• Journal of the Mineralogical Society of Korea
• /
• v.28 no.2
• /
• pp.135-145
• /
• 2015

In order to predict the deterioration of stone monument due to acid fog, an artificial fog test using pH4.0 and pH5.6 was applied to the Gyeongju Namsan granite, decite and marble. After the test had weathered Gyeongju Namsan granite a larger weight reduction due to acid fog than fresh one. Decite has shown the most significant changes among the tested rocks with about 0.005 % of weight reduction. Decite and weathered granite will have considerable weight reduction due to acid rain than the acid fog, whereas the marble was expected to show a weight reduction regardless of the phase of water. The porosity and water absorption rate of weathered granite had significantly increased. This result means that the weathered rock is predicted to be more susceptible to acid fog than the fresh rock. The absorption rate of the marble after the test had shown approximately 50 % increase. The color of the samples had slightly changed towards yellow, such tendency was greater shown in weathered rocks. The marble reacted with acid fog had an increased whiteness. A large amount of cation in the samples is caused mainly by the dissociation of minerals through the reaction with acid fog.

• Korean Journal of Microbiology
• /
• v.48 no.1
• /
• pp.22-28
• /
• 2012

Vibrio parahaemolyticus is one of the major agents responsible for food poisoning during summer in Korea, which is transmitted via seawater or seafoods. Recently, distribution of the bacteria in the marine environment has been increased due to global warming. Great concern also has been raised regarding public hygiene as well as marine culture by the emergence of pathogens with antibiotic resistance. Therefore, distribution of V. parahaemolyticus and antibiotic resistance of the isolates were monitored in 7 coastal areas of Kyonggi Province and Incheon by sampling seawater, fishes and clams monthly. V. parahaemolyticus was detected from 47.7% of 966 samples (seawater 61.9%, seafoods 41.8%) analyzed using $CHROMagar^{TM}$ and TCBS agar plates as well as multiplex PCR. Among 13 antibiotics tested, resistance to vancomycin and ampicillin was observed in 97.3% and 87.3% of the isolates, respectively, and the ratios of them resistant to cephalothin (48.8%) and rifampin (46.1%) were also high. The isolates were most highly sensitive to chloramphenicol (91.7%) and trimethoprim-sulfamethoxazole (91.8%). The ratio of sensitivity for other antibiotics was also high in the descending order of gentamycin (82.3%), tobramycin (74.8%), nalidixic acid (71.6%), tetracyclin (69.4%), cefotaxime (63.0%). About 69% of the isolates showed multiple drug resistance toward 3 antibiotics including vancomycin and ampicillin. Two of them exhibited resistance for 11 antibiotics used in this study. Plasmid profile analysis of the isolates with antibiotic resistance revealed that 55.1% of them retained plasmids of 24 different types. However, no clear inter-relationship between the resistance and the plasmid profile has been observed.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.147-154
• /
• 2009

The change of strength and water vapour diffusion resistant by soluble salts was investigated in the tuff and granite used in many stone monuments of Gyeongju area. With $Na_2SO_4$ and $CaSO_4{\cdot}2H_2O$ were treated the rock samples to understand the difference of solubility. The densities of the tested rocks were increased by the impregnation of $CaSO_4{\cdot}2H_2O$ and $Na_2SO_4$. The flexural strength was increased in the tuff samples but decreased in the granite as the salts increased in the pore. In the tuff, the uniaxial compressive strength was increased by $CaSO_4{\cdot}2H_2O$, but decreased by $Na_2SO_4$. In the granite, it was decreased slightly by $CaSO_4{\cdot}2H_2O$, but increased by $Na_2SO_4$. The water vapour diffusion resistant was increased by the salts in both rocks. As results, it was cleared that the mechanical strength colud be increased in early stage of weathering by the accumulation of salt and water vapour diffusion resistant.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.98-105
• /
• 2006

This study was performed to investigate the product characteristics of meat products sold in Korean markets and determine if these products meet the comsumer demands. The total nineteen meat produce were evaluated the physico-chemical, textural properties, and microbial counts of total bacteria and Enterobacteriaceae. pH values were ranged from 5.46 to 6.69, moisture $47.6{\sim}65.3%,\;fat\;14.2{\sim}34.7%,\;and\;9{\sim}20%$ and the pH values of ham products were higher than those of sausages. Purge loss(%) and expressible moisture(%) were ranged $2.40{\sim}7.44\;and\;6.10{\sim}21.2%$ respectively. Varied hunter color values (Lightness $59.6{\sim}75.7$, Redness $11.6{\sim}21.1$, Yellowness $2.30{\sim}l1.4$) were observed. Texture profile analysis values were observed and Frank A sausages made with chicken had highest fracturability, hardness and springiness, whereas loin ham and beershinken had highest cohesiveness, gumminess and chewiness. Most meat products had the total microbial counts of less than 3 log CFU/g and Enterbacteriaceae were not detected (< 2 log CFU/g) in this study. These data suggested that the meat products sold in Korean market were various and relatively safe. In addition, well-being meat products, such as low-fat, salt and containing functional ingredient, should be developed to meet the consumer needs these days.

• Analytical Science and Technology
• /
• v.16 no.6
• /
• pp.483-487
• /
• 2003

Amitrole is well-known as a non-selective herbicide and it is able to cause contamination of driking water as well as pollution of ground water and surface water. However, it is difficult to extract from water because it has a high solubility for water whereas a low solubility for general organic solvents. This method is described for the determination of amitrole in water samples by GC/MS. After evaporation of 10 mL water sample by a vacuum evaporator, amitrole was derivatized with isobutyl chloroformate (iso-BCF) on room temperature for 15~20 min. As a result, the sensitivity for GCfMS was improved as N-isobutoxycarbonyl amitrole derivative was formed. The linearity of the calibration curve showed good as 0.997. The recoveries were obtained more than 94.9% and relative standard deviations were less than 2.8% at $1.0{\mu}g/L$, $10.0{\mu}g/L$ and $100.0{\mu}g/L$. The limit of detection showed $0.1{\mu}g/L$ with a signal-to-noise ratio (S/N) of 3.

• 보존과학연구
• /
• s.33
• /
• pp.109-124
• /
• 2012

Jangan-eup, located in Busan, South Korea,is a famous pottery-producing area in the Joseon Dynasty period. The aim of this paper was to determine the correlation of the pottery from each kiln site of Jangan-eup by analyzing the ingredients of clay as well as its production technique and firing condition. The materials that were used for the study were fragments of inlaid celadon, white porcelain, and white porcelain painted with underglazed iron excavated from six kiln sites of Jangan-eup:Sil-li, Daeryong-li, Hajangan-li, Sangjangan-li, Yongso-li, and Dumyeong-li. In each of the samples from the six kilns, cristobalite, mullite, and quats were found. The firing temperature distinguished from the crystal structure was higher in the following order: Dumyeongli>Sangjangan-li>Daeryong-li>Hajangan-li>Yongso-li>Sil-li. The samples were divided into four groups based on the ingredients of the clayfound therein: the Sil-li andDaeryong-li group, the Hajangan-li and Sangjangan-li group, the Yongso-li group, and the Dumyeong-li group. It was also found that the sample of Dumyeong-li was made using the most homogeneous clay compared with the other samples. The pottery of Jangan-eup had $40-400{\mu}m$ glaze, had bubbles in their bodies, and had $10-150{\mu}m$ sizes.

• Korean Journal of Food Science and Technology
• /
• v.42 no.2
• /
• pp.125-129
• /
• 2010

Isoflavone distribution and $\beta$-glucosidase activity in 16 commercially available doenjang samples were determined. Twelve of the samples were home-made doenjang (HMD) with a relatively long fermentation period and 4 of the samples were factory-produced doenjang (FPD) from four different manufactures. Total isoflavones (TI) in the HMD ranged from $370-723\;{\mu}g/g$, while those in FPD ranged from $179-537\;{\mu}g/g$. The isoflavone distribution in HMD was different from those in FPD. Generally, the TI in HMD was higher than those in FPD. The major isoflavone was aglycones, which ranged from 42.98 to 89.96% in HMD and from 35.51 to 93.48% in FPD. Isoflavones in the $\beta$-glucoside forms were not detected in tested FPD samples. Principal components analysis (PCA) of the isoflavone profiles showed that HMD were differentiated from FPD. First principal component (PC1) and second principal component (PC2) expressed 43.6 and 22.9% of the data variability, respectively. $\beta$-Glucosidase activity in doenjang was lower than that in raw soybeans. The results of this study can be used to understand the differences in the isoflavone distribution in traditionally manufactured and factory produced doenjang.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.5
• /
• pp.680-689
• /
• 2016

The present study evaluated the validation method for isoflavone contents of fermented soybean extracts by bioconversion as well as their antioxidant activities. Our results show that the total isoflavone contents of non-fermented and fermented soybean extract ranged between 119.8 to $637.7{\mu}g/g$ and between 567.3 to $2,074.6{\mu}g/g$, respectively. Moreover, fermented soybean extracts had higher contents of isoflavone aglycones, including daidzein, glycitein, and genistein than non-fermented soybean extracts as well as lower contents of isoflavone glucosides such as daidzin, glycitin, and genistin. FRAP and ORAC values ranged between 0.15 to 0.22 and between 195.24 to $753.79{\mu}M$ Trolox equivalents/g in non-fermented and fermented soybean extracts, respectively. These results indicate that fermented soybean extracts had higher total isoflavone contents and antioxidant activities than non-fermented soybean extracts. Bioconversion process in this study may have the potential to produce isoflavone-enriched natural antioxidant agents with high added value from soybean matrices.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.4
• /
• pp.177-188
• /
• 1989

The purpose of this study was to investigate the detoxifying effect on PSP-infested sea mussel, Mytilus edulis, by heating treatment and correlation between the PSP toxicity and the environmental conditions of shellfish culture area such as temperature, pH, salinity, density of Protogonyaulax sp. and concentration of inorganic nutrients such as $NH_4-N,\;NO_3-N,\;NO_2-N\;and\;PO_4-P$. This experiment was carried out at $Suj\u{o}ng$ in Masan, Yangdo in Jindong, $Hach\u{o}ng\;in\;K\u{o}jedo\;and\;Gamch\u{o}n$ bay in Pusan from February to June in $1987\~1989$. It was observed that the detection ratio and toxicity of PSP in sea mussel were different by the year even same collected area. The PSP was often detected when the temperature of sea water about $8.0\~14.0^{\circ}C$. Sometimes the PSP fox of sea mussel was closely related to density of Protogonyaulax sp. at $Gamch\u{o}n$ bay in Pusan from March to April in 1989, but no relationship was observed except above duration during the study period. The concentration of inorganic nutrients effects on the growth of Protogonyaulax sp., then effects of $NO_3-N$ was the strongest among them. When the PSP-infested sea mussel homogenate was heated at various temperature, the PSP toxicity was not changed significantly at below $70^{\circ}C$ for 60 min. but it was proper-tionaly decreased as the heating temperature was increased. For example, when the sea mussel homogenate was heated at $100^{\circ}C,\;121^{\circ}C$ for 10 min., the toxicity was decreased about $67\%\;and\;90\%$, respectively. On the other hand, when shellstock sea mussel contained PSP of $150{\mu}g/100g$ was boiled at $100^{\circ}C$ for 30 min. with tap water, the toxicity was not detected by mouse assay, but that of PSP of $5400{\mu}g/100g$ was reduced to $57{\mu}g/100g$ even after boiling for 120 min.

• Journal of Food Hygiene and Safety
• /
• v.38 no.2
• /
• pp.46-54
• /
• 2023

In this study, we examined the residual amounts of formaldehyde in hygiene products to determine the safety of these products in Gyeonggi-do. Formaldehyde is among the harmful substances that may remain within certain hygiene products. On the basis of an analysis of formaldehyde in a total of 222 items (6 disposable paper straws, 9 disposable paper napkins, 21 toilet papers, 13 disposable dishcloths, 16 disposable paper towels, 32 wet wipes for food service restaurants, 25 disposable cotton swabs, and 100 disposable diapers), we detected traces in three wet wipes for food service restaurants (1.87 to 4.45 mg/kg), which is approximately 9% to 22% of the standard level (20 mg/kg). We established that all the hygiene products assessed in the study met the individual standards for formaldehyde, thereby confirming that safe products are being distributed. In the standards and specifications for hygiene products, the formaldehyde test method is regulated for application with respect to three categories based on the type of product. The samples used in this study were of types for which method 1 or method 2 is applied, and the limits of detection, limits of quantification, linearity, and recovery rates were reviewed to verify the validity of each test method. When method 2 was applied, we experienced interference when performing analysis at a wavelength of 412 nm, which was associated with the influence of impurities in some samples of disposable cotton swabs and disposable diapers. Consequently, in these cases, the results were compared after analysis using method 1. By comparing the results obtained using method 2 with those obtained using method 1, the latter of which were unaffected by the interference of impurities, we were able to detect formaldehyde at low concentrations. These findings accordingly highlight the necessity to standardize the formaldehyde test method for future analyses.