• Journal of Welding and Joining
• /
• v.1 no.2
• /
• pp.7-11
• /
• 1983

본 공장(진해화학주식회사)에서 암모니아는 나프타를 원료로 한 수소와 공기 중의 질소를 합성하여 제조된다. 암모니아 제조 공정 중 메탄가스(CH$_{4}$)와 수소가스(H$_{2}$) 중에 불순물로 존재하는 유화 수소(H$_{2}$S)를 제거시키는 공정이 탈황공정이다. 탈황공정은 산화 아연(ZnO)과 코발트-몰리브덴(Cobalt-Molybdenum) 촉매층에서 이루어지며 탈황공정이 이루어지는 용기를 탈황조(desulfurizer vessel)라 한다. 본 공장에 설치된 탈황조는 1966년에 설치되어 운용되어 왔다. 본 공장의 안전 조업을 위해 초음파 탐상법, 방사선 투과 탐상법, 표면 침투 탐상법으로써 탈황조의 노후도 측정을 행하였다. 탐상 결과 스테인레스 클래드의 모재부 용접선을 따라 균열이 발견되었다. 균열 부위를 깊이 연마하여 용접 결함부를 제거하고 다시 용접을 함으로써 본 탈황조를 연장하여 사용할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.201-201
• /
• 2010

DRAM (dynamic random access memory)은 하나의 트랜지스터와 하나의 캐패시터의 구조 (1T/1C)를 가지는 구조로써 빠른 동작 속도와 고집적에 용이하다. 하지만 고집적화를 위해서는 최소한의 캐패시터 용량 (30 fF/cell)을 충족시켜 주어야 한다. 이에 따라 캐패시터는 stack 혹은 deep trench 구조로 제작되어야 한다. 위와 같은 구조로 소자를 구현할 시 제작공정이 복잡해지고 캐패시터의 집적화에도 한계가 있다. 이러한 문제점을 보완하기 위해 1T-DRAM이 제안되었다. 1T-DRAM은 하나의 트랜지스터로 이루어져 있으며 SOI (silicon-on-insulator) 기판에서 나타나는 floating body effect를 이용하여 추가적인 캐패시터를 필요로 하지 않는다. 하지만 SOI 기판을 이용한 1T-DRAM은 비용측면에서 대량생산화를 시키기는데 어려움이 있으며, 3차원 적층구조로의 적용이 어렵다. 하지만 다결정 실리콘을 이용한 기판은 공정의 대면적화가 가능하고 비용적 측면에서 유리한 장점을 가지고 있으며, 적층구조로의 적용 또한 용이하다. 본 연구에서는 ELA (eximer laser annealing) 방법을 이용하여 비정질 실리콘을 결정화시킨 기판에서 1T-DRAM을 제작하였다. 하지만 다결정 실리콘은 단결정 실리콘에 비해 저항이 크기 때문에, 메모리 소자로서 동작하기 위해서는 높은 바이어스 조건이 필요하다. 게이트 산화막이 얇은 경우, 게이트 산화막의 열화로 인하여 소자의 오작동이 일어나게 되고 게이트 산화막이 두꺼울 경우에는 전력소모가 커지게 된다. 그러므로 메모리 소자로서 동작 할 수 있는 최적화된 게이트 산화막 두께가 필요하다. 제작된 소자는 KrF-248 nm 레이저로 결정화된 ELA 기판위에 게이트 산화막을 10 nm, 20 nm, 30 nm 로 나누어서 증착하여, 전기적 특성 및 메모리 특성을 평가하였다.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1047-1052
• /
• 1998

The porous alumina membrane was prepared from aluminum metal(99.8%) by anodic oxidation using DC power supply of constant current mode in aqueous solution of sulfuric, oxalic, phosphoric and chromic acid. Pore size and distribution, membrane thickness, morphology and crystal structure were examined with several anodizing conditions : reaction temperature, electrolyte concentration, current density and electrolyte type. It was found that ultrafiltration membrane was fabricated in electrolyte of sulfuric, and oxalic acid. On the other hand, microfiltration membrane was fabricated in electrolyte of phosphoric, and chromic acid. Also, it was shown that crystal structure of porous alumina membrane prepared in sulfuric, oxalic, and phosphoric acid was amorphous, whereas porous alumina membrane prepared in chromic acid had ${\gamma}$ type of crystal structure.

• Clean Technology
• /
• v.18 no.4
• /
• pp.446-450
• /
• 2012

Strong alkaline electrolyzed water which is produced in cathode by electrolyzing the solution where electrolytes (NaCl, $K_2CO_3$ etc.) are added in diaphragm electrolytic cell, is eco-friendly and has cleaning effects. So, it is viewed as a substitution of chemical cleaner. In addition, strong alkaline electrolyzed water is being used by some Japanese automobile and precision parts manufacturing industries. When strong alkaline electrolyzed water is produced by using diaphragm electrolytic cell, it is necessarily produced at the anode side. Since strong acidic electrolyzed water produced is discarded when its utilization cannot be found, production efficiency of electrolyzed water is consequently decreased. Also, there is a weakness electrolytic efficiency is decreasing due to the pollution of diaphragm. In order to overcome this, non-diaphragm all-in-one electrolytic cell integrated with electrode reaction chamber and dilution chamber was applied. Strong alkaline electrolyzed water was produced for different composition of electrolytes, and their properties and characteristics were identified. In comparing the properties between strong alkaline electrolyzed water produced in diaphragm electrolytic cell and that produced in all-in-one electrolytic cell, the differences in ORP and chlorine concentration were found. In emulsification test to confirm surface-active capability, similar results were obtained and strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell was identified to be useable as a cleaner like strong alkaline electrolyzed water produced in diaphragm electrolytic cell. Strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell is thought to have sterilizing power because it has active chlorine which is different from strong alkaline electrolyzed water produced in diaphragm electrolytic cell.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.474-481
• /
• 2018

The policy-making and technological development of eco-friendly automobiles designed to increase their supply is ongoing, but the internal combustion engine still accounts for approximately 95% of automobiles in use. To meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is increasing continuously. As diesel engines have high power and good fuel economy in addition to less CO2 emissions, their market share is increasing not only in commercial vehicles, but also in passenger cars. Because of the characteristics of the diesel combustion, however, NOx is generated in localized high-temperature combustion regions, and particulates are formed in the zones of diffusion combustion. LNT and urea-SCR catalysts have been developed for the after-treatment of exhaust gas to reduce NOx in diesel vehicles. This study examined the effect of a containing promoter on SCR catalysts to cope with the severe exhaust gas regulation. The de-NOx performance of the Mn-SCR catalyst was the best, and the de-NOx performance was improved as the ion exchange rate between Mn ion and Zeolyst was good and the activation energy was low. The de-NOx performance of the 7Cu-15Ba/78Zeoyst catalyst was 32% at $200^{\circ}C$ and 30% at $500^{\circ}C$, and showed the highest performance. The NOx storage material of BaO loaded as a promoter was well dispersed in the Cu-SCR catalyst and the additional de-NOx performance of BaO was affected by the reduction reaction of the Cu-SCR catalyst. Among the three catalysts, the 7Cu-15Ba/Zeolyst SCR catalyst was resistant to thermal degradation. The same type of CuO due to thermal degradation migrates and agglomerates because BaO reduces the agglomeration of the main catalyst CuO particles.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.6
• /
• pp.696-703
• /
• 1994

To utilize waste of squid effectively, antioxidant properities of squid viscera were elucidated. Major fatty acids of total lipid, neutral lipid and phospholipid were $C_{16:0},\;C_{18:1}\;and\;C_{20:5},\;C_{22:6}$ and consisted $63{\sim}71\%$ of total fatty acids. Total lipid did not show significant antioxidant activity when added to the fish oil at the concentration below $5.0\%$, Antioxidant activity of hexane extract was lower than total lipid or tetra carbon chloride-methanol($CCl_4-MeOH$) extract. Extracts with $CCl_4-MeOH$ exerted higher antioxidant activity as the methanol ratio was increased, suggesting that polar lipid plays and important role.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.957-964
• /
• 2010

The deactivated catalyzed diesel particulate filter-trap (DPF) was remanufactured by ultrasonic wave treatment with various prepared solutions, followed by active component re-impregnation, and the emission control performance and surface properties of remanufactured DPF were studied at various remanufacturing conditions. The proper ultrasonic wave cleaning time at various prepared solutions and optimal re-impregnation amounts of active component for the best emission control performance of DPF were investigated and its performance tests were also carried out with various temperatures for the conversions of CO, THC (total hydrocarbon) and PM (particulate matter) by catalytic reaction test unit using bypass gas from the diesel engine dynamo system. It was found that the emission control performance of DPF remanufactured with the high-temperature air washing, ultrasonic wave cleaning at acid/base solutions and active component re-impregnation method was recovered to 95% level of its activity compared to that of the fresh DPF, which was caused by removing the deactivating materials from the surface of the DPF, through the analyses of performance test and their surface characterization by Optical microscope, EDX, ICP, TGA, and porosimeter.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.209.1-209.1
• /
• 2015

Indium gallium zinc oxide (IGZO), indium zinc oxide (IZO) 그리고 zinc tin oxide (ZTO) 같은 zinc oxide 기반의 산화물 반도체는 높은 이동도, 투과도 그리고 유연성 같은 장점을 갖고 있어, display application의 backplane 소자로 적용되고 있다. 또한 최근에는 산화물 반도체를 이용한 thin-film transistor (TFT) 뿐만아니라 resistive random access memory (RRAM), flash memory 그리고 pH 센서 등 다양한 반도체 소자에 적용을 위한 연구가 활발히 진행 중이다. 그러나 zinc oxide 기반의 산화물 반도체의 전기 화학적 불안정성은 위와 같은 소자에 적용하는데 제약이 있다. 산화물 반도체의 안정성에 영향을 미치는 다양한 요인들 중 한 가지는, sputter 같은 plasma를 이용한 공정 진행 시 active layer가 plasma에 노출되면서 threshold voltage (Vth)가 급격하게 변화하는 plasma damage effect 이다. 급격한 Vth의 변화는 동작 전압의 불안정성을 가져옴과 동시에 누설전류를 증가시키는 결과를 초래 한다. 따라서 본 연구에서는, IGZO 기반의 TFT를 제작 후 plasma 분위기에 노출시켜, power와 노출 시간에 따른 전기적 특성 변화를 확인 하였다. 또한, thermal annealing을 적용하여 열처리 온도와 시간에 따른 Vth의 회복특성을 조사 하였다. 이러한 결과는 추후 산화물 반도체를 이용한 다양한 소자 설계 시 유용할 것으로 기대된다.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.942-950
• /
• 1997

NiAI기 산화물 분산강화(Oxide Dispersion Strengthende:ODS)합금을 기계적 합금화 (Mechanical Alloying: MA)방법으로 제조하였으며, 열간압축방법으로 성형하였다. 연이어 단순항온처리에 의한 정상결정립성장과 특성조건에서의 thermomechanical treatment 에 의한 이차재결정화를 유도하였다. 결정립 조대화된 ODSD MA NiAI의 creep 성질 및 이에 조대화된 미세조직은 creep 성질이 저하된 반면, 이차재결정화된 MA NiAI의 creep성질은 크게 향상되었다. 이 creep 성질의 향상은 이차재결정화의 특성인 급격한 결정립의 조대화, 분산상의 성장억제 및 grain aspect ratio의 증가에 기인한 것으로 사료되었다. 이차재결정화된 ODS MA NiAI의 creep또는 glide controlled dislocation creep임을 제시하지만, 전체 creep속도가 결정립 크기 및 grain aspect ratio의 영향을 크게 받은 것을 볼 때, 결정립계 미끄럼기구가 주 creep 기구와 조합되어 MA NiAI의 전체 creep기구에 영향을 준 것으로 추정할 수 있었다.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.11-18
• /
• 2015

As the seriousness of water pollution resulted from nitrogen is being magnified, research has been conducted to reduce nitrogen in sewage as well as wastewater. Particularly research on innovative nitrogen removal methods that are based on the reaction of nitritation and are economically feasible and eco-friendly has been receiving attention. However, research on the applicability and efficiency of the methods based on the reaction of nitritation has not been completely done yet. Accordingly, the current study has analyzed the characteristics of sewage flowing into municipal wastewater treatment plants, primary clarifier supernatant, recycled water, and livestock wastewater and also operated a laboratory-level reactor. The result shows that recycled water and livestock wastewater contain higher-concentration nitrogen than other kinds of sewage, so they increase nitrogen loading in the water treatment line. And the result of operating a reactor shows that because of ammonium nitrogen low concentration, sewage and primary clarifier supernatant do not induce the reaction of nitritation. Also, there exist differences in the conditions of retention time inducing the reaction of nitritation by the types of sewage, and this seems to be attributed to organic compound and ammonium nitrogen concentration. Among the kinds of sewage inducing the reaction of nitritation, anaerobic digester supernatant indicates the highest efficiency.