• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.147-147
• /
• 2003

탄소/탄소 복합체의 내산화 코팅을 위하여 산화티탄, 산화알루미늄, 산화이트륨 등을 포함하는 여러 가지 인산염계 유리를 제조하였다. 유리 산화물조성 몰비는 인산에 대하여 인산알루미늄을 15몰%, 30몰%, 45몰%로 하였고 산화티탄은 70몰%, 산화 이트륨은 25몰%이 되도록 코팅 액을 제조하였다. 제조 된 코팅액은 석영 도가니에서 열처리 하여 급냉 시켰으며, 급냉 시키고 다시 130$0^{\circ}C$, 1시간 동안 열처리하여 유리를 제조하였다. 제조된 유리의 열중량, 열팽창율, 열전도도를 분석하여 탄소 복합체와의 적합성을 조사하고, 내산화성 시험을 위해 탄소/탄소 복합체에 코팅액을 도포하여 산화 감량 비율을 측정하였다. 엑스선 회절분석기와 적외선 분광기를 통하여 인산염 유리의 구조분석을 실시하고 비커스 미세 경도 시험기를 이용하여 기계적 물성을 측정하였다.

• Electrical & Electronic Materials
• /
• v.33 no.3
• /
• pp.31-41
• /
• 2020

• Journal of the Korean Chemical Society
• /
• v.28 no.4
• /
• pp.231-237
• /
• 1984

The x-values in the nonstoichiometric chemical formulas $YO_{1.5+x}\;and\;HoO_{1.5+x}$, have been measured in the temperature range from 700$^{\circ}$C to 1000$^{\circ}$C under oxygen pressures from $2{\times}l0^{-1}\;to\;1{\times}10^{-6}$ atm by gravimetric method. The observed x-values increase with increasing temperature and oxygen pressure. The enthalpies of formation of excess oxygen in yttrium oxide and holmium oxide decrease with decreasing oxygen pressure and are all positive values representing an endothermic process. The 1/n values calculated from the slopes of the plots of log x vs. log $P_{O2}$ increase with temperature and are positive values which means the higher oxygen pressure dependence at higher temperature. We have examined the nonstoichiometric defect and conduction mechanism from x-values and thermodynamic data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.9
• /
• pp.789-799
• /
• 2012

In this research, a high temperature superconducting(HTS) motor is designed which is adequate for an electrical aircraft by generating high power density and the potentiality of its application to an aircraft is studied. The designed motor is based on YBCO plates, HTS coils composed of Bi-2223, and ironless air cooled resistive armature. The HTS motor is designed to generate power equivalent to O-360 engine with 180HP at 2700RPM which is used for Cessna and equivalent to CFM56 engine with 18000HP at 5000RPM which is used for B-737. Also, power densities of HTS motors are compared with power densities of aircraft engines so that we can estimate the potentiality of the HTS motor as an aircraft engine.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.447-452
• /
• 2003

We had clarified the reactions of the rare earth oxides($RE_2O_3$) with lithium oxide produced in lithium reduction process of oxide fuels. Oxides of scandium, yttrium, praseodymium, neodymium, samarium, europium, gadolinium, ytterbium and lutetium reacted with lithium oxide in the higher concentration than the respective certain critical concentration of lithium oxide and formed complex oxides($LiREO_2$). The critical lithium oxide concentrations for the formation of complex oxides of scandium, yttrium, praseodymium, neodymium, samarium, europium, gadolinium, ytterbium and lutetium oxide were respectively 0.1 wt%, 1.9 wt%, 5.3 wt%, 5.0 wt%, 3.0 wt%, 3.9 wt% 2.9 wt%, 2.6 wt% and 0.3 wt%. Cerium and lanthanum oxide did not react with lithium oxide. These complex oxides obtained from experiments have limited solubility in lithium chloride at $650^{\circ}C$.

• Journal of the Korean Chemical Society
• /
• v.28 no.3
• /
• pp.149-154
• /
• 1984

The electrical conductivity of p-type yttrium sesquioxide has been measured as a function of temperature and of oxygen partial pressure at temperatures from 650 to 1050$^{\circ}C$C and oxygen partial pressures from $1 {\times}10^{-5}\;to\;2{\times}10^{-1}$atm. Plots of log conductivity vs. 1/T at constant oxygen partial pressures are found to be linear with low-and high-temperature dependences of conductivity. The high-temperature dependence of conductivity shows two different defect structures. The plots of log conductivity vs. log $Po_2$ are found to be linear at $Po_2$'s of $10^{-5}\;to\;10^{-1}$ atm. The electrical conductivity dependences on $Po_2$ are found to be ${{\sigma}{\propto}Po_2}^{1/6}$at $850{\sim}950^{\circ}C,\;{{\sigma}{\propto}Po_2}^{3/16}$ at $950{\sim}1050^{\circ}C\;and\;{{\sigma}{\propto}Po_2}^{1/7.5}{\sim}{{\sigma}{\propto}Po_2}^{1/8.3}\;at\;650{\sim}800^{\circ}C$, respectively. The defect structures are$O_i{''}$ at $850{\sim}950^{\circ}C$ and $V_M{'''}$ at $950{\sim}1050^{\circ}C$. The electron hole is main carrier type, however, ionic contribution is found at lower temperature portion.

• Journal of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.27-32
• /
• 1986

Electrical conductivities of NiO-$Y_2O_3$ systems containing 0.8, 1.6, and 3.2 mol% NiO have been measured in the temperature range of 400 to 1100$^{\circ}$C at $PO_2$'s of 1 ${\times}10^{-5}$ to 2 ${\times}10^{-1}$ atm. Plots of $log\sigma$ vs 1/T at constant $PO_2$'s are found to be linear with an inflection at temperature around 650$^{\circ}$C. The slopes are steeper in the high temperature region above 650$^{\circ}$C than in the low temperature region below 650$^{\circ}$C. The average activation energies are 41.8kcal/mol in the high temperature region and 12.5kcal/mol in the low temperature region. $PO_2$'s dependence value, 1/n, is 1/5.1~1/5.4 in the high temperature region and 1/5.9~1/6.2 in the low temperature region. The NiO-$Y_2O_3$ systems are found to be an electronic p-type semiconductor. The predominant defects in the systems are believed to be triply ionized yttrium vacancy in the high temperature region and doubly ionized oxygen interstitial in the low temperature region. Ionic contribution to the total conductivity is found from ${\sigma}^{\propto}PO_2$ in the temperatures below 650$^{\circ}$C.

• Transactions of the Korean hydrogen and new energy society
• /
• v.14 no.3
• /
• pp.258-267
• /
• 2003

A new kind of oxygen carrier material is tested for chemical-looping combustion. NiO, CoO, $Fe_2O_3$ is chosen as metal oxide and YSZ as a binder. Hydrogen fuel is reacted with metal oxide (reduction of metal oxide) and then the reduced metal is successively oxidized by air. Dissolution method is examined to prepare the oxygen carriers. The effects of reaction temperature are measured by a TGA, mechanical strength and regenerability after 10 cycle are examined. $Fe_2O_3/YSZ$ oxygen carrier is bested in mechanical strength and we consider that NiO/YSZ after 3rd cycle are good oxygen carrier in according to reactor design.

• Journal of Powder Materials
• /
• v.18 no.1
• /
• pp.73-77
• /
• 2011

$Y(OH)_3$ nanowires were synthesized by a hydrothermal reaction of metallic Y with aqueous solution of LiOH. The morphology and the size of the nanowires changed with varying the volume of the LiOH solution inside the autoclave. $Y(OH)_3$ nanowires transformed to $Y_2O_3$ by a subsequent heat-treatment without morphological change. By a proper control of hydrothermal reaction parameter and heat-treatment, the yield of pure $Y_2O_3$ nanowires up to 97% was attained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.5-16
• /
• 1991

It was grown Cubic $ZrO_2(10 mol% Y_2O_3)$ single crystals doped with 1 wt% rare earth metal oxides (RE=Ce, Pr, Nd, Eu, Er) by Skull method. It was investigated electrical properties on (111) plane of grown single crystals by Impedance Spectroscopy. It was potted relation between temperature and electrical conductivities and observed the transition at $약300-400^{\circ}$ It was obtained activation energy on the migration of oxygen vacancy between low temperature (before the transition) and high temperature (after the transition till ${\11}500^{\circ}$) and its difference can be seen the activation energy of the formation of oxygen vacancies by break up defect complexes. It was obtained the activation energy according as add yttria and rare earth metal oxides and discussed ionic conduction mechanism. Grown single crystals showed Ce: orange - red, Pr: golden - yellow, Nd: lilac, Eu: light pink, Er: pink due to dopant effect from the light absorption data in the visible range.