• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.105-111
• /
• 2005

Purpose : Daily Q.A is the important step which must be preceded in a radiation treatment. Specially, radiation output measurement and laser alignment, SSD indicator related to a patient set-up recurrence must be confirmed for a reasonable radiation treatment. Daily Q.A proceeds correctness and a prompt way, and needs an objective measurement basis. Manufacture of the device which can facilitate confirmation of output measurement and appliances check at one time was requested. Materials and Methods : Produced the phantom formal daily check device which can confirm a lot of appliances check (output measurement and laser alignment. field size, SSD indicator) with one time of set up at a time, and measurement observed a linear accelerator (4 machine) for four months and evaluated efficiency. Results : We were able to confirm an laser alignment, field size, SSD indicator check at the same time, and out put measurement was possible with the same set up, so daily Q.A time was reduced, and we were able to confirm an objective basis about each item measurement. As a result of having measured for four months, output measurement within ${\pm}2%$, and measured laser alignment, field size, SSD indicator in range within ${\pm}1mm$. Conclusion : We can enforce output measurement and appliances check conveniently, and time was reduced and was able to raise efficiency of business. We were able to bring a cost reduction by substitution expensive commercialized equipment. Further It is necessary to makes a product as strong and slight materials, and improve convenience of use.

• Journal of radiological science and technology
• /
• v.37 no.3
• /
• pp.177-185
• /
• 2014

This study focused on effects of patient exposure dose reduction with AEC (Auto Exposure Control) marker that is designed for showing location of AEC in X-ray Chest radiography. It included 880 adults who have to use Chest X-ray Digital Radiography system (DRS, LISTEM, Korea). AEC (Ion chambers are posited in top of both sides) are used to every adult and set X-ray system as Field size $17{\times}17inch$, 120kVp, FFD 180cm. 440 people of control group are posited on detector to include both sides of lung field and the other 440 people of experimental group are set to contact their lung directly to Ion chamber (making marker to shows location). Then, measured every DAP and, estimated patient effective dose by using PCXMC 2.0. The average age of control group (M:F=245:195) is 53.9 and the average BMI is 23.4. BMI ranges from under weight: 35, normal range: 279, over weight: 106 to obese: 20 and average DAP is 223.56mGycm2, Mean effective dose is 0.045mSv. The average age of experimental group (M:F=197:243) is 53.7 and the average BMI is 22.7. BMI ranges from under weight: 34, normal range: 315, over weight: 85 to obese: 6 and average DAP is 207.36mGycm2, Mean effective dose is 0.041mSv. Experimental group shows less Mean effective dose as 0.004mSv (9.7%) than control group. Also, patient numbers who got over exposure more than 0.056mSv (limit point to know efficiency of AEC marker) is 65 in control group (14.7%), 19 in experimental group (4.3%) and take statistics with t-Test. The statistical difference between two groups is 0.006. In order to use proper amount of X-ray in auto exposure controlled chest X-ray system, matching location between ion chamber and body part is needed, and using AEC marker (designed for showing location of ion chamber) is a way to reduce unnecessary patient exposure dose.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.381-388
• /
• 2017

Purpose: Unpredictable shrinkage of zirconia during sintering process causes discrepancy. Therefore, there have been attempts to reduce discrepancy by milling zirconia after sintering. However, due to the hardness of sintered zirconia, milling takes longer time, causes damage to the machine and causes chip formation. With customized zirconia block using the mean dimension of prepared natural dentition, it is expected to overcome these shortcomings. Materials and methods: The mean dimension of prepared natural dentition was analyzed as STL file after scanning of prepared teeth treated at SNUDH. The transverse, frontal and sagittal planes were set using Mimics and Photoshop. 3D volume was projected on each plane, and the outer line was measured through external tangent line, and the inner line was measured through inflection point of tangent line. Results: The mean height of prepared incisal (N = 57) is $6.60{\pm}1.05mm$, mesiodistal length is $2.98{\pm}0.73mm$, buccolingual length is $2.04{\pm}0.73mm$. The mean height of prepared premolar (N = 15) is $5.37{\pm}1.49mm$, mesiodistal length is $4.10{\pm}1.78mm$, buccolingual length is $5.86{\pm}1.55mm$. And the mean height of prepared molar (N = 13) is $5.11{\pm}1.29mm$, mesiodistal length is $6.80{\pm}1.18mm$, buccolingual length is $7.34{\pm}1.40mm$. Conclusion: Using the mean dimension of prepared natural dentition, it is expected to be able to fabricate customized zirconia block.

• Korean journal of communication and information
• /
• v.32
• /
• pp.209-245
• /
• 2006

This study examines primarily the effects of perceived risk and scarcity massage on consumers in CATV homeshopping. For consumers, the perceived risk is the cause of delaying purchase decision in CATV Homeshopping while scarcity message in the Ad facilitate purchasing intention in the CATV homeshopping. And another important characteristic of consumer which exerts impact on the response of consumer to the Ad and the product is the frequency of purchasing experience. Thus the purpose of this study is to test the effect of 3 factors on consumer's response to homeshopping Ad and product: one is perceived risk, another is scarcity message and the third is consumer's difference in purchasing. And these are defined as independent variables. The responses of the consumer, the dependent variables of this test are measured in three dimensions; 1) the purchasing intention of the product, 2) the attitude toward the Ad, and 3) the attitude toward product of the consumer. 110 housewives are sampled and assigned to 4 experimental groups. All the groups first watched a video-taped homeshopping Ad messages, and then filled up their responses on the administered questionnaire. The results of this study shows as follows: 1) Perceived risk has negative effect to consumer response. 2) Scarcity message has positive effect to consumers response. 3) But especially perceived risk has negative effect to high frequency purchasing experience group. 4) Scarcity message has also negative effect to high frequency purchasing experience group. 5) The interaction effect of perceived risk and scarcity message is most prominent to the consumers of high frequent purchasing experience.

• Korean journal of applied entomology
• /
• v.53 no.4
• /
• pp.375-380
• /
• 2014

The sweetpotato whitefly (SPW), Bemisia tabaci Gennadius, is a major pest in tomato greenhouses on Jeju Island because they transmit viral diseases. To develop practical sampling methods for adult SPWs, yellow-color sticky traps were used in commercial tomato greenhouses throughout the western part of Jeju Island in 2011 and 2012. On the basis of the size and growing conditions in the tomato greenhouses, 20 to 30 traps were installed in each greenhouse for developing a sampling plan. Adult SPWs were more attracted to horizontal traps placed 60 cm above the ground than to vertical trap placed 10 cm above the plant canopy. The spatial patterns of the adult SPWs were evaluated using Taylor's power law (TPL) and Iwao's patchiness regression (IPR). The results showed that adult SPWs were aggregated in each surveyed greenhouse. In this study, TPL showed better performance because of the coefficient of determination ($r^2$). On the basis of the fixed-precision level sampling plan using TPL parameters, more traps were required for higher precision in lower SPW densities per trap. A sequential sampling stop line was constructed using TPL parameters. If the treatment threshold was greater than 10 maximum adult SPWs on a trap, the required traps numbered 15 at a fixed-precision level of 0.25. In estimating the mean density per trap, the proportion of traps with two or more adult SPWs was more efficient than whole counting: ${\ln}(m)=1.19+0.90{\ln}(-{\ln}(1-p_T))$. The results of this study could be used to prevent the dissemination of SPW as a viral disease vector by using accurate control decision in SPW management programs.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.161-166
• /
• 2005

Objectives of this study were to select inbred lines which have a good eating quality and desirable segregates during inbreeding of waxy corn. The 64 inbred lines showed a large variance in their kernel shape and weight. 100-kernel weight, pericarp thickness, kernel length, kernel width, and kernel thickness ranged $11.7\~37.3g,\;11\~77{\mu}m,\;5.8\~9.6mm,\;6.5\~10.0mm$, and $4.1\~6.8mm$, respectively. The physicochemical analysis of 64 waxy corn inbred lines showed crude protein, crude fat, free sugar, and amylopectin content ranging $8.7\~15.8\%,\;2.3\~5.8\%,\;1.1\~11.0\%,\;and\;78.5\~93.8\%$, respectively. The texture property analysis of 64 inbred lines by texture analyzer showed a big difference. Gumminess, hardness, and chewiness of 64 inbred lines ranged $91\~383,\;181\~394,\;and\;73\~370$, respectively. The principal component analysis for 14 characteristics related to kernel quality showed that $73.1\%$ of the total variation could be attributed to the first five principal components. Biological meaning of the principal component was explained clearly by the correlation coefficient between principal components and characters. The first principal component appeared to correspond to small kernel and bad eating quality, The second principal component appeared to correspond to large kernel and good eating quality. The 64 inbred lines were classified into 8 groups by the cluster analysis using the first and second principal component. Among the groups, group VII and VIII included inbred lines with good eating quality that had thin pericarp thickness, low protein content, large kernel, and soft tenderness.

• Korean Journal of Poultry Science
• /
• v.21 no.1
• /
• pp.1-19
• /
• 1994

This study was carried out to investigate the effects of shperical surface of eggs tray and eggshell on breaking strength of eggs for the development of a new egg tray design to prevent eggshell breakage. The results obtained were as follows: 1. According to the results obtained from investigation on the types of 22 egg trays collected from 9 countries(USA, Italy, France, Thailand, Japan, Netherland, Russia, Korea and Swiss), all egg trays except those from Korea were different in their types. 2. According to the determination of breaking strength for 4 pilot egg trays, type B and D were high in breaking strength. Trays B and D which would fit with the spherical surface of egg so that they could increase breaking strength were most recommendable. Breaking strength was not increased even though egg tray was strong. Thickness of eggshell of experimental eggs used in this experiment have no significance (P>0.05). 3. When eggs are packed and transported in egg tray, the breaking strength will depend on how much spherical surface of egg are covered by the spherical surface of the egg tray. Therefore, the inner spherical surface of egg tray must fit to the outer spherical surface of eggs when the egg tray is manufactured. 4. At present, there is only one type of egg tray being used in Korea despite the various egg sizes. In order to minimize the eggshell breakage, however, proper sizes or types of egg trays should be developed for each different categories of the egg size.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.3
• /
• pp.231-241
• /
• 1992

To study the relationships between major micrometeorological elements and their influences on evapotranspiration(ET) in the canopy of two rice cultivars, Daecheongbyo and Samgangbyo, synoptic meteorological factors, micrometeorological elements and ET from the canopy and biomass production were observed at various growth stages in the paddy field of Suwon Weather Forcast Office in 1989. ET from the rice community was highly correlated with the following factors in order of pan evaporation>air temperature>leaf temperature>solar radiation>sunshine duration>difference in vapor pressure depicit(VPD)>water temperature. ET observed showed higher correlation with the evaporation from small pan than that from Class A pan. Varietal difference would be noted in the relationships between ET in Samgangbyo canopy and the evaporations observed from the pans, with which closer a correlation was found in Samgangbyo than in Daecheongbyo. The ratio of canopy ET to the evaporation from Class A pan was maintained over 1.0 through the growth stages with the maximum of 1.9 at the late August. The evaporation observed from Class A pan was amounted to 71.9% of that from small pan. ET was better correlated with solar radiation than with net radiation which reached about 66% of solar radiation. Maximum temperature showed higher correlation with ET than mean air temperature, and also wind speed of 1m above ground revealed positive correlation. The relative humidity, however, had no correlation with the exception of ET in rainy days. A regression model developed to estimate ET as a function of meteorological elements being described with $R^2$ of 0.607 as : $ET=-5.3594+0.7005Pan\;A+0.1926T_{mean}+0.0878_{sol}+0.025RH$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.24 no.3
• /
• pp.269-281
• /
• 2008

Fatigue or overload can result in mechanical problems of implant components. The mechanical strength in the implant system is dependent on several factors, such as screw and fixture diameters, material, and design of the fixture-abutment connection and abutment. In these factors, the last rules the strength and stability of the fixture-abutment assembly. There have been some previous reports on the mechanical strength of the fixture-abutment assembly with the compressive bending test or short-term cyclic loading test. However, it is restrictive to predict the long-term stability of the implant system with them. The purpose of this study was to evaluate the influence of the design of the fixture-abutment connection and abutment on the mechanical strength and failure mode by conducting the endurance limit test as well as the compressive bending strength test. Tests were performed according to a specified test(ISO/FDIS 14801) in 4 fixture-abutment assemblies of the Osstem implant system: an external butt joint with Cemented abutment (group BJT), an external butt joint with Safe abutment (group BJS), an internal conical joint with Solid abutment (group CJO), and an internal conical joint with ComOcta abutment (group CJT). The following conclusions were drawn within the limitation of this study. Compressive bending strengths were decreased in order of group BJS(1392.0N), group CJO(1261.8N), group BJT(1153.2N), and group CJT(1110.2N). There were no significant differences in compressive bending strengths between group BJT and group CJT(P>.05). Endurance limits were decreased in order of group CJO(600N), group CJT(453N), group BJS(360N), and group BJT(300N). 3. Compressive bending strengths were influenced by the connection and abutment design of the implant system, however endurance limits were affected more considerably by the connection design.

• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.89-95
• /
• 2007

This study was carried out to evaluate soil properties by regions from chestnut (Castanea crenata Sieb. et Zucc) stands in Gyeongnam province. Soil physical and chemical properties were measured from soil samples of top 20 em collected from three hillslopes (upper, middle, lower) of the chestnut stands in six regions (Jinjusi, Sacheonsi, Sancheonggun, Hadonggun, Goseonggun, Hapcheongun) where are major chestnut cultivation areas throughout the province. Soil properties were significantly different among regions (p<0.05), while were not significantly different among hillslopes (p>0.05). Soil bulk density, soil pore space, soil pH, organic matter content, total nitrogen, available phosphorus, and CEC were significantly different among regions (p<0.05). Soil bulk density was significantly lower (p<0.05) in Hadonggun ($0.96g/cm^3$ than in other regions ($1.12{\sim}1.22g/cm^3$). Soil pH was below pH 5.03 in most regions and Sancheonggun showed the lowest soil pH value (pH 4.62), followed by Jinjusi, Hadonggun, Hapcheongtm, Goseonggun, and Sacheonsi. Organic matter content was highest in Hadonggun (6.46%), while other regions ranged between 2.93% and 3.47%. Total nitrogen content showed a similar trend like the organic matter content. Available phosphorus was above 100 ppm in Jinjusi, Hadonggun and Sancheonggun, but Sacheonsi showed the lowest concentration (15 ppm) among the regions. Cation Exchange Capacity (CEC) was above 10 cmolc/kg in Goseonggun and Hadonggun, but below 8.6 cmolc/kg in Jinjusi and Hapcheongtm. Potassium content ranged between 0.07 and 0.14 cmolc/kg, and magnesium was above 0.66 cmolc/kg in all regions. The results indicate that soil property in chestnut stands was different among regions in Gyeongnam province. This suggested that the chestnut stands should be managed by the fertilization application reflected in the variability of regional soil property in chestnut stands.