• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.330-330
• /
• 2011

공기 중 산소를 이용한 다양한 산화반응에 적합한 이종상 촉매 개발이 공업적으로나, 학문적으로 중요한 의미를 갖는다. 우리는 수산화 인회석(hydroxyapatite, HAP)에 Ru이 도입된 새로운 이종상 촉매를 합성하였으며, 이를 이용하여 알콜 산화 반응을 통해 반응성을 관찰하였다. 우리는 다양한 형태의 결정구조와 표면구조를 가지는 HAP를 합성하였으며, 이를 AFM, ICP, XRD, SEM를 통하여 결정구조를 분석하였다. 각각에 대해서 수용액상에서 Ion exchange 반응을 통하여 Ru를 HAP 표면에 치환하여 여러 종류의 RuHAP를 합성하였다. 특히, 알콜 산화반응을 통해 HAP의 결정 형태에 따라서 반응성의 차이를 가짐을 알 수 있었다. HAP는 Molten salt synthesis 방법을 이용하여 합성한 일정한 형태의 단결정과 무정형의 다결정 즉, 두 가지 다른 형태를 이용하여 각각에 대해 칼슘이 부족한 형태로써, Ca과 Ru과의 Ion exchange 반응을 통해 다양한 종류의 HAP를 합성하여 알콜 산화반응의 촉매로서 가지는 반응성을 연구하였다.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.172-178
• /
• 2018

The sterilization rates were investigated to develop effective pretreatment methods of garlic and ginger using antimicrobial agents and blanching. Antibacterial components in chopped garlic and ginger, such as allicin, ginger, and shogaol, exhibited an antibacterial effect that reduced bacteria by a factor of $10^1(CFU/g)$. The total number of bacteria in garlic and ginger was decreased by $10^1(CFU/g)$ after individually soaking in 1% (w/w) citric acid, calcium oxide and 200 ppm sodium hypochlorite solution for 1 h, respectively. When chopped garlic and ginger were immersed in 1% (w/w) calcium oxide solution for 1 h, the bactericidal effect was increased by $10^4-fold$. Total cells with thermoduric bacteria exhibited a $10^3-10^4-fold$ reduction after heating for 30-40 s at $90-95^{\circ}C$. The combination of soaking in 200 ppm sodium hypochlorite solution and blanching at $95^{\circ}C$, 40 s showed $10^1-fold$ decrease in total number of cells compared to blanching in whole ginger.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.75-79
• /
• 2022

Fresh, washed ginseng can be contaminated with microorganism loads as high as 6.5 log CFU/g for total bacteria and 4.3 log CFU/g for mold. The goal of this study was to test eight antibacterial agents on ginseng. Immersing fresh ginseng washed in 1% (w/w) sodium citrate, sodium diacetate, sodium acetate, citric acid, and sodium lactate solution for 1 h resulted in a bactericidal effect of 31.0-97.5% for total bacteria. Among the organic acids, sodium citrate had the best antibacterial effect, with total bacteria reduced from 6.5 log to 4.9 log CFU/g. A 1% (w/w) vitamin B₁ lauryl sulfate solution with surfactant function by hydrophilic and hydrophobic sites can reduce 2.7 log CFU/g (99.8% inactivation) on total bacteria. In the 1% (w/w) calcium oxide solution, total bacteria were reduced by 3 log, showing an excellent inactivation effect of 99.9%. Calcium oxide is a highly useful material for inactivation of microorganisms in fresh ginseng.

• Journal of Plant Biotechnology
• /
• v.34 no.3
• /
• pp.213-221
• /
• 2007

The treatment of radish cotyledons with a nitric oxide (NO)-releasing substance, sodium nitroprusside (SNP) resulted in an increased adventitious root development in a dose-dependent manner. However, this NO-mediated enhancement effect was reversed when either 0.5 mM EGTA (an extracellular $Ca^{2+}$ chelator) or 0.1 mM $LaCl_3$ (a calcium channel blocker) was applied with $50\;{\mu}M$ SNP. Our results also showed that guaiacol peroxidase (GPX) and syringaldazine peroxidase (SPX) activities, which are known to play a key role in rooting, were more largely increased during adventitious root induction in the cotyledons treated with SNP. However, the treatment of cotyledons with SNP plus $LaCl_3$ inhibited the SNP-induced increases in the activities of both GPX and SPX. Trifluoperazine (TFP), an antagonist of calmodulin (a specific calcium-binding protein), also delayed adventitious root formation and significantly reduced the root length and number of the SNP-treated cotyledons as well as the deactivation of GPX and SPX enzymes. In conclusion, our results suggest that calcium is involved in the NO response leading to induction of adventitious root through a regulation of GPX and SPX.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.23-29
• /
• 2003

In this paper, effects of the acidification of ground and the chemical additive materials-ferric oxide, calcium chloride and calcium sulphate on the compressibility characteristics of the marine clay treated with quick lime were investigated. The rapid inflection point method was carried out. Results showed that the compression index of the untreated marine clay increased as the pH of pore water decreased. Also, the preconsolidation pressure, the coefficient of consolidation and the coefficient of permeability of the untreated marine clay decreased with pH of pore water. In the case of the marine clay treated with the quick lime-calcium chloride, the compression index decreased and the coefficient of consolidation and the coefficient of permeability increased. Specially, the preconsolidation pressure of sample treated with the quick lime-ferric oxide was higher than that of another samples.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.164.2-164.2
• /
• 2016

수산화인회석(Hydroxyapatite)는 뼈와 이빨의 무기물의 주성분으로서 칼슘과 인산염으로 구성된다. 본 연구에서는 특정 농도의 염기조건 (10 M NaOH)에서 수열합성법 (hydrothermal method)을 이용하여 수산 화인회석을 합성하였다. 합성된 샘플은 XRD 패턴 및 TEM 이미지 분석을 통하여 단결정성과 일정한 형태를 지닌 수산화인회석이 합성된 것을 확인하였다. 수산화인회석의 표면에 루테늄을 도입하기 위하여 이온교환 반응 과 열처리 과정을 이용하였다. 도입된 루테늄 나노 입자는 TEM 이미지 분석을 통하여 확인하였으며, 일차알콜과 이차알콜등의 유기 산화반응에 촉매로서 사용하였다.

• Geotechnical Engineering
• /
• v.2 no.3
• /
• pp.5-14
• /
• 1986

The results of stabilization process in silty.clays and sand-silts, which were, respectively, treated with Calcium hydroxide of the Calcium series and Aluminium Sulphate of the Aluminium series are follows. 1) In the former case used calcium hydrate and calcium cabonate for silty-clays, calcium aluminnium cabonate oxide hydrate and calcium carbonate for sandy-silts were produced 2) In the latter case used Aluminium Sulphate, by X-ray diffraction test, it was found that Aluminium Oxide was produced both in silty-clays and sandy-silts 3) As the results of stabilization process, in the former case, unconfined compression strength was increased greatly but in the latter case it was little increased.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.408-415
• /
• 1999

When a zinc-oxide eugenol type sealer was placed in root canals treated previously with calcium hydroxide, acceleration of its setting and the yellowish discoloration were observed clinically. The purpose of this study was to evaluate the properties of calcium hydroxide-eugenol compound. Some physical properties of calcium hydroxide-eugenol compound were compared with a manufactured zinc-oxide eugenol based root canal sealer, Tubli-seal$^{(R)}$ in terms of water solubility, water sorption, film thickness and microleakage. Solubility and water sorption were determined by the use of the method described in American Dental Association Specification(ADAS) no. 57. Ten samples of each material were prepared into disks 20mm in diameter and 1.5mm in thickness. The samples were immersed in 50ml of distilled water at $37{\pm}1^{\circ}C$ for 7 days. The samples were then removed and placed in a desiccator. The values for solubility and water sorption were calculated using differences between the weights of same sample. Film thickness was determined by the use of the method described in ADAS no. 57 too. A small quantity of mixed cement was placed between two glass plates of which thickness was measured previously. 15Kg loading was applied and total thickness of the glass plates and the cement film was measured. The thickness difference was recorded as the material's film thickness. Microleakage was determined with a dye penetration method. Experimental materials were placed between the dentin surface of bovine tooth and the acrylic rod. These units were immersed in Pelican ink (W-Germany) for three days. Dye-penetrated dentin surfaces of bovine tooth were measured using the NIB Image 1.60 Macintosh program. The results are as follows: 1. Water solubility value of calcium hydroxide-eugenol compound (20.98${\pm}$2.94%) was statistically higher than those of Tubli-seal$^{(R)}$(2.52${\pm}$0.49%)(p<0.05). 2. Water sorption value of calcium hydroxide-eugenol compound (59.72${\pm}$17.75%) was statistically higher than those of Tubli-seal$^{(R)}$(3.15${\pm}$0.76%)(p<0.05). 3. Film thickness value of calcium hydroxide-eugenol compound (0.36${\pm}$0.03mm) was statistically higher than those of Tubli-seal$^{(R)}$(0.12${\pm}$0.1mm)(p<0.05). 4. Dye penetration value after 3 days-immersion of calcium hydroxide-eugenol compound(57.63${\pm}$25.85%) was statistically higher than those of Tubli-seal$^{(R)}$(28.05${\pm}$23.46%)(p<0.05).

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.216-222
• /
• 2021

This is an experiment to complement new ways of using concentrated water discharged from the seawater desalination plant. In this study, metakaolin, which has excellent chloride ion immobilization effect, was used as the main binder, and 10% and 20% of calcium oxide were substituted with the activator. In addition, tap-water(TW) and reverse osmosis brine water(RW) were used as mixed water. As a result of the experiment, the mixture using RW showed higher compressive strength than TW. It also showed low water absorption and high density. In the mixture using RW as mixed water, a hydration reaction substance called Friedel's salt could be observed. Considering the corrosion problem of steel, RW is considered to be applicable to products such as non-reinforced concrete, brick, and curb stone. Through this study, it is thought that it is meaningful to propose a new application method other than the ocean release of RW.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.26-33
• /
• 2022

Molybdenum is widely used in many materials; thus, its recovery from ores and secondary resources has attracted considerable attention. In this study, the leaching of molybdenite ore using hydrochloric acid containing sodium chlorate as an oxidizing agent was studied. The effects of several variables, such as the concentrations of HCl and NaClO₃, reaction temperature and time, and pulp density, on the leaching of the ore were investigated. Under strong acidic and oxidizing conditions, the sulfide in the ore was dissolved as a sulfate ion, which formed gypsum with Ca(II), leading to a decrease in the leaching percentage of Mo(VI) from the ore. The leaching percentage of molybdenum was greater than 90%, while those of iron, calcium, and silicon were 38, 29, and 67%, respectively, under the optimum conditions: 2.0 M HCl, 0.5 M NaClO₃, pulp density of 5 g/L, temperature of 90 ℃, and treatment time of 60 min.