• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.2
• /
• pp.8-14
• /
• 2011

In this paper, the combustion characteristics of hybrid rocket fuel with tapered grain port were investigated experimentally. The charging efficiency of convergent and divergent port shape fuel with $1^{\circ}$ taper angle was 6.8% higher than that of cylindrical port shape fuel. The regression rate was increased about 17.5% by using the convergent port shape fuel. On the other hand, in case of divergent port shape fuel, no notable difference of regression rate was observed when compared to that of the cylindrical port shape fuel. In the case of convergent port shape fuel, characteristic velocity and its efficiency were notably increased with respect to cylindrical port fuel. It was found that convergent port shape of hybrid rocket fuel can lead to a better option compared to the conventional cylindrical port in terms of combustion efficiency and performance improvement.

• Aerospace Engineering and Technology
• /
• v.12 no.1
• /
• pp.200-206
• /
• 2013

A performance sensitivity of liquid rocket engine to propellant density or supply pressure change was studied. The analysis program was verified to have 1% error comparing with the measured data of a turbopump-gas generator system. The engine combustion pressure decreases as fuel supply pressure increases due to decreased mixture ratio which reduces the turbine power. The engine combustion pressure increases as fuel density increases because the total propellant flow rate is increased substantially even though mixture ratio is slightly decreased. The engine combustion pressure increases when the oxidizer density or supply pressure increases.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.4
• /
• pp.82-91
• /
• 2003

Experiments to investigate the mixing performance of unlike doublet impinging jets are conducted. Reynolds number of simulants used in this study rages from 1.0 to 1.5 Cold flow test is performed to investigate the hydrodynamic effect and spray of the impinging jets are collected locally and calculated by using Rupe's mixing efficiency equation. Momentum exchanges and relative velocity ratio between two jets are taken as the main parameter to represent the effect of enlargement of the orifice diameter. As diameter ratio increases, the corresponding momentum ratio where maximum mixing efficiency occurs and relative velocity at the maximum mixing efficiency ranges 0.6 to 0.7, respectively. Penetration depth can be taken as a prominent parameter to estimate the mixing efficiency.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.4
• /
• pp.443-448
• /
• 2010

In this paper, the changes in performance parameters, e.g., the combustor pressure, turbine power, engine mixture ratio, temperature of gas generator, and product gas, of a liquid rocket engine employing gas generator cycle with the variations in propellant-supply pressure have been described. Engine performance is numerically calculated using the 13 major system-level variables of the rocket engine. The combustor pressure and turbine power increase with an increase in the oxidizer-supply pressure and decrease with an increase in fuel-supply pressure. The lower mixture ratio of gas generator for increased fuel mass flow rate decreases the gas generator gas temperature and deteriorates the gas material properties as the turbine working fluid. The turbine power decreases with an increase in fuel-supply pressure; this results in a decrease in the main-combustor pressure, which is directly proportional to engine thrust.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.386-388
• /
• 2009

차세대 에너지로 연료전지가 각광을 받고 있는 현재, 세계 각국에서는 연료전지의 상용화를 위해 노력하고 있다. 그러나 촉매분야에서 백금계 촉매의 사용량의 문제에 따른 매장량 한계점과 귀금속이라는 문제점이 존재하기 때문에 이에 대하여 대책강구가 필요한 시점이다. 이에 백금 촉매의 활성을 증대하고자 나노 크기의 제어 연구가 진행되고 있다. 또한, 촉매의 구조적인 면에 따라 촉매의 활성이 달라지는 점을 착안하여 백금계의 나노 형상 조절 연구와 백금계 촉매를 대체할 비백금계의 촉매 개발 연구가 활발히 진행되어지고 있다. 이에 본 연구는 백금계 촉매 중 Pd을 polyol process에 의한 나노 형상 조절을 통하여 단위 질량당(or 단위 부피당) 촉매의 활성을 높이고자 하였다. Polyol process에서는 환원제, 계면활성제, 온도, 시간, 기타 첨가제에 따라 나노 형상이 다르게 조절되는데, 이에 계면활성제로 PVP를 사용하고, 반응속도 및 형상조절을 위해 다양한 첨가제를 이용하여 polygonal Pd NPs을 형성하였다. 본 나노 형상 조절에서는 첨가제와 온도가 가장 큰 영향을 미치는 요인으로 착안하여 그에 따른 polygoanl Pd NPs의 사이즈 조절을 통해 전기화학 특성이 차이의 연구에 중점을 두었다. 이에 따라 나노 형상 조절이 된 Pd촉매를 이용하여 상용화된 촉매(Pd/C(XC-72R))에 비하여 전기화학적인 특성의 차이와 Pd 촉매의 촉매적 특성의 효과를 보고자 한다.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.309-316
• /
• 1999

A numerical study for the turbulent reacting flow in an orimulsion gasifier has been carried out to analyze the characteristics of chemical reaction by orimulsion droplets. In this study, our interest has been focused on the effect of oxidizer to orimulsion ratio, which is one of the key parameters of gasification operation, as well as on the distribution of chemical species. In addition, we have conducted numerical calculations to understand the effect of droplet size, spray angle and injection velocity of fuel so as to acquire the basic information on the operating range of orimulsion gasifier. The result of numerical calculations showed that the gas composition of CO and H$_2$concentrations was the highest when the oxidizer to orimulsion ratio was about 0.88 and the reactivity of orimulsion increased as the droplet size reduced with proper spray angle. Also, we have carried out the analysis on the orimulsion gasification in the 100 ton/day-scale gasifier based upon the prior study in order to obtain the basic data for the proper operating condition using orimulsion feed.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.44-50
• /
• 1999

For the prediction of combustion performance of the Unlike Impinging Quadlet Injector (OOOF type), mixing efficiency, mixing characteristic velocity, and efficiency of mixing characteristic velocity were obtained from the cold test. Water/kerosene were used for simulants, The momentum ratio of oxidizer and fuel were mixing correlating parameter. Orifice discharge coefficient, spray pattern and mass distribution were measured. As a result, invasion-depth had strong effect on mixing efficiency, mixing characteristic velocity, and efficiency of mixing characteristic velocity. Mixing efficiency and efficiency of mixing characteristic velocity showed maximum value for momentum ratio 1.67(TMR = 2.5), and fuel rich state showed larger decreasing ratio than oxidizer rich state.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.803-810
• /
• 2017

the liquid oxygen transitions to a supercritical state, causing rapid changes in properties and pseudo boiling in supercritical combustion. the combustion reaction operating in a supercritical state depends on the turbulence diffusion caused by difference of density, therefore, a study of the diffusion flow and pseudo boiling is required. Many researchers have studied these phenomena in the supercritical combustion, but A case study by various variables is inadequate. In this study, the flow field and flame structure were investigated numerically by changing the recirculation flow and liquid oxygen core length through oxygen-fuel ratio(O/F), combustor diameter and recess ratio at supercritical pressure condition.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.591-596
• /
• 2019

A recently developed propellant, ammonium dinitramide (ADN, $NH_4N(NO_2)_2$ is stable and safe at an ambient condition. However, it requires high purity for practical applications. A very little quantity of foreign impurities in ADN may cause clogging of thruster nozzles and catalyst poisoning for the use of a liquid propellant. Thus, several purification processes for precipitated ADN particles such as repetition extraction, activated carbon adsorption and low-temperature extraction were presented in this study. The purifying methods helped to improve the chemical purity as evaluated by FT-IR and UV-Vis spectroscopy in addition to ion chromatography (IC) analyses. Among the purification processes, adsorption was found to be the best, showing a final purity of 99.8% based on relative quantification by IC. Thermal analysis revealed an exothermic temperature of $148^{\circ}C$ for the synthesized liquid monopropellant, but rose to $188^{\circ}C$ when urea was added.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.869-872
• /
• 2011

Ignition tests of an oxidizer rich preburner for a staged combustion cycle liquid rocket engine were performed to evaluate combustion performance. Design operation conditions of the tested oxidizer rich preburner are about 60 of OF ratio and 20 MPa of combustion pressure. The entire kerosene and some LOx injected into the mixing head is burned in combustion chamber and the remaining LOx injected through center holes of combustion chamber is vaporized. Full flow ignition method with hypergolic fuel was used. Each propellant was supplied in two stages for soft ignition. Test results, low frequency oscillation was occurred in low flow rate conditions under 45% of design flow rate. Stable ignition in the course of design combustion pressure was able to induce by minimization of low flow rate ignition region to escape low frequency oscillation.