• Title/Summary/Keyword: 산화조

Search Result 657, Processing Time 0.028 seconds

The test-bed construction and water purification assessment of the eco-convergence type aerated string contacted oxidation system (생태융합형 접촉산화수로 Test-Bed 구축 및 정화효율 평가)

  • Choi, Sunhwa;Lee, Seung-Heon;Jang, Kyusang;Kim, Heungseop
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.592-592
    • /
    • 2016
  • 국내에는 17,500여개의 농업용 저수지가 전국적으로 분포하고 있다. 국내 농업용 저수지는 대부분이 소규모이며, 연중 수량 변동이 심하고, 유역배율이 작아 태생적으로 수질오염에 취약한 구조로 되어 있다. 특히 농업용 저수지는 도시 근교나 농촌지역에 많이 위치하고 있어 유역 내 축산 농가나 미처리 생활하수에서 유래된 유기물 및 영양염류 유입에 의한 수질오염도가 높다. 저수지에 고농도로 유입되는 유기물, TN, TP를 처리하기 위하여 농어촌연구원과 수생태복원(주)에서는 공동으로 친환경 수처리시설인 생태융합형 접촉산화시스템을 개발하였다. 생태융합 접촉산화수로는 상부 식생과 수로 내의 섬유상 끈상 미생물 접촉재를 이용하여 오염수가 수로를 흐르면서 침전, 여과, 흡착, 산화, 흡수 등 물리학적, 화학적, 생물학적 원리를 이용하여 고농도의 유기물과 질소, 인을 제거하는 물리적, 생물학적 공정을 융복합 기술이다. 본 연구에서는 경기도 시흥시에 소재하고 있는 M 저수지에 현장 Test-bed를 구축하여 수질정화효율을 평가하였다. M 저수지는 유효저수지량이 약 23만톤에 해당하는 소규모 저수지로, 1941년도 준공된 아주 노후화된 저수지로 평균 수심이 2m 이하이고 연중 수질오염도가 높은 저수지이다. 매화저수지 수변에 설치된 생태융합형 접촉산화수로의 전체규모는 길이 8.6m, 폭 2m, 수심 2m에 해당하며, 끈상 미생물 메디아조 3개($2{\times}2{\times}6m^3$), 침전조 1개($2{\times}2{\times}2m^3$)로 구성되어 있다. 기타 부대 장치로는 끈상 메디아조에 산소공급을 위한 Air-mist(마이크로 버블 발생장치), 자동운전계기판, 유입펌프 등이 있다. 생태융합형 접촉산화수로의 처리 공정은 유입수${\rightarrow}$에어미스트${\rightarrow}$고속복합응집장치${\rightarrow}$융복합 산화조(3조)${\rightarrow}$침전조${\rightarrow}$방류로 구성되어 있다. 테스트 베드는 2015년 8월 말경에 구축 완료하였으며, 끈상 미생물 메디아조의 수질정화효율을 평가하기 위하여 9월부터 11월까지 총 7회 걸쳐 유입수와 유출수를 각각 조사하였다. 현장 측정항목인 수온, pH, EC, DO 등은 유입수 및 유출수간 큰 차이가 없었고, COD, SS, Chl-a, TP 등은 수처리시스템 초기 가동시에는 메디아에 미생물 부착율 저조로 유입수 및 유출수 수질농도에 큰 차이가 없었으나, 운영시간의 경과와 함께 메디아의 미생물 충진율이 높아짐에 따라 처리효율이 최대 SS 69.6%, Chl-a 89.3%, TP 89%까지 도달하는 것으로 나타났다. 생태융합 접촉산화수로는 부지 집약적인 컴팩트한 수처리 시설로서 현재 널리 이용되고 있는 인공습지를 대체할 수 있는 경제적인 시설로 판단된다.

  • PDF

산화제 배관과 연료탱크 사이의 공기층 단열에 의한 연료탱크 온도분포 예측

  • 권오성;하성업;조남경;조인현;나한비;길경섭;김병훈
    • Bulletin of the Korean Space Science Society
    • /
    • 2004.04a
    • /
    • pp.71-71
    • /
    • 2004
  • KSLV-I 추진기관 기체공급계는 상부의 산화제 탱크로부터 나온 산화제 주배관이 하부의 연료탱크를 관통하여 엔진공급계로 이어지도록 구성되어 있다. 연료탱크에는 산화제 배관의 관통을 위한 tunnel이 구성되어 있으며 배관과 tunnel은 일정한 간격을 유지하게 된다. 배관과 연료탱크 사이의 열전달을 줄이기 위하여 산화제 배관에 단열재를 적용할 수 있으나, 이 경우 배관의 운송, 조립시에 handling이 힘들게 되고, 특히 발사체에 조립된 후에 발생하는 단열재의 파손 및 성능감소에 대한 유지보수가 불가능하다. (중략)

  • PDF

Development of three-dimensional thermal oxidation simulator (3차원 산화 시뮬레이터 개발)

  • 이제희;윤상호;광태영
    • Journal of the Korean Institute of Telematics and Electronics D
    • /
    • v.34D no.2
    • /
    • pp.38-45
    • /
    • 1997
  • In this paper, the three-dimensional stress effect of thermal oxide is simulated. We developed a three-dimensional finite element numerical simulator including three-dimensional adaptive mesh generator that is able to refine and eliminate nearby moving boundary of oxide, and oxidation solver with stress model. To investigate the behavior of thermal oxidation the simulations of thermal oxidation for island and hole structures are carried out assuming silicon wafer of <100> direction, temperature of $1000^{\circ}C$, oxidation time of 60min, wet ambient, initial oxide thickness of $300\AA$, and nitride thickness of $2, 000\AA$. The main effect of deformation at the corner area of oxide is due to distribution of oxidant, but the deformation of oxide is affected by the stressin theoxide. In the island structure which is the structure mostly covered with nitride and a coner is opended to oxidation, oxidation is reduced at the coner by compressive stress. In the hole structure which is the structure mostly opedned to oxide and a coner is convered with nitride, however, oxidation is increased at the coner by tensile stress.

  • PDF

Influence of Ammonia and Dissolved Oxygen Concentrations on Nitrite Accumulation in a MBR (MBR 반응조에서 아질산염 축적에 미치는 암모니아와 용존산소 농도의 영향 연구)

  • Choi, In-Su;Wiesmann, Udo
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.29 no.8
    • /
    • pp.922-929
    • /
    • 2007
  • The complete oxidation of ammonia to nitrate is a distinctive two-step process divided into the oxidation of ammonia to nitrite(nitritation) by Nitrosomonas and the oxidation of nitrite to nitrate(nitratation) by Nitrobacter. The nitrogen removal via nitrite accumulation offers several advantages such as saving costs for aeration, saving carbon source and finally reduction of sludge discharge. In this work a suspended bioreactor coupled with membrane filtration(MBR) was used to find the process conditions of nitrite build-up. The MBR enables to reach sufficient nitrifying bacteria in the bioreactor, although the autotrophic bacteria can be easily washed out due to their lower growth rate. The dissolved oxygen concentration $c'_{O2}$ and ammonia concentration $c_{NH3}$ in the reactor were varied and investigated as parameters for nitrite accumulation. As a result the higher ammonia concentration in the reactor is very effective for starting nitrite build-up and the effect was strengthened in combination with lower dissolved oxygen concentration. With lower $c'_{O2}<0.3$ $mgL^{-1}$ $O_2$ and high $c_{NH3}=6.3\sim14.9$ $mgL^{-1}$ $NH_3N$ the 74% of the nitrite accumulation was achieved. Specially, it was found that the nitrite accumulation could occur not only in biofilm reactor as many references showed but also in the membrane bioreactor carried out in this study.

Changes of Nitrifying Bacterial Populations in Anaerobic-Anoxic-Oxic Reactors (혐기-무산소-호기 반응조내 질화세균군의 변화)

  • Park, Jong-Woong;Lee, Young-Ok;Go, Jun-Heok;Ra, Won-Sik;Lim, Uk-Min;Park, Ji-Eun
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.2
    • /
    • pp.138-144
    • /
    • 2005
  • This study was carried out to investigate the changes of nitrifying bacterial populations including Nitrosomonas sp. and Nitrobacter sp. in $A^2/O$ pilot plant with the configuration of anaerobic-anoxic-oxic reactors. The suspended nitrifying bacterial populations in mixed liquor and those of attached populations on granular carrier surface made by molded waste tire were analyzed by Fluorescent in situ Hybridization(FISH) method. The nitrification rate of a pilot plant showed the value of $1.97{\sim}2.98\;mg\;N/g$ MLVSS hr. The ratios of suspended ammonia oxidizer including Nitrosomonas sp. (NSO) to total bacteria in each reactor were oxic < anoxic < anaerobic. On the contrary, the ratios of suspended nitrite oxidizer including Nitrobacter sp. (NIT) were anaerobic < anoxic < oxic. The thickness, dry density and mass of the attached biomass on granular carriers were $180{\sim}188\;{\mu}m$, $38.5{\sim}43.9\;mg/cm^3$, $29.4{\sim}32.5\;mg/g$, respectively. Also, the ratios of attached nitrifier to total bacteria on granular carriers were similar regardless of ammonia/nitrite-oxidizer (NSO; 3.2%, NIT; 2.8%) and very low compared to those(NSO; $22.8{\sim}28.4%$, NIT; $17{\sim}26%$) of suspended nitrifier.

Effects of Water Activity and Light on the Oxidation of Carrot Carotenoids (당근 카로티노이드의 자동산화에 미치는 수분활성도 및 광선의 영향)

  • Song, Eun-Seung;Kim, Hae-Gyoung;Song, Yeong-Ok;Jeon, Yeong-Soo;Cheieh, Hong-Sik
    • Korean Journal of Food Science and Technology
    • /
    • v.25 no.6
    • /
    • pp.775-779
    • /
    • 1993
  • The effects of water activity and light on the oxidation of carotenoid were studied using both the model systems of carrot lipids and freeze dried carrot. Autoxidation of crude lipids from the freeze dried carrot and the stability of carotenoids in controlled systems varing water activities and/or lights were examined. The degree of autoxidation of crude lipid stored at $30^{\circ}C$ for 16 days was significant(p< 0.05) and 71.8% destruction of carotenoid in the crude lipids were observed. When the powdered solid models of freeze dried carrot were stored at $30^{\circ}C$ for 35 days under various water activities and the presence of light, the maximum stability of carotenoid was found at $a_{w}$ 0.42 and the damaging effect of lights on the stability of carotenoid was significant (p<0.05). The absoprtion spectra of carotenoids changed according to the degree of oxidation, but shifts of the maximum wavelength was not observed.

  • PDF

모의 금속전환체 U-1wt%Nb 합금의 공기중 산화거동

  • 이은표;주준식;유길성;조일제;국동학;김호동
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2004.06a
    • /
    • pp.355-355
    • /
    • 2004
  • 사용후핵연료 금속전환체는 세라믹형 사용후핵연료를 리튬용융염으로 금속전환하여 생성한 우라늄금속으로 상온에서도 표면산화가 진행될 정도로 매우 불안정한 상태이다. 이에 대한 저장 안정성 향상방안을 도출하기 위해 금속전환체의 주성분인 금속우라늄과 산화 안정화물질인 Nb을 첨가한 모의 금속전환체 합금을 제작하여 $200^{\circ}C~300^{\circ}C$ 온도구간에서 열중량분석기(TGA)를 이용해 순수 산소분위기로 산화시험을 수행하였다.(중략)

  • PDF

Electrical Properties of MOS Capacitors Irradiated with $CO^{60}-\gamma$ Ray ($CO^{60}-\gamma$선이 조사된 MOS Capacitors에서의 전기적 특성)

  • 권순석;박흥우;임기조;류부형;강성화
    • Journal of the Korean Vacuum Society
    • /
    • v.4 no.4
    • /
    • pp.402-406
    • /
    • 1995
  • MOS(금속 산화막 반도체 접합) 소자가 방사선에 노출되면, 산화막재에 양의 공간전하가 생성되고 Si-SiO2 계면에 계면준위가 생성된다. MOS 커패시터의 방사선 조사효과를 방사선 피폭량과 산화막의 두께를 달리하는 시편에서 정전용량과 전류변화를 측정하여 고찰하였다. 정전용량-바이어스 전압 특성 실험결과로부터 플렛밴드 전압 및 계면상태밀도를 계산하였다. 또한 전압-전류 특성은 방사선 조사로 산화막내에 생성된 양의 공간전하와 Si-SiO2 계면에 포획된 전하에 의해서 설명이 가능하였다.

  • PDF

Wastewater Treatment Eco-pond by Using Energy Circulation System (에너지 순환시스템을 이용한 생태연못의 수질개선)

  • Kim, Min-Young;No, Hwang-Won;Lee, Seung-Yoon;Jee, Hong-Kee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2008.05a
    • /
    • pp.2127-2131
    • /
    • 2008
  • 본 연구는 자연생태하에서 지속가능한 태양에너지와 생태계작용에 의한 수질개선기법을 개발하기 위하여 생태연못을 설치하여 수질부하가 발생함에 따라 생태연못에 에너지를 순환시켜 생태적 수질정화 기능을 강화하는데 목적을 두었다. 본 연구에서 생태연못(Eco-Pond) 시스템의 수질개선 원리는 수중(유입수)의 침전, 유기산 생성, 메탄 발효, 호기성 산화, 광합성 산소배출 및 병원균 제거 등을 촉진시키기 위한 목적으로 축산농가 및 마을단위의 축산 및 생활하수 유입부에서 생태연못을 두어 수질을 개선하는 공법 즉, 산화조(Oxidation Pond)에 SolaBee 시스템을 결합한 모델을 제안하였다. 에너지 순환장치를 이용한 수질개선 방안으로는 태양열 연못 내에 물순환장치를 만들어 수체를 효율적으로 순환시키고 공기를 혼합시켜 부영양화가 진행되는 연못이 수질을 자연친화적으로 개선시키도록 하였다. 따라서 연구결과 태양에너지는 다른 자연에너지(풍력 등)에 비해서 에너지 밀도는 낮지만 지역의존성이 적고 그 양이 방대하여 21세기 중요한 에너지원으로 사용가능성을 확인할 수 있었다. 본 연구에서 제시된 에너지 순환구조를 가진 생태연못 시스템은 우리나라 중소규모의 농촌 및 축산농가에 보급 될 수 있는 수질개선 시스템이다.

  • PDF

균일막 형성을 위한 항공기 부품용 타이타늄의 양극산화 최적 공정

  • Lee, Da-Yeong;Han, A-Yeong;Jeong, Na-Gyeom;Choe, Jin-Seop
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2018.06a
    • /
    • pp.66.2-66.2
    • /
    • 2018
  • 금속의 양극산화 공정(anodizing)은 전해질 내 금속에 인위적으로 전위를 가해 금속 표면에 얇은 산화막(oxide layer)을 형성하여 금속의 내식성, 내마모성을 증가시키는 공정이다. 타이타늄은 가볍고 단단하여 산업분야에 유용하게 사용되며 이와 같은 양극산화 공정을 통해 내식성, 내마모성을 크게 높일 수 있다. 본 연구에서는 항공기 부품용 타이타늄의 최적 양극산화 조건을 찾기 위해 전압의 파형, 전해액의 조성에 따라 양극산화 실험을 진행하였다. SEM, AFM, EDS, 분광측색계, 색채색차계 등을 이용하여 각 조건에 해당하는 타이타늄의 산화막($Tio_2$)의 두께, crack 형태, pore 형태, 균일도, 표면 조도, 내전압, 색 수치를 분석하였다. 그 결과 전압 DC 140 V, 주성분이 KOH $Na_3PO_4{\cdot}12H_2O$인 전해액으로 이루어진 양극산화 조건에서 가장 균일하고 색 재현성이 우수한 타이타늄의 산화막($Tio_2$)을 형성하였다.

  • PDF