Proceedings of the Korean Vacuum Society Conference
/
1999.07a
/
pp.48-48
/
1999
티타늄 알루미나이드 합금은 이들의 강도나 고온 특성 때문에 초음속 비행기의 구조물질이나 수소를 연료로 사용하는 비행기의 엔진물질로 각광받고 있다. 그러나 티타늄 알루미나이드 합금들은 이들이 갖는 규칙적인 미세구조로 인하여 실온에서 낮은 연성을 나타내는 단점이 있다. 실온에서 낮은 연성을 갖는 티타늄 알루미나이드 합금의 단점은 텅스텐, 물리브덴, 니오비움, 탄타륨, 바나디움 등의 베타 안정화 물질들을 첨가함으로서 어느정도 극복되고 있다. 따라서 티타늄 알루미나이드 합금이 초음속 비행기의 구조 물질이나 수소를 사용하는 엔진 물질로 사용되기 위해서는 이 물질들의 산화연구가 필수적이다. 지금까지 티타늄의 산화연구에서 알루미늄이나 니오비움의 역할에 대해서는 여러 연구자들이 연구를 한 바 있다. Chaze와 Coddet는 알루미늄이 티타늄에서 산소의 용해도를 감소시키고, Chen과 Rosa는 니오비움이 티타늄에서 산화물 형성율을 낮춘다는 것을 각각 알아냈다. 그러나 지금까지 티타늄 알루미나이드의 산화연구는 충분하지 못했다. 지금까지 티타늄 알루미나이드의 산화연구에서 밝혀진 산화운동학의 내용은 가열온도와 가열시간에 따라 크게 다른 두 개 혹은 그 이상의 산화물을 갖는다는 것이다. 본 연구의 목적은 여러 가지 티타늄 알루미나이드 합금의 산화특성을 밝히는 것이다. 이를 위하여 첫 번째 실험은 실온 공기 중에서 자연적으로 산화된 여러 가지 티타늄 알루미나이드 합금들($\alpha$2,$\beta$,${\gamma}$)을 초고진공($\leq$10-11Torr)속에 넣고, 시료의 온도를 실온에서 100$0^{\circ}C$까지 변화시키면서 AES(Auger Electron Spectroscopy)와 ISS(Ion Scattering Spectroscopy)를 사용하여 각각의 온도에서 여러 가지 시료들의 표면조성을 조사했다. 두 번째 실험은 티타늄 알루미나이드 시료를 고순도 공기(hydrocarbon$\leq$0.1^g , pp m) 중에서 각각 $600^{\circ}C$에서 100$0^{\circ}C$까지 가열하여 산화시켰다. 이 시료의 산화도는 각각의 가열온도에서 가열시간을 변하시키면서 TGA(Thermogravimetric Apparatus)로 측정했다. 실온 공기중에서 자연적으로 산화된 여러 가지 티타늄 알루미나이드 합금들을 초고진공속에 넣어 100$0^{\circ}C$까지 가열한 실험에서는 이들 시료에 포함된 알루미늄의 양에 따라서 표면 조성이 크게 다른 것을 알 수 있었다. 그리고 고순도 공기 중에서 100$0^{\circ}C$까지 가열하여 산화시킨 티타늄 알루미나이드 산화물의 산화기구는 명백한 3단계 포물선 산화의 특성을 나타냈다.
We have investigated the effect of the formation of an initial oxide layer on the fabrication of the porous aluminium oxide. The porous aluminium oxide was fabricated by two-step anodization process with a electropolished aluminium foil. Before the first anodization step, the initial oxide layer with thickness of 10 nm was formed under the applied voltage of 1 V and later the anodization was continued under 40 V using oxalic acid solution. With the formation of the initial oxide layer, the anodization process was stable and the anodization current was constant throughout the process. In case of the absence of the initial oxide layer, the anodization was very unstable and the continuous increase in the anodization current was observed. This indicates the formation of the initial oxide layer on the aluminium surface prevents the burning of the surface due to the nonuniform distribution of the applied electric field, and allows the stable anodization process required for the porous aluminium oxide.
전도도가 우수한 알루미늄 및 알루미나 소재를 사용하여 LED 패키지를 제작하였다. 선택적 양극산화 공정을 적용하여 알루미늄 기판 상에 알루미나를 형성하고 이를 유전체로 사용하였다. 패키지 기판에 따른 열저항 및 광량 분석을 위해 알루미늄 기판과 알루미나 기판을 제작하여 성능 비교분석을 진행하였다. 알루미늄 기판이 알루미나 기판보다 우수한 열저항 및 발광효율 특성을 보여주었으며, 이러한 결과는 선택적 양극산화 공정을 사용한 알루미늄 기판이 고출력 LED 패키지용 기판으로 활용할 수 있음을 보여준다.
Kim, Dae-Hwan;Lue, Sang-Hee;Lee, Hyo-Jin;Park, Young-Ok;Lee, Eun-Joong;Kouh, Tae-Joon
Journal of the Korean Magnetics Society
/
v.20
no.5
/
pp.191-195
/
2010
We have investigated the effect of the removal of an initial oxide layer and the anodization time on the growth of the porous alumina layer. The porous alumina layer was fabricated by two-step anodization process with phosphoric acid. We have observed the changes in the uniformity of the pore structure by varying the removing time of the initial oxide layer after the first anodization with phosphoric acid and chromic acid, and noted that its uniformity improves with the removing time. We have also determined the thickness of the alumina layer after the final anodization process and found that the thickness increases linearly with the anodization time. Under 150 V of anodization voltage with phosphoric acid, the growth rate of the porous alumina layer is determined to be 22.5 nm/min.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.302.2-302.2
/
2016
알루미늄 산화막 스퍼터링 공정 중 타겟이 반응성이 있는 산소와 결합하여 산화되는 타겟 오염은 증착 효율의 감소[1]와 방전기 내 아크 발생을 촉진[2]하여 이를 억제하는 방법이 연구되어 왔다. 본 연구에서는 알루미늄 산화막 증착 공정 중 타겟 오염 현상이 기판에 증착된 알루미늄 산화막 특성이 미치는 영향을 분석하였다. 실험에는 알루미늄 타겟이 설치된 6 인치 웨이퍼용 직류 마그네트론 스퍼터링 장치를 활용하였다. 위 장치에서 공정 변수 제어를 통해 타겟 오염 현상의 진행 속도를 제어하였다. 공정 중 타겟 오염 현상을 타겟 표면 알루미나 형성에 따른 전압 강하로 관찰하였고 타겟 오염에 의한 플라즈마 변화를 원자방출분광법을 통해 관찰하였다. 이 때 기판에 증착 된 알루미나 박막의 화학적 결합 특성을 XPS depth로 측정하였으며, 알루미나 박막의 두께를 TEM을 통해 측정하였다. 측정 결과 타겟 오염 발생에 의해 공정 중 인가 전압 감소와 타겟 오염에 소모된 산소 신호의 감소가 타겟 오염 정도에 따라 변동되었다. 또한 공정 중 타겟 오염 정도가 클수록 기판에 증착한 막과 실리콘 웨이퍼 사이에 산소와 실로콘 웨이퍼의 화합물인 산화규소 계면의 형성 증가됨을 확인했다. 위 현상은 타겟 오염 과정 중 발생하는 방전기 내 산소 분압 변화와 막 증착 속도 변화가 산소의 실리콘 웨이퍼로의 확산에 영향을 준 것으로 해석되었다. 위 결과를 통해 스퍼터링 공정 중 타겟 오염 현상이 기판에 증착 된 알루미나 막 및 계면에 미치는 영향을 확인하였다.
Nguyen, Thi Hong;Nguyen, Thi Thuy Nhi;Lee, Man Seung
Resources Recycling
/
v.27
no.3
/
pp.78-85
/
2018
Effect of ball milling treatment on the hydrochloric acid leaching performance of black dross was investigated to recover alumina. Ball milling time and speed showed limited effect on the leaching behavior of the alumina in the mechanically dross. Under the optimum mechanical activation condition (for 1h at 700 rpm), the leaching of alumina in hydrochloric acid solution was significantly affected by leaching time and reaction temperature. MgO was completely dissolved in most of the leaching conditions, while a small amount of Ca, Fe, Si and Ti oxides was dissolved. Although 80% of alumina was dissolved, the dissolved minor components such as Ca, Fe, Mg, Si and Ti oxides should be separated to recover pure alumina solution.
It is intended to evaluate the performance of the shield after manufacturing a shield with cheap and eco-friendly iron oxide and alumina instead of lead, which is a radiation shielding material. After manufacturing the shield by mixing iron oxide and alumina with gypsum, the performance is evaluated by comparing it with gypsum board and lead apron using an X-ray tube. As a result of the experiment, the shielding performance of alumina was lower than that of the gypsum board, and when 50% of alumina was contained, the shielding performance was similar to that of the gypsum board. Iron oxide became similar to the shielding performance of lead apron when it contained about 75%. A shielding material using alumina shows shielding performance similar to that of gypsum, so it is not suitable as a substitute for lead. However, since iron oxide exhibits similar shielding performance to lead, it can be used as an X-ray shielding material to replace lead in the future, so further research is needed.
We have fabricated porous aluminum oxide using flexible and thin aluminum foils with thickness of 0.025 and 0.2 mm. These foils were anodized with 0.3 M oxalic acid solution after being electropolished with ethanol/perchloric acid. During the anodization, the temperature of the electrolyte was maintained at $9^{\circ}C$ and the anodization voltage was varied between 0.4 and 40 V The surface of the anodized aluminum oxide was studied with a scanning electron microscope. From the scanning electron micrograph, we observed that when the voltage applied was above 1 V for a long period of time, due to a strong electrolysis reaction in electrolyte, the surface of the anodized oxide was destroyed. However, when the anodization voltage was less than 1 V, the anodization process was very stable and lasted much longer. Our results show that for a thin aluminum foil, unlike a thick plate, one requires small anodization voltage less than 1 V to form a porous aluminum oxide for long anodization time.
Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
/
2003.08a
/
pp.130-132
/
2003
ALD(Atomic Layer Deposition) 법으로 박막 알루미나를 형성한 후 웨이퍼 접합과 박막화 공정으로 알루미나를 매몰절연막으로 하는 SOI 구조를 제조하고 그 특성을 조사하였다. 알루미나 박막의 유전 특성과 실리콘과의 계면 특성은 C-V 측정으로, 단면 분석은 SEM(Scanning Electron Microscope) 촬영으로 조사하였다. 알루미나와 실리콘을 접합하기 위하여 1100C에서 열처리를 행한 후 알루미나와 실리콘의 계면 상태 밀도는 $2.5{\times}10^{11}/cm^2-eV$였다. 그리고 SEM의 단연 분석과 AES(Auger Electron Spectroscope)의 깊이 방향 분석을 통해서 매몰 알루미나층의 존재를 확인하였다. 알루미나는 실리콘 산화막보다 높은 열전도성을 가지므로 이를 매몰절연막으로 하여 SOI 구조를 제조하면 기존의 실리콘산화막을 매몰절연막으로 하는 SOI를 기판으로 하여 제조되는 소자보다 selg heating 효과가 감소된 우수한 특성의 소자를 제조할 수 있다.
We have fabricated an ordered Ni nanodot structure using an alumina mask prepared via 2-step anodization technique under phosphoric acid. We have formed a porous structure with average pore size of 279 nm on $2{\mu}m$ thick alumina film and the thermal deposition of thin Ni film though the mask led to the formation of ordered Ni nanodot structure with an average dot size of 293 nm, following the pore structure on the mask. We further investigated the magnetic properties of the nanodot structure by measuring the hysteresis curve at room temperature. When compared to the magnetic properties of a continuous Ni film, we observed the decrease in the squareness and the increase in coercivity along the magnetization easy axis, due to the isolated nanodot structure. Our study suggests that the ordered nanodot structure can be easiy fabricated with thin film deposition technique using anodized alumina mask as a mask.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.