• KDI Journal of Economic Policy
• /
• v.19 no.2
• /
• pp.73-157
• /
• 1997

19세기(世紀) 중반(中盤)에 시작된 선진국(先進國)들의 공업화(工業化)는 약 100년이 소요(所要)되었는데 동(東)아시아 신흥공업국(新興工業國)(NICs)들의 경우에는 20~30년이 소요(所要)된 것으로 추정된다. 후자(後者)의 공업화(工業化) 경험은 흔히 '동(東)아시아의 기적(奇蹟)'이라 불린다. 그러나 이 고속성장(高速成長) 혹은 압축성장(壓縮成長)이 가능했던 이유가 무엇이냐에 관해 경제학계(經濟學界) 내외(內外)에서 그리고 국내외(國內外)에서 일치된 의견이 없고, 특히 이 과정에서의 정부(政府)의 역할(役割)을 어떻게 평가하느냐에 관하여는 더욱 그러하다. 신고전(新古典) 경제학(經濟學)은 이 나라들의 가격왜곡(價格歪曲)의 최소화(最小化), 시장기구(市場機構)의 활용(活用), 국제분업(國際分業)에의 참여(參與)에서 주된 이유를 찾고 있는데 비해, 소위 수정주의(修正主義)는 이같은 견해가 사실과 크게 괴리가 있으며 '기적(奇蹟)'은 시장(市場)의 자원배분(資源配分)에 대한 정부개입(政府介入)이 주효(奏效)하였기 때문이라 주장한다. '동(東)아시아의 기적(奇蹟)'은 동(東)아시아란 지역(地域)에서 일어난 현상일 뿐 아니라 20세기(世紀) 후반(後半)에 일어난 동시대적(同時代的) 현상이기도 하다. 공업화(工業化)를 이룬 나라들은 모두 세계시장(世界市場)과 활발히 교역(交易)하였다는 공통점이 있는데, 세계시장(世界市場)의 규모(規模)를 대표하는 세계총수출(世界總輸出)이 19세기(世紀) 중반(中盤)과 20세기(世紀) 후반(後半) 사이에 실질기준(實質基準)으로 100배 이상 커졌다. 이 글은 세계시장(世界市場)의 규모증대(規模增大)가 동(東)아시아 NICs들의 고속성장(高速成長)의 이유(理由)였을 가능성(可能性)을 이론적(理論的)으로, 실증적(實證的)으로 검토해본 것이다. 이론적(理論的)으로는, A Lewis의 무한노동공급(無限勞動供給)(unlimited supply of labor)이 존재하는 경제(經濟)에서는 세계시장((世界市場) 상대가격(相對價格)이 불변(不變)인 한 제조업내(製造業內) 노동집약도(勞動集約度)가 높은 산업(産業)에 대한 투자유인(投資誘因)이 지속된다는 점에 고속성장(高速成長)의 근거가 있다고 보았다. 이러한 투자(投資)의 지속은 제조업부문(製造業部門)의 산출(産出)과 고용(雇傭)이 경제(經濟)에서 점하는 비중(比重)을 낮은 자원비용(資源費用)으로 증대(增大)시킬 것이기 때문이다. 실증분석(實證分析)에서는, 필요한 통계자료(統計資料)가 있는 19개국의 공업화(工業化) 경험(經驗)을 검토하였는데, 한 나라가 공업화(工業化)를 시작하는 시점(時點)의 세계총수출(世界總輸出)이 클수록 그 나라의 공업화(工業化) 소요기간(所要期間)이 단축(短縮)된다는 매우 확실한 증거가 있었다. 또한 동(東)아시아 NICs의 공업화(工業化) 소요기간(所要期間)이 선진국(先進國) 경험에 비해 약 1/4의 길이로, 혹은 그보다 더 짧게 단축(短縮)된 것은 거의 모두 세계총수출(世界總輸出) 규모(規模)의 증가(增加)로 설명될 수 있었다. 이같은 이론적(理論的) 근거(根據)와 실증적(實證的) 증거(證據)를 감안할 때, 우리 경제(經濟)는 정부주도형(政府主導型)이었으나 고속성장(高速成長)을 가능하게 한 것은 정부주도(政府主導)보다는 그 규모(規模)가 대폭 증대한 세계시장(世界市場)에서의 국제분업(國際分業)이었다.

• The Journal of Engineering Geology
• /
• v.14 no.1
• /
• pp.61-69
• /
• 2004

Building stones are used mainly as a material for making decoration and sculpture, and consequently they must have predominant physical properties extensively. Among various physical properties, the coefficient of pore dominates the usefulness of building stones, so the plans were made for establishing the quality classification of building stones with respect to the nature of pore. For this study, bore-hole core samples according to the depth of the biotite granites and the granitic gneiss were applicated. From the related chart between porosity and absorption ratio, Mungyeong granitic gneiss($Gn_1$) shows the widest phase of distribution in the range of measurement values, and the values decrease in the order of Pocheon granite($Gr_2$) and Mungyeong granite($Gr_1$) in the range. The strength of each rock mass varies with the degree of alteration. Also in correlation between compressive strength and tensile strength, the range of measurement values decrease in the order of $Gn_1$, $Gr_2$and $Gr_1$. Porosity is adopted as a representative physical property for establishing the quality classification of building stones, and then relative evaluation was made with regard to various physical properties. From the related chart between porosity(n)-specific gravity(G), absorption ratio(Ab), compressive strength(${\sigma}_{c}$), tensile strength(${\sigma}_{t}$), shore hardness(Hs) and Young's modulus($E_{t}$), standard of each grade is established.

• Journal of Korea Port Economic Association
• /
• v.25 no.3
• /
• pp.183-206
• /
• 2009

The purpose of this study is to suggest the new strategies for strengthening the competi tiveness of Incheon port. To measure the calling factors and satisfaction of ports, this study developed a list of 24 items using a seven-point Likert scale through the previous literature reviews, pilot test and emerging factors. Factor analysis, regression analysis, one sample T-test, IPA and SPSS were conducted to verify the determinants choosing ports and customer satisfaction. The result of an empirical study revealed that the cargo volume and information system, etc. in Incheon port was evaluated as satisfied factors and berth availability and port charge, etc. as dissatisfied factors. Based on the outcomes of this study, to strengthen the competitiveness of Incheon port, several strategies were advised such as the inducement of North American and European cargo, port infrastructure, dedicated terminal and GTO inducement, hinterland construction, logistics companies inducement and cooperation with neighboring ports.

• Journal of Climate Change Research
• /
• v.4 no.3
• /
• pp.221-233
• /
• 2013

Due to the fact that the speed of climate change in Republic of Korea exceeds the global average speed, sound conservation and tourism strategies should be prepared based on the comparison between the meteorological factors and the number of tourists. In this context, almost 70 percent of the industries in Ulleung-do are closely related to tourism; hence the significance of tourism is increasing. The annual precipitation variation does not show remarkable fluctuation, and most precipitation has a tendency to fall in summer and autumn However, for the years 2010 and 2011, a different trend was exhibited with higher winter precipitation than any other periods. Precipitation intensity is usually stronger in May (in the morning), June (in the afternoon), and no big difference is shown between morning and afternoon precipitation from July to September. The number of tourist is compared to both the precipitation at Ulleung-do and the number of advisories and warnings in the East Sea of Korea using correlation analysis. The results demonstrate that the meteorological factors that reduce the number of tourist are precipitation and the number of advisories and warnings.

• Journal of Popular Narrative
• /
• v.26 no.3
• /
• pp.255-288
• /
• 2020

The purpose of this study is to propose 'plot lamination methodology' for planning and analyzing of storytelling. The story contents with a certain volume of narrative might have several important characters. Most of the characters have meaningful influences on the context of the story through their choices and actions as they go through dynamic changes to construct and deconstruct relationships. The plot lamination methodology is the result of an attempt to look at the process from the 'strategic' point of view by focusing on the fact that the main characters with supplementary nature contribute to the independent formation of subplot based on the main plot driven by the protagonist. Regardless of how they live their own unique and autonomous life in the narrative, the main characters hold a relatively subordinate position within the centripetal force of the main plot. Their journeys tend to expand/emphasize/divide up the process of the main plot's 'persuasion via causality,' and also individualize into the functions of emotional sympathy (pathos), moral, ethical perspective (ethos), and rational logic (logos). As such, the subplots of main characters are laminated according to these three functional traits, which could become multi-layered through second or third laminations, depending on the number and roles of other characters. If the plot lamination methodology is further developed through follow-up studies, it will open up the possibilities of the strategic design (planning) and aesthetic criticism (analysis) regarding the procedure of conjugation /branching of subplot and/from the main plot.

• Korea Trade Review
• /
• v.42 no.2
• /
• pp.205-225
• /
• 2017

The study attempts to verify the case related to the notice of payment refusal by issuing bank regarding discrepancy in transport document under L/C(Letter of Credit) transaction. Considering the high portion of trade between Korea and China, Korean companies and banks in L/C transaction should be careful about many unpredictable situations. The case of this study is that Chinese seller(beneficiary) initiated a civil suit against Industrial Bank of Korea to Chinese court and Chinese courts in the first and second trials judged that the notice of payment refusal by Industrial bank of Korea doesn't satisfy Article 16, (c) (ii) (iii) in UCP 600. However, Industrial Bank of Korea implements the judgement even though the judgement is highly biased to Chinese seller. Considering the judgement by Chinese courts, the study suggests some countermeasures to Korean companies and banks which opened L/C. First, the issuing bank should describe the contents of discrepancy specifically based on Article 16, (c) in UCP 600. Second, it is necessary to insert a clause regarding governing law in the L/C contract like sales contract. Third, considering the biased judgement by Chinese court and difficulty in execution of foreign judgement in China, it is recommended to using arbitration as a method of dispute resolution such as ICLOCA and DOCDEX Rules which are international system operated by international instruments because it has legal effects to parties in L/C contracts if the issuing bank inserts arbitration clause in L/C.

• Economic and Environmental Geology
• /
• v.47 no.4
• /
• pp.441-453
• /
• 2014

Thermal and physical properties were measured on 206 Jurassic granite samples obtained from three boreholes in the central part of Korea. Thermal conductivity(${\lambda}$), thermal diffusivity(${\alpha}$), and specific heat(Cp) were measured in a laboratory; the average values are ${\lambda}$=2.813 W/mK, ${\alpha}=1.296mm^2/sec$, and Cp=0.816 J/gK, respectively. In addition, porosity(${\phi}$), and dry and saturated density(${\rho}$) were measured in the laboratory; the average values are ${\phi}$=0.01, ${\rho}(dry)=2.662g/cm^3$ and ${\rho}(saturated)=2.67g/cm^3$, respectively. Thermal diffusivity of 10 granite samples were measured with increasing temperature from $25^{\circ}C$ to $200^{\circ}C$. In this study, we found that thermal diffusivity at $200^{\circ}C$ is about 30% lower than thermal diffusivity at $25^{\circ}C$. In correlation analysis, thermal conductivity increases with increasing thermal diffusivity. However, thermal conductivity does not show good correlation with porosity and density. Consequently, we know that thermal conductivity of granite would be more influenced by mineral composition than by porosity. We also derived ${\rho}=-2.393{\times}{\phi}+2.705$ from density and porosity data. XRD and XRF analysis were performed to investigate effects of mineral and chemical composition on thermal conductivity. From those results, we found that thermal conductivity increases with increasing quartz and $SiO_2$, and decreases with increasing albite and $Al_2O_3$. Regression analysis using those mineral and chemical composition were carried out ; we found $K=0.0294V_{Quartz}+1.93$ for quartz, $K=0.237W_{SiO_2}-14.09$ for $SiO_2$, and $K=0.053W_{SiO_2}-0.476W_{Al_2O_3}+6.52$ for $SiO_2$ and $Al_2O_3$. Specific gravities were measured on 10 granite samples in the laboratory. The measured specific gravity depends on chemical compositions of granite. Therefore, specific gravity can be estimated by the felsic-mafic index(F) that is calculated from chemical composition. The estimated specific gravity ranges from 2.643 to 2.658. The average relative error between measured and estimated specific gravities is 0.677%.

• Korean Security Journal
• /
• no.60
• /
• pp.33-61
• /
• 2019

It is quite difficult to actually prove the effectiveness of so-called target-hardening, one of the various strategies used to reduce crime, one of the serious problems in society recently. In particular, three to five minutes is often used as golden time for intruders to give up or stop, which is based on foreign and some indirect research cases in Korea, but there were no studies that more directly identified the average break-in operation time or the abandonment time based on the elapsed time when the shield hardware resists intruders. This study was the first of its kind in Korea to investigate and verify samples of 90 inmates of break-in burglars who were imprisoned in August 2018 by profiling the average criminal experience, education level, age, height and weight of typical Korean professional break-in thieves, and specific criminal methods, average break-in operation time, and the criteria for giving up if not breached. According to the analysis results, in the survey on the number of pre-invasion theft crimes by intruders, many of the respondents who participated in the survey were criminals of professional invasions, and by their physical characteristics, there was not much difference from ordinary adult men. Residential facilities were the highest in the world, followed by commercial and educational facilities. According to the survey on the types of facilities that committed intrusion into residential facilities, it was not safe to say that single-family housing accounted for the largest portion of single-family housing, multi-family housing, apartment high-rise (more than three stories), and apartment low-rise (more than one to three stories) among residential facilities, and that the ratio of apartment high-rise was higher than expected. Based on the average time required to break into a place for an intrusion crime, it is assumed that the psychological time worked in a place where the break-in was difficult, since the break-in was not performed while measuring the time of the break-in operation. In the case of time to give up a crime, more than half of the respondents said they would give up the crime even in less than four minutes, suggesting that a significant number of intrusive crimes can be prevented even if the facility has four minutes of intrusion resistance. This proves that most intruders will give up the break-in if the break-in resistance performance of the security facility is exercised for more than five minutes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.26-32
• /
• 2017

Enlargement and speed-up of a ship and diversification of ship's type have served to greatly increase the importance of marine transport means. It's reported that accident occurrence frequency of collision is high next to engine damage among the ship accident types, and that the accident ratio according to human factors is also high. In addition, ship accidents come to occur caused by complex cause factors rather than a sole cause factor, it is necessary to investigate the cause factors through the written verdict. This study proposed the cause factors of collision ship accident on the basis of human factors in collision ship accident among the written verdicts provided by the Korean Maritime Safety Tribunal, and inquired into the cause factor and effect through the correlation analysis of accident occurrence factors. Also, this study predicted the collision accident through analyzed the major cause factor of the occurrence at the zero minute when collision on the basis of the time taken from the time point of detecting collision of ships to the time point of collision occurrence. This study used commercial software-Statistical Package for Social Sciences (SPSS Ver21.0) to do correlation analysis. For time analysis, this study analyzed the cause factor and time by analyzing the time taken from the time point of detected ships to the time point of collision occurrence on the basis of the written verdicts. The study analysis showed that there were many cases of collision ship accidents occurrence caused by more than two sorts of cause factors, and that the case (zero minute) where there is no time to spare for collision avoidance accounted for 36.1 %, and negligence in guard or surveillance of the other ship, and sailing while drowsy, or drinking was a contributor to an accident. Poor watch keeping is very strong relationship with pool ready for sail.

• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.720-725
• /
• 2013

When highly shrinkable materials such as coir dust are major component of root media, the degrees of compaction during container filling of root media severely influences the physical properties of root media. It results in the changes in total porosity (TP), container capacity (CC) and air-filled porosity (AFP). This research was conducted to secure the fundamental information in changes of soil physical properties as influenced by the compaction of root media during container filling. To achieve this, three root media were formulated by blending coir dust (CD) with expanded rice hull (CD + ERH, 8:2, v/v), carbonized rice hull (CD + CRH, 6:4) and ground and raw pine bark (CD + GRPB, 8:2). Based on the optimum bulk density, the amount of root media filled into 6.0, 7.5, 8.5, 10.5 and 12.5 cm were adjusted to 90, 100, 110, 120 and 130% based on the weight of root media. Then the changes in TP, CC, and AFP were measured. Elevation of the packing amount of root media in all sizes of pot resulted in the decrease of TP. But the decrease was more severe in CD + ERH and CD + CRH than those in CD + GRPB. The CC also decreased gradually as the packing amounts were elevated in three root media, but the decreases were severe as the container sizes became larger. The AFP decreased drastically by the elevation of the packing amount of root media in all sizes of pot. The AFP was the highest in CD + CRH medium when pot sizes were smaller than 7 cm, but that was the highest in CD + ERH when the pot sizes were larger than 8.5 cm among the 3 root media tested. In this research, the elevation of packing amount of three root media influenced more severely the AFP rather than CC. This result indicates that the packing amount should be controlled to maintain appropriate level of AFP because AFP rather than CC influence severely crop growth. The results obtained through this study can be used to predict the changes in physical properties of root media as influenced by packing amount in various sizes of pots.