was examined to compare the importance of four meteorological and flux variables (net radiation wind speed, air temperature, and relative humidity) on Penman potential evapotranspiration (PET) estimation. The study results show that variations in Penman PET rates during the summer rainy period at both watersheds appears to be controlled by air temperature adn net radiation. During the winter period at both watersheds, wariations in Penman PET rates appears to be controlled by relative humidity and air temperature.

  • PDF

Sensitivity analysis of factors affecting 2D calculation in inundation analysis by using XP-SWMM (XP-SWMM을 이용한 침수 분석 시 2차원 계산에 영향을 미치는 인자에 대한 민감도 분석)

  • Sun, Dongkyun;Kang, Taeuk;Lee, Sangho
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2021.06a
    • /
    • pp.339-339
    • /
    • 2021
  • XP-SWMM은 유역의 강우-유출과 1차원 관망 해석 및 2차원 지표면 흐름 해석이 가능하여 도시지역의 침수 모의에 활용도가 높다. 하지만 대부분의 수학적 모형이 그러하듯 XP-SWMM은 많은 입력 변수를 포함하고 있어 사용자의 숙련도에 따라 모의 결과가 달라질 수 있다. 본 연구의 목적은 XP-SWMM을 이용한 침수 모의의 정확도를 향상시키기 위해 침수 모의에 영향을 줄 수 있는 인자를 검토하고, 민감도 분석을 통해 인자별 적정 범위를 제안하는 것이다. 다만, 유역의 강우-유출과 1차원 관망 해석에 사용되는 매개변수는 과거 많은 연구자들이 적정 범위를 제시하였으므로 본 연구에서는 2차원 지표면 흐름 해석에 관한 입력 변수만을 대상으로 하였다. 이를 위해 2차원 계산의 지배방정식인 천수방정식의 매개변수 중 XP-SWMM에서 제어할 수 있는 인자와 XP-SWMM의 사용자 편의환경(graphical user interface; GUI)에서 제어 가능한 인자를 고려하였다. 선정된 인자는 지표면 조도계수, 2차원 계산 시간 간격, 2D 집수유량 계수, Smagorinsky 계수, Wet/dry 깊이이다. 제시된 인자들을 대상으로 침수흔적도의 침수 면적을 기준으로 민감도 분석을 수행하였고, 인자의 변화율을 침수 면적의 변화율로 변화시키는 조건수(condition number)를 활용하여 인자별 민감 여부를 분석하였다. 또한, 영향 인자 변화에 따른 침수 면적과 침수흔적도의 상대오차를 분석하여 영향 인자의 적정 범위를 제안하였다. 그 결과, 지표면 조도계수의 적정범위는 0.02~0.05, 2차원 계산 시간 간격은 0.1-3.5초, Smagorinsky 계수는 0.06~1.0, Wet/dry 깊이는 0.001~0.02 m인 것으로 나타났다. 본 연구는 XP-SWMM을 이용한 2차원 침수 모의에 활용될 수 있는 영향 인자와 적정 범위를 제안한 연구로서, 향후 XP-SWMM을 이용한 많은 침수분석에 참고자료로 활용될 수 있을 것으로 판단된다.

  • PDF

Accuracy Improvement of Urban Runoff Model Linked with Optimal Simulation (최적모의기법과 연계한 도시유출모형의 정확도 개선)

  • Ha, Chang-Young;Kim, Byunghyun;Son, Ah-Long;Han, Kun-Yeun
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.38 no.2
    • /
    • pp.215-226
    • /
    • 2018
  • The purpose of this study is to improve the accuracy of the urban runoff and drainage network analysis by using the observed water level in the drainage network. To do this, sensitivity analysis for major parameters of SWMM (Storm Water Management Model) was performed and parameters were calibrated. The sensitivity of the parameters was the order of the roughness of the conduit, the roughness of the impervious area, the width of the watershed, and the roughness of the pervious area. Six types of scenarios were set up according to the number and types of parameter considering four parameters with high sensitivity. These scenarios were applied to the Seocho-3/4/5, Yeoksam, and Nonhyun drainage basins, where the serious flood damage occurred due to the heavy rain on 21 July, 2013. Parameter optimization analysis based on PEST (Parameter ESTimation) model for each scenario was performed by comparing observed water level in the conduits. By analyzing the accuracy of each scenario, more improved simulation results could be obtained, that is, the maximum RMSE (Root Mean Square Error) could be reduced by 2.41cm and the maximum peak error by 13.7%. The results of this study will be helpful to analyze volume of the manhole surcharge and forecast the inundation area more accurately.