• Magazine of the Korean Society of Agricultural Engineers
• /
• v.18 no.2
• /
• pp.4105-4115
• /
• 1976

• Journal of Korean Society of Forest Science
• /
• v.94 no.4 s.161
• /
• pp.277-280
• /
• 2005

In order to prevent chestnuts from damage by the peach pyralid moth, Dichocrosis punctiferalis, a sprinkler system was installed on the chestnut orchard. Such a test was conducted at Yeoju-gun, Gyeonggi-do, Korea in 2002. Insecticides of fenitrothion 50% EC, x1,000 and diflubenzuron 25% Wp, x2,500 were sprayed at ten-day fifteen-day and twenty-day intervals during the period of D. punctiferalis adult occurrence by sprinkler system. The peach pyralid moths generally emerged for about 60 days from early July to early September, and peak emergence was 10 days from late July to early August. Damage rate of chestnuts were 0.9-4.0% on average with this crown insecticide spraying with diflubenzuron, while 30.4% when not treated. Control effectiveness of this insecticide spraying was 92%(86.7-97.0%). In conclusion, effectual times and number of insecticide application with sprinkle system against peach pyralid moth were from early July to late August and four or five times at ten or fifteen day intervals, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.11
• /
• pp.3260-3268
• /
• 2009

A test apparatus has been fabricated to simulate chemical effect on head loss through a strainer in a pressurized water reactor (PWR) containment water pool after a loss of coolant accident (LOCA). Tests were conducted under condition of same ratio of strainer surface area to water volume between the test appratus and the containment sump. A series of tests have been performed to investigate the effects of spray, existence of calcium-silicate with tri-sodium phosphate (TSP), and composition of materials. The results showed that head loss across the chemical bed with even a small amount of calcium-silicate insulation instantaneously increased as soon as TSP was added to the test solution. Also, the head loss across the test screen is strongly affected by spray duration and is increased rapidly at the early stage, because of high dissolution and precipitation of aluminum and zinc. After passivation of aluminum and zinc by corrosion, the head loss increase is much slowed down and is mainly induced by materials such as calcium, silicon, and magnesium leached from NUKONTM and concrete. Furthermore, it is newly found that the spay buffer agent, tri-sodium phosphate, to form protective coating on the aluminum surface and reduce aluminum leaching is not effective for a large amount of aluminum and a long spray.

• Journal of Korean Society of Forest Science
• /
• v.94 no.1 s.158
• /
• pp.21-25
• /
• 2005

In order to prevent the pine mushrooms, Tricholoma matsutake, from being damaged by the pine needle gall midges, Thecodiplosis japonensis, and thereby, to increase their production and improve their quality, a sprinkler system was installed on the mushroom field. A low-concentration insecticide (deltamethrin 1% EC, x2,000) was sprayed once at insects' most active time every day during the period of insects' adult occurrence and thereafter, the irrigation by ground water spraying was periodically enforced. Such a test was conducted at Yangyang-Gun, Kwangwon-do, Korea for 2 years from 2000 through 2001. The pine needle gall midges generally emerged for about 40 days from late May to early July. 50% emergence of them was about June 6, and peak emergence (more than 80%) was early or mid-June. Gall formation rate was 3.5% on average with this ground insecticide spraying, while 51.3% when not treated. Control effectiveness of this insecticide spraying was 92.3%, which was higher than 82.5% by the conventional injection of insecticide into tree stems. Pine mushrooms emerged for about 35 days from mid-September through earlier October, and around 80% of them did for about 15 days from late September through early October. As a result of the periodic ground water-spraying (30 mm per week) for 2 months (from August to October), the production of mushrooms increased by 74.3% (110% in terms of weight), with their quality improvement. The mushrooms produced from the treated stand by the spraying system were priced 8,670,000 wons per hectare, and thus, the net income deducting the facility and management cost was 4,310,000 wons, about 5% higher than value from the control stand. It was analyzed that this treatment was significantly cost effective when the facilities are used more than 5 years.

• Fire Protection Technology
• /
• s.2
• /
• pp.60-63
• /
• 1988

• Journal of the Society of Disaster Information
• /
• v.14 no.2
• /
• pp.107-114
• /
• 2018

Purpose : This study is to develop walls using wall recording technology applied on roofs to prevent fire spread in traditional markets. Method : The spray head installed on the developed wall was designed so that the fire does not spread to adjacent buildings after being used for plants. In addition, a spray head was attached to the upper section and some sections for the growth of plants planted on the wall to prevent the spread of fire. Results : These technologies suggested the development of walls that can be installed at the upper level of buildings, such as traditional markets, and separate isolation facilities were not necessary because they are integrated with structures and sprinklers. In addition, sprinklers can perform both the plant spray and fire spread prevention functions. It is believed that this is the only alternative technology proposed in Korea to prevent the spread of fire. Conclusion : In this study, the wall design, designed directly to derive the quantitative performance of the fire spread reduction effect, demonstrated the fire suppression method of the wall system, the durability of the wall itself, and the flame retardability performance.

• Environmental engineer
• /
• v.24 s.254
• /
• pp.54-59
• /
• 2007

본 기술은 각종 산업시설과 환경 기초 시설로부터 대기중으로 배출되는 악취 및 휘발성 유기화합물(Volatile Organic Chemicals; VOC)을 미생물의 분해 작용을 활용하여 제거하는 장치로 오염 물질의 분해과정에서 미생물의 과다생장에 의한 악취 및 휘발성 유기화합물 제거장치의 막힘현상을 미생물 고정화 담체의 교반과 살수과정을 통해 담체표면의 생물막을 효과적으로 제거하는 방법을 이용하여 오염 가스속에 함유되어 있는 악취 및 휘발성 유기화합물을 효율적으로 제거할 수 있는 기술이다. 특히, 미생물 담체의 교반 장치는 미생물 고정화 담체를 교반시켜 생물막을 탈리 시킴으로써 미생물의 생장에 의한 막힘 현상과 이로 인한 압력 손실 증가와 악취 및 휘발성 유기화합물의 제거성능의 저하를 근본적으로 해결할 수 있다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.11a
• /
• pp.267-270
• /
• 2007

오존무 분사장치는 흡입구와 내에 소정의 공간이 형성된 케이스와 자동 손잡이와 $360^{\circ}$회전이 가능해 운반 및 이동이 간편한 케이스, 상기 케이스의 내부 소정 부위에 공기 흡입구로 흡입되는 공기 중에 포함된 먼지 및 습기를 제거하는 제습 장치와, 원료가스인 공기를 일정하게 제공하는 송풍기, 강력한 살균 소독기능을 지닌 오존발생기, 오존을 발생시키기 위한 고주파 펄스 전원장치, 입자경이 $3{\sim}40{\mu}m$이하의 이류체 미세 분사형 노즐, 살수통(물을 담는 용기) 및 기능 조절부(펄스전원제어, 타이머 조절, 송풍기 제어, 이류체 미세 분사형 노즐스위치 제어)로 성되어 작동하는 것으로 일반적인 가습기와는 다르다. 그리고 강력한 살균, 소독, 탈취 및 대기의 정화 기능이 있는 오존을 이용하는 동시에 기존의 방식보다 간단한 구조의 분무발생 수단을 구비함으로써 전체적으로 구성을 간단하게 하면서 대기 정화 효율을 향상시키는 장점이 있다.

• Journal of Bio-Environment Control
• /
• v.8 no.4
• /
• pp.223-231
• /
• 1999

The one of basic functional conditions of suspended overhead sprayer, which is openly made use of irrigating on bedding plants in greenhouse, is to be kept the growing uniformity of bedding plants by making uniformly the spraying irrigation depending on the distribution of sprayed water. This study was performed to find out the optimum position of sector formed injection nozzle which is placed from the top of plant 0 the tip of the nozzle to keep spraying uniformity. The test of spraying distribution using a overhead sprayer, which was installed in a row of sector formed injection nozzles, was performed The measuring factor to represent spraying distribution was the water weight filled in each cup when the overhead sprayer was moving across the upside of the cups which were placed directly under the nozzles on keeping the distance from nozzle tip. The test results were as following , The standard mr of weights of each cup filled with spraying water was lower values at Position far from more than 60cm under nozzle tip. The driving speed variation of sprayer was not effected on spraying uniformity but the spraying water weight was inversely proportioned to the speed. To make best spraying uniformity, it was represented that the tip of the nozzle is positioned to keep the distance which the top of plants is placed at the second cross point of each injection sector of nozzles.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.53-57
• /
• 2018

고도의 산업화에 따라 도시의 성장과 인구의 밀집으로 인하여 물의 수요가 증가하고 이에 따라 각종 오염원의 유입이 증가함에 따라서 적절한 수질 관리에 대한 필요성이 대두되고 있다. 그리고 산업이 다양화됨에 따라 배출되는 하 폐수의 특성도 다양해져 기존의 수질처리장은 효율적인 처리를 하는데 있어 많은 어려움이 발생되고 있다. 굴 패각은 하수처리의 담체로 이용할 경우 살수여상의 문제점 중 하나로 나타나는 막힘 현상을 다소 감소시킬 수 있고, 다공질체로서 표면적이 불규칙하고 비표면적이 크기 때문에 반응기내에 공기를 원활하게 공급할 수 있으며, 중금속 이온과 유기물에 대한 흡착 효율이 뛰어나 미생물이 쉽게 부착, 성장할 수 있는 장점을 가지고 있다. 천연광물질은 전 세계적으로 발견되어 활용된 역사가 짧지만, 그 특징은 산소결핍보충, 유해원소 흡착 성능, 반도체 작용, 인체 면역력 강화, 바이러스성 질병의 예방, 중금속 해독 등의 다양한 특징으로 환경호르몬 제고, 음이온 원적외선 발생으로 세포의 노화방지, 인체 노폐물 제거와 같은 특징을 지닌 매우 유용한 자원으로 확인되고 있으며, 수질정화 능력이 탁월한 것으로 보고 있다. 이에 본 연구는 어촌폐기물인 굴 패각과 수질정화에 탁월한 천연 광물질을 혼합하여 경제적이고, 효율성이 높은 다공성 수질개선 담체를 개발하고, 수목여과용 비점오염시설 장치에 적용하여 혼합 담체가 수처리 시설의 담체로서 사용이 가능한지, 수목여과용 비점오염시설 장치에 적용할 수 있는지 검토하고자 수행하였다. 이 연구는 2017년 중소기업청 기술개발사업에서 연구지원을 받아 연구되었습니다.