• Journal of fish pathology
• /
• v.9 no.2
• /
• pp.119-126
• /
• 1996

We report on the variation of infection and histopathological change of Microcotyle sebastisci parasitic on cultured rockfish, Sebastes schlegeli, in Namhae Islands and Kamak Bay from April to October in 1995. Microcotylosis due to Microcotyle sebastisci occurred among cultured rockfish, Sebastes schlegeli. This parasite was not found on the host fish from June to July. Parasite sites were mainly consist of 2nd and 3rd gill arch`s filaments of rockfish. Also, the sites were secreted in large quantity of mucus with a very small bleeding. In Namhae Islands, maximum values of prevalence, relative density and mean intensity were found on September 1995, as 40.0%, 30.7 and 76.8, respectively. In Kamak Bay, maximum values of prevalence, relative density and mean intensity were obtained on October 1995, as 46.0%, 40.5 and 88.0, respectively. Histopathological changes of the heavily infested gills were showed necrosis, epithelium of the gill filaments underwent hyperplasia with fusion of the lamella and filamental clubbing. And a bacterial colony is invaded on the surface of lamella epithelium.

• Korean Journal of Environment and Ecology
• /
• v.3 no.1
• /
• pp.42-50
• /
• 1989

A valley and a ridge forest in Mt. Gaya area was studied to investigate forest structure in relation to altitude and part of slope. Sixty-three quadrats were set up in the valley forest along altitude of 600m to 1,000m and part of slope, and thirty-eight quadrats were set up in the ridge forest along altitude of 700m to 1,430m. According to the importance values, the valley forest was Quercus mongolica-Lespedeza maximowiczii community and the ridge forest was Pinus densiflora, Quercus mongolica-Rhododendron mucronulatum community. Similarity index between the valley forest community and the ridge forest community was 37.2%. Shannon's species diversities of the valley forest community and the ridge forest community were 1.3402 and 1.0098, respectively. According to importance values by crown stories and DCA ordination, successional trends of tree species may be from Pinus densiflora and Pinus koraiensis through Quercus mongolica to Quercus serrata and Carpinus laxiflora. As going from the lower part to upper part of the slope in the valley forest, the importance values of Quercus mongolica, Quercus aliena, Rhododendron mucronulatum and Lespedeza maximowiczii increased while those of Carpinus laxiflora and Fraxinus rhynchophylla decreased. With increasing elevation in the valley and ridge forest, the importance value of Pinus densiflora decreased while that of Quercus mongolica increased. In the valley forest, densities of canopy and shrubstratum increased as increasing elevation, and the number of species and species diversity decreased as increasing elevation and going from the lower part to the upper of slope. The range of similarity indices between parts of the slope, and the elevation belts of 100m in the valley forest were 66.6-69.2 and 25.9-79.8%, respectively. In the ridge forest, density and basal area of canopy tended to decreased as increasing elevation, and the range of similarity indices between elevation belts of 100m was 27.9-98.2%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.12
• /
• pp.2251-2257
• /
• 2006

We fabricated ZnO thin film successfully by using RF magnetron sputtering and investigated its potential for being utilized as the key material of piezoelectric device with the characterization of ZnO thin film such as such as crystallinity, surface morphology, c-axis orientation, film density. In thin study, $Ar/O_2$ gas ratio is fixed 70/30, RF power 125W, working pressure 8mTorr, distance between substrate and target 70mm, but the substrate temperature is varied from room temperature to $400^{\circ}C$. The relative intensity ($I_{(002)}/I_{(100)}$) or (002) peak in ZnO thin film deposited at $300^{\circ}$ was exhibited as 94%, then its FWHM was $0.571^{\circ}C$. Also, from the surface morphology evaluated by SEM and AFM, the film deposited at $300^{\circ}C$ showed uniform particle shape and excellent surface roughness of 4.08 m. The tendency of ZnO thin film density was exhibited to be denser with increasing substrate temperature but slightly decreased at near $400^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.183-188
• /
• 2011

The electronic structure and properties of Ni$(C_6H_{4-n}F_n)(CO)_2$ ($C_6H_4$=benzyne, n=1-4) complexes have been investigated using hybrid density functional B3LYP theory. Both aromatic natures and nucleus independent chemical shift (NICS) of the benzyne rings have been analyzed. Among mono-, di-, and tri-fluorinated complexes, 3-F, 3,6-F, and 4-H are the most stable isomers, respectively. NICS values calculated at the several points above the ring centers are consistent with those based on the relative energies of the complexes. The atoms in molecules (AIM) analysis indicates that Ni-C bond distance is well correlated with the electron density of a ring critical point (${\rho}_{rcp}$) in all species.

• Journal of the Korean Society for Railway
• /
• v.18 no.6
• /
• pp.567-577
• /
• 2015

This paper presents an assessment method of the ground vibration level with a combination of measured data and an analytic method. The basic concept of the method is similar to that in FRA(Federal Railway Administration) manual for detailed vibration analyses. However, going into detail, the assessment method was modified for a feasible evaluation of the vibration reduction effects of diverse types of wave barriers. The force density was evaluated in a vehicle-track interaction analysis and the transfer mobility of vibration was analyzed through a 2-D ground vibration analysis. The calculated 2-D transfer mobility was corrected to incorporate transfer characteristics of actual ground vibration by comparing the previously measured data and analysis results. Nine types of vibration reduction effects of wave barriers were analyzed on a shallow tunnel section of an urban railway where numerous civil complaints had actually been filed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2481-2486
• /
• 2013

It requires a lot of time and effort for general users who do not have enough understanding of GPS to properly processing GPS data. However, the GPS data processing field heavily relies on foreign-produced software and there is almost no development of user-oriented technology. Therefore, in this study, it was attempted to build an expert service that enables non-experts to use high-precision GPS data processing. As a result, an expert service that can maximize user convenience simply by entering the minimum required information for GPS data processing was developed, and the expert service was verified by relative positioning processing of the observation data of satellite control point provided by National Geographic Information Institute and observation data obtained by GPS survey. The expert service significantly reduces the effort and time for processing GPS data, which will contribute to precise positioning and other various studies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.639-643
• /
• 2004

[ $Ta_2O_5$ ]가 첨가된 $Ba(Zn_{1/3}Ta_{2/3})O_3$[BZT] 세라믹은 1:2 규칙화 정도가 증가하고 $Ba_3Ta_5O_{15}의 이차상이 새롭게 형성된다. $1580^{\circ}C$ 보다 높은 온도에서 소결된 BZT 세라믹은 $Ta_2O_5$를 첨가하면 입자의 성장이 일어나고 액상이 형성된다. 품질계수(Q) 값은 $1580^{\circ}C$ 보다 높은 온도에서 소결할 경우 미량의 $Ta_2O_5$ 첨가만으로도 상당히 증가한다. 상대밀도는 $Ta_2O_5$ 첨가량에 따라 감소하기 때문에 Q값의 증가는 상대밀도와는 무관하다. 반면에, $Ta_2O_5$의 첨가량에 따라 입자의 성장은 증가하였기 때문에 Q값의 향상은 입자크기와 관계가 있음을 알 수 있다. 많은 양의 $Ta_2O_5$ 첨가시 비록 입자 크기가 증가했음에도 불구하고 Q값이 매우 낮은 것을 볼 때, Q값의 감소는 $Ba_3Ta_5O_{15}$ 상의 영향과 낮은 밀도 값에 기인한 것이다.

• Journal of the Korean Chemical Society
• /
• v.54 no.4
• /
• pp.387-394
• /
• 2010

The theoretical calculations for $B_nH_n$, $B_nH_{n+1}$, $B_nH_{n+2}$ (n = 3-6) have been considered at the B3LYP level of theory with the 6-311G$^*$ basis set. The optimized geometries, harmonic vibrational frequencies, and binding energies are evaluated to elucidate the thermodynamic stability and spectroscopic properties. The harmonic vibrational frequencies for the molecules considered in this study show all real numbers implying true minima and the binding energies are corrected using zero-point vibrational energies (ZPVE). The binding energies and average energies due to increasing of BH monomer are predicted.

• Korean journal of applied entomology
• /
• v.25 no.1 s.66
• /
• pp.41-46
• /
• 1986

Exogenous factor and nutrients affecting for conidial germination of Colletetrichum dematium f. sp. capsicum causing red pepper anthracnose were studied by slide germination test. Optimum temperature of conidial germination was at $28^{\circ}C$, ranging 15 to $35^{\circ}C$. Optimum pH was at 5.5, ranging 4.5 to 8.0, and more than 90% of relative humidity (RH) was optimum. Poor conidial germination of the fungus was observed on sterile distilled water, but potato sucrose broth (PSB), red pepper fruit broth (RPFB), green pepper fruit broth (GPFB) and pepper leaf broth (PLB) furnished a satisfactory nutrients for conidial germination. Exogenous supply of carbon and nitrogen sources were essential for conidial germination, while potassium, phosphorous and sulfur were not evident as that for carbon and nitrogen. Soluble starch was the most suitable as a carbon source for conidial germination and followed by D-glucose, D-galactose and lactose in that order. Maximum germination was attained in the $1{\times}10^4$ conidia per ml. Germination was decreased with increment of conidial concentration, and in the density of $5{\times}10^4$ conida per ml, germination was nearly supipressed. It suggested existing a self-inhibitor. Non-washed conidia germinated more than washed conidia, and conidial germination was also gradually decreased by increasing conidial density.

• Journal of Korean Society of Forest Science
• /
• v.112 no.2
• /
• pp.127-135
• /
• 2023

This study aimed to develop biomass allometric equations and estimate carbon emission factors, such as the wood density, biomass-expansion factor, and root-to-shoot ratio, for Platanus occidentalis and Metasequoia glyptostroboides planted in urban areas. Twenty M. glyptostroboides and 25 P. occidentalis trees were harvested, and the dry weights and stem volumes of stems, branches, leaves, and roots (>5 mm) were measured. The wood densities of M. glyptostroboides and P. occidentalis were 0.293 ± 0.008 g cm^-3 and 0.509 ± 0.018 g cm^-3, and the biomass-expansion factors were 1.738 ± 0.031 and 1.561 ± 0.035. The root-to-shoot ratios were 0.446 ± 0.009 and 0.402 ± 0.012. The uncertainty tests (coefficient of variation, %) gave 2.8% and 3.5% values for wood density, 1.8% and 2.3% for biomass-expansion factor, and 2.1% and 2.9% for root-to-shoot ratio, respectively. Among the developed allometric equations, Model I using the diameter at breast height (DBH) was suitable. The allometric equations of M. glyptostroboides and P. occidentalis above ground were y = 1.679 (DBH)^1.315 and y = 0.505 (DBH)^1.896, and the allometric equations of the root and total were y = 0.746 (DBH)^1.315, y = 0.301 (DBH)^1.751, y = 2.422 (DBH)^1.316, and y = 0.787 (DBH)^1.858. If the carbon-emission factors of this study and biomass allometric equations of the three developed models are used to estimate the carbon storage and biomass of urban forests, errors caused by not considering the use of fixed factors and the environmental differences can be reduced.