• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.4
• /
• pp.190-211
• /
• 2022

This study investigated the effect of the shape and height of road signs on detection performance when detecting road signs with LiDAR, which is recognized as an essential sensor for autonomous vehicles. For the study, four types of road signs with the same area and material and different shapes were produced, and a road driving test was performed by installing a 32Ch rotating LiDAR on the upper part of the vehicle. As a result of comparing the shape of the point cloud and the NPC according to the shape of the road sign, It is expected that a distance of less than 40m is required to recognize the overall shape of a road sign using 32Ch LiDAR, and shapes such as triangles and rectangles are more advantageous than squares in securing the maximum point cloud from a long distance. As a result of the study according to the height of the road sign, At short distances (within 20m), if the height of the sign is raised to more than 2m, it deviates from the vertical viewing angle of the LiDAR and cannot express the complete point cloud shape. However, it showed a negligible effect compared to the near-field height change. These research results are expected to be utilized in the development of road facilities dedicated to LiDAR for the commercialization of autonomous cooperative driving technology.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.11
• /
• pp.61-69
• /
• 2021

In this study, scale down model bridge piers were fabricated and non-destructive experiments conducted with an impact load to determine scours in the ground adjacent to the bridge piers using the natural frequency of the bridge piers. Three scale-model bridge piers with different heights were fabricated, and they penetrated the ground at a depth of 0.35 m. The scours around the bridge piers were simulated as a side scour and foundation scour. The experiments were conducted in 13 steps, in which scouring around the model bridge piers was performed in 0.05 m excavation units. To derive the natural frequency, the impact load was measured with three accelerometers attached to the model bridge piers. The impact load was applied with an impact hammer, and the top of the model bridge pier was struck perpendicularly to the bridge axis. The natural frequency according to the scour progress was calculated with a fast Fourier transform. The results demonstrated that the natural frequency of each bridge pier tended to decrease with scour progress. The natural frequency also decreased with increasing pier height. With scour progress, a side scour occurred at 70% or higher of the initial natural frequency, and a foundation scour occurred at less than 70%.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.29 no.4
• /
• pp.33-40
• /
• 2021

In this study, the physico-chemical and biological characteristics of anaerobic granular sludge at different heights of a full-scale UASB reactor (UASBr) were investigated. Granular sludge was taken from 1 m, 2 m, and 3 m above the ground level in the UASBr. The morphological analysis showed that the upper part had bigger granules and the lower part had rounder granules. The ANOVA test confirmed that the mean size and the roundness of the granules had statistically significant difference along the height at 95% confidence level, and there was a significant negative linear relationship between the size and roundness (r=-0.40, p<0.05). A SMA test using acetic, propionic and butyric acids showed that granules from 2 m height had the highest specific methanogenic activity. The EPS contents were also unequal to each height, with 2 m showing the highest content. These findings could be helpful to understand the different characteristics of stratified anaerobic granules in full-scale UASBr and maintain the reactor performance.

• Journal of Convergence for Information Technology
• /
• v.12 no.5
• /
• pp.194-201
• /
• 2022

This study purpose was to know the effects 30 aged females forehead ms by SUKI intervention(4weeks). Total tested group were 18 persons, It used for SUKI intervention of SUKI process C1, SUKI process C2, SUKI process C3, SUKI process C4 were adopted three times a week in 4 weeks. The research conclusion like this. EG was a significant difference in forehead ms. Therefore, to maintaining elasticity on forehead ms. showed as some research of SUKI intervention effects for the forehead ms(p<.05). In this study, even though limited, it was judged that wrinkles due to a decrease in elasticity of the forehead ms located on the upper surface of a woman's face in her 30s could have a profound effect on women's external appearance, so SUKI intervention was applied. In addition, the role of the elastic on the forehead ms was to suggest an alternative semester method that can effectively control the management of external appearance by managing which it suitable for the life cycle of women in their 30s. In conclusion, we hope that in the future, various experiments will be used as new research data on how to prevent females facial skin beauty and wrinkles and help improve elasticity of facial ms around the face.

• Knowledge Management Research
• /
• v.23 no.2
• /
• pp.211-228
• /
• 2022

As social media marketing becomes prevalent, it is necessary to understand the administrative role of managers in promoting user engagement. However, little is known about how community managers enhance user engagement in social media. In this research, we study how managers can boost online user participation, including clicking likes and writing comments. Using the SUR (Seemingly Unrelated Regression) model, we find out that the active participation of managers increases user engagement of both passive (likes) and active (comments) ones. In addition, we find that the number of emotional words included in posts has a positive effect on the passive engagement whereas it negatively affects the active engagement. Lastly, the congruency between posts and comments positively affects users' passive engagement. This study contributes to prior literature related to online community management and text analyses. Furthermore, our findings offer managerial insights for practitioners and social media managers to further facilitate user engagement.

• Journal of the Korean Geotechnical Society
• /
• v.39 no.2
• /
• pp.19-30
• /
• 2023

Underground structures, such as compacted sand piles applied as soft ground countermeasures, are analyzed for settlement and stability by the composite ground design method. The basic principle of the composite ground design method is the arching effect. The reinforcing effect of the pile is evaluated as the stress-distribution ratio. When applying grouting piles with elastic properties using the ground reinforcement method, the existing stress-distribution ratio was only considered when the pile was installed. This study shows that the method of applying the stress-distribution ratio applied in previous studies should be changed when the ground reinforcement pile is installed at an arbitrary location in the ground without raising it to the ground surface. When high strength jet routing is applied, the stress-distribution ratio (n) to the in-situ ground generally ranges from 30 to 50. However, if the pile is located far from the surface and the depth goes down to the boundary depth of the stress sphere, the stress-distribution effect rapidly decreases, and the stress-distribution ratio converges to 1.5.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.241-249
• /
• 2022

This paper discusses the design of a ground clutter prevention fence for a radar wind profiler (RWP). The design point of the clutter fence is to improve the quality of the received signal by removing the non-weather clutter coming from the side. In this paper, a clutter prevention fence composed of a metallash mesh around the RWP is proposed, and the phase center of the antenna, the length, and height of the down fence, and the height and slop of the top fence through M&S are designed. The designed ground clutter prevention fence and 256 active phase array antennas were used as basic data. The effectiveness of the design was confirmed by a simulation. The side lobe in the ±90° direction was reduced by more than 30dB depending on the presence or absence of the designed ground clutter prevention fence. The fence was manufactured by 3D modeling, and the clutter shielding performance of approximately 20dB or more on the side of the antenna (±90°) was confirmed by applying it to the currently operated RWP.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.468-468
• /
• 2023

최근 급격한 기후변화에 의한 이상가뭄 발생 등을 대비하기 위한 비상용수 또는 대체 수자원으로서의 지하수 개발수요가 증가함에 따라 기저유량 확보 및 수질개선 방안을 수립하는 것은 지속가능한 수자원 이용 관리 측면에 있어서 매우 중요하다. 국내 지하수 사용에 따른 하천유량의 변동에 관한 연구는 활발히 진행되었으나, 실질적으로 적용가능한 지하수 저감 방안 및 지하 수질개선방안에 대한 연구는 미비한 실정이다. 이에 본 연구에서는 바이오차를 이용하여 시험포를 설계 및 시공하였으며, 실내 인공강우 실험을 통해 지하 침투수 확보 능력 및 수질개선 효과를 평가하였다. 대조구는 폭 1 m × 길이 1 m × 깊이 0.60 m로 시공하였으며, 바이오차 시험포는 폭 1 m × 길이 1 m, 시험포 상단과 하단 각 0.10 m씩 대조구와 동일한 흙으로 채웠으며, 그 사이 0.40 m만큼은 바이오차를 채워서 시공하였다. 시험의 정밀도를 높이기 위해 동일한 조건으로 대조구와 바이오차 시험포 각 2개씩, 총 4개의 시험포를 시공하여 실내 인공강우 실험을 진행하였으며, 시험포에서 발생한 직접유출수와 기저유출수를 이용하여 바이오차의 지하 침투량 확보 및 수질개선효과를 분석하였다. 시험포 완공 후 총 2번의 실내인공강우 실험 결과 대조구에서 발생한 직접유출량은 총 0.214 m³, 바이오차 시험포에서는 총 0.194 m³로 대조구 대비 총 직접유출량 저감효과는 9.4%로 나타났다. 기저유출의 경우 바이오차 시험포(0.036 m³)에서 대조구(0.003 m³) 대비 약13배 많은 양의 기저유출수가 발생한 것으로 나타났다. 각 시험포에서 발생한 유출수의 오염부하를 산정해 대조구 시험포 대비 바이오차 시험포에서 발생한 직접유출수의 오염부하 저감효과를 분석한 결과 BOD₅ 항목과 COD_Mn 항목, 그리고 TOC 항목의 경우 26.3%과 22.0%, 그리고 27.6%로 저감 된 것으로 나타났으나, SS 항목과 T-N 항목, 그리고 T-P 항목의 경우 저감효과가 없는 것으로 나타났다. 이와 같이 바이오차는 지하 침투수 확보 능력은 효과적인 것으로 나타났으나, 직접유출수의 수질개선 효과는 미비한 것으로 나타났다. 그러나 바이오차의 지하 침투량 및 수질개선 효과는 바이오차 생산 시 사용된 열분해 방식, 사용된 바이오차의 양 등에 따라 편차가 클것으로 판단되며, 바이오차의 생산 방법, 토양 흡착 기간, 바이오차의 양 등 다양한 조건에서의 모니터링을 통해 정량화 되어야 할 것으로 판단된다.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.5
• /
• pp.412-421
• /
• 2023

Ultrasound brain stimulation is spot-lighted by its capability of inducing brain cell activation in a localized deep brain region and ultimately treating impaired brain function while the efficiency and directivity of neural modulation are highly dependent on types of stimulus waveforms. Therefore, to optimize the types of stimulation parameters, we propose a cell-cultivable ultrasonic transducer having a series stack of a spin-coated polymer piezoelectric element (Poly-vinylidene fluoride-trifluorethylene, PVDF-TrFE) and a parylene insulating layer enhancing output acoustic pressure on a glass-coverslip which is commonly used in culturing cells. Due to the uniformity and high accuracy of stimulus waveform, tens of neuronal cell responses located on the transducer surface can be recorded simultaneously with fluorescence microscopy. By averaging the cell response traces from tens of cells, small changes to the low intensity ultrasound stimulations can be identified. In addition, the reduction of stimulus distortions made by standing wave generated from reflections between the transducers and other strong reflectors can be achieved by placing acoustic absorbers. Through the proposed ultrasound transducer, we could successfully observe the calcium responses induced by low-intensity ultrasound stimulation of 6 MHz, 0.2 MPa in astrocytes cultured on the transducer surface.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.9 no.1
• /
• pp.121-132
• /
• 2007

1. 버섯종균 개선 버섯의 품질과 수량을 좌우하는 주요 요인은 종균의 활력이다. 그러나 라오스에서는 종균의 활력이 낮아 조그마한 100cc 병에 배양완성하는데 14일이 소요되는 등 볍씨종균의 균사생장과 균사밀도가 매우 낮음을 확인하였다. 따라서 100cc 병을 1000cc 비닐봉지로 개선하여 입봉하는데 소요되는 시간을 10배로 단축 개선하였다. 또한 곡립종균을 액체종균으로 대처한 결과 균사생장속도가 2배가 빨랐으며 작업속도가 4배가 빨라졌다. 2. 버섯배지제조 방법 개선 미세하고 건조한 톱밥에 수분을 첨가하는데 50%이하의 수분함량을 유지함으로서 균사가 표면에만 자라고 있는 것을 확인하고 버섯 배지제조 시 물리성을 개선하기 위하여 볏짚을 잘게 잘라 10%~100%까지 혼합하는 실험을 실시하였다. 그 결과 톱밥 50%에 볏짚 50% 혼합하는 것이 균사생장 속도와 밀도가 좋았다. 또한 왕겨도 30%정도 혼합한 배지처리에서 가장 좋았다. 또한 수분함량도 65%로 향상하여 혼합하도록 지도하였다. 3. 버섯배지살균 방법 개선 라오스에서는 왕겨를 태워 살균을 실시하고 있다. 화력이 약하여 살균한 배지에서 볍씨의 새싹이 돋아나오는 경우를 발견하였다. 이는 살균이 제대로 되지 않았음을 의미한다. 그래서 이동식 직화식 살균을 권하였으나 시설자재값이 감당이 안되어 엄두를 내지 못하였다. 따라서 가스버너를 도입하여 단시간에 화력을 높여 살균을 실시하므로서 세균의 증식을 막아 균사생장속도를 빠르게 하고 균사량의 축적을 높이는데 교육을 하고 컨설팅을 실시하여 개선하였다. 4. 병뚜껑과 형성틀을 대체한 링을 이용한 입봉작업시간 단축과 비용절감 버섯봉지에 배지를 담는 입봉작업을 할 때 병뚜껑과 그의 형성틀을 끼우고 솜을 조금 뜯어 톱밥배지 위에 놓는 작업을 한다. 이는 아주 잘못된 방법이다. 왜 그렇게 하는가하는 것은 이해가 간다. 그렇게 하는 이유는 접종할 때 실내에서 그냥 접종하므로 뚜껑을 열때 보호막 역할을 할 것으로 생각하고 그렇게 하는데 천만의 말이다. 어떻든 뚜껑을 열면 잡균이 들어가는 것은 마찬가지이다. 그래서 이 솜을 배지표면에 놓으면 마른 솜이 그렇지 않아도 수분이 적은데 이 솜이 수분을 또 빼앗아 가버린다. 그래서 균사생장이 늘려 15일이면 다 자라야할 균사배양기간이 한달씩 걸려도 표면만 살짝 잘린 결과가 빗어진다. 이렇게 표면만 균사가 사탕 발림식으로 자라면 품질이 저하되고 수량이 적고 병해충에 저항력이 약해지게 된다. 따라서 뚜껑과 형성틀, 솜을 모두 없애고 봉지 상단부위를 U자형으로 꺽어서 링을 끼우는 방법을 실제로 실험으로 보여준 결과 작업능률이 5배로 빠르고 작업공정이 빨라짐으로서 세균번식밀도가 적어 균사생장 속도가 2배로 빨라졌고 수량이 배가됨을 증명하고 보급하여 많은 호평을 받았다.