• Journal of Environmental Health Sciences
• /
• v.43 no.4
• /
• pp.314-323
• /
• 2017

Objectives: This study evaluated the odor emission characteristics from a wastewater treatment plant in an industrial complex area in Daegu City. Methods: Odor samples were collected from March 2016 to December 2016 and were analyzed for specified offensive odor substances. The odor quotient and the odor contribution was calculated. Results: Ammonia, hydrogen sulfide, acetaldehyde, and toluene were detected in all samples for monitoring specified odor compounds. The result of contribution analysis is that hydrogen sulfide had the highest contribution in all processes, followed by acetaldehyde. Conclusion: The major components of odor can be determined by evaluating the degree of contribution to the odor intensity and the concentration of the individual odor component. To increase the effectiveness of odor reduction, rather than addressing high-concentration odor compounds, policies focused on materials with a high odor contribution are necessary.

• Journal of Life Science
• /
• v.21 no.5
• /
• pp.700-705
• /
• 2011

Using enrichment procedures, we isolated organic solvent-tolerant Bacillus sp. BCNU 5005 from waste water and soil in the Ulsan industrial plant region. BCNU 5005 had a maximum similarity of 98% with B. subtilis and was designated as B. subtilis based on phylogenetic analyses using 16S rDNA sequences. Generally, most bacteria and their enzymes are destroyed or inactivated in the presence of high concentrations of organic solvents. However, the lipase activity of B. subtilis BCNU 5005 was very stable in the presence of various kinds of solvents (25%, v/v) except chloroform, ethylbenzene and decane. Furthermore, BCNU 5005 was determined to have a degradative ability towards organic solvents. This organic solvent tolerant Bacillus sp. BCNU 5005 could be used as a new potential resource for biotransformation and bioremediation.

• Applied Chemistry for Engineering
• /
• v.9 no.7
• /
• pp.1085-1089
• /
• 1998

The well-established nitric acid-sulfuric acid mixed acid process for the nitration of aromatic compounds has serious problems due to the large amount of waste acids and severe reaction conditions. Nitration of toluene can be conducted using nitrogen dioxide and ozone instead of mixed acid. We found that conc. nitric acid increased the reactivity as catalyst and the amount of nitrogen dioxide controlled the extent of nitration. Dinitration proceeded to more than 92 mole % conversion within 2 hr at $0^{\circ}C$ with 6 eq. of nitrogen dioxide and 2 eq./hr of ozone flow. Toluene completed mononitration within 30 min using 3 eq. of nitrogen dioxide, 3 eq. of nitric acid, and 1.5 eq./hr of ozone flow. As a clean process of aromatic nitration, this method is expected to replace the present process which causes the environmental problems.

• Journal of Korean Society on Water Environment
• /
• v.28 no.2
• /
• pp.277-284
• /
• 2012

This study developed a new ceramics in which natural zeolite was mixed and calcined with industrial by-product such as converter slag, red mud, and fly ash and evaluated the feasibility of the ceramics for removal of heavy metals in acid wastewater. The removal rate of heavy metal by ceramics increased in the order of ZS (zeolite and slag) > ZR (zeolite and red mud) > ZF (zeolite and fly ash) ceramics. The alkalinity increment and coherence of ceramics were increased in the order of ZS > ZR > ZF ceramics. The mixing ratio of natural zeolite to industrial by-product for maximum removal efficiency of heavy metal was 1:1 for ZS ceramics and 1:3 for ZR and ZF ceramics. The order of removal efficiency of heavy metal was observed to be ZS > ZR > ZF ceramics under the mixing ratio of 1:1 for ZS ceramics and 1:3 for ZR and ZF ceramics. The removal efficiency of heavy metal by ZS ceramics with 1:1 mixing ratio was Al 100%, Cd 54.6%, Cr 99.9%, Cu 98.7%, Fe 99.9%, Mn 42.2%, Ni 59.9%, Pb 99.8%, Zn 87.6%, respectively. In addition, the removal capacity of heavy metal by ZS ceramics was observed to be Al 2.01 mM/g, Cd 0.27 mM/g, Cr 1.02 mM/g, Cu 0.83 mM/g, Fe 0.95 mM/g, Mn 0.41 mM/g, Ni 0.55 mM/g, Pb 0.25 mM/g, Zn 0.70 mM/g, respectively. The comparative evaluation in the light of removal capacity, alkalinity increment, and coherence of ceramics showed the ZS ceramics had higher feasibility as a media than others for removal of heavy metals in acid wastewater.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.285-290
• /
• 2005

Until now, korean aquaculture industry has been grown largely from a quantitative viewpoint. However, an increase of quantity has caused lots of problems producing a derived effect recently. Nearly 82% of korean aquaculture farms had been installed mainly at inshore of the southern sea and also sewage, factory wastes, high density of fishcage at the limited area and autoinfection have deteriorated inshore fisheries. The offshore have been on the rise for the solution to these problems since it has clear seawater reduces the environmental pollution with much current. As a matter of fact, the existing inshore fishcage facilities have trouble advancing to the offshore due to the rough environmental conditons such as a high sea, strong currents etc.; therefore, it is necessary to develop a new cultivating equipment fit the open sea conditons. In this research, the theoretical study and experimental analysis have been carried out for the fishcage design of the structure which is able to use at the open sea.

• Korean Journal of Environmental Biology
• /
• v.22 no.1
• /
• pp.43-56
• /
• 2004

The seasonal distribution pattern of zooplankton were studied on the basis of the zooplankton samples collected from 9 stations in Jinhae Bay in May, August, November and February, 2001 to 2002. A total of 31 species in 37 taxa was occurred in Jinhae Bay. Copepods were pyedominant through fall to spring and cladecerans in summer. There aye high spatio-temporal fluctuations in the zooplankton abundance in a range of 27 to 28,221 indiv. $m^{-3}$. Of these, an neritic species, Acartia omorri and Oentropages abdominals were predominent in february; Palaealanus parvus s. 1 in November; Penilia avirostris in August. Species diversity was low in the northwestern regims where anoxia layer is occurred in summer, while in the other seasons there was no a great difference between stations. It indicates that the distribution pattern of zooplankton may be seasonally strongly affected by a mechanism of hypoxia formation in Jinhae Bay.

• Membrane Journal
• /
• v.29 no.6
• /
• pp.355-361
• /
• 2019

We studied the removal of barium ions that may be contained in industrial wastewater using the existing capacitive deionization (CDI). The 30 mg/L BaCl₂ (barium chloride dihydrate) solution was used as the feed solution, and the flow rate was set to 10 mL/min. The adsorption conditions were varied from 1.2 V to 3, 5 and 7 min, and the desorption conditions were -1, -1.5, -2 V and 1, 2 and 3 min, respectively, to select the most efficient conditions. As a result, barium ion removal efficiency of 64.4% was obtained under the adsorption conditions of adsorption of 1.2 V/7 min and the desorption -1 V/1 min. For the desorption voltages and time, under the same experimental conditions, the removal efficiency of CDI for 30 mg/L NaCl aqueous solution with the same concentration as barium showed 69.9% removal efficiency under the adsorption conditions of and the desorption conditions of 1.2 V/7 min desorption -1 V/1 min, respectively.

• Applied Chemistry for Engineering
• /
• v.10 no.6
• /
• pp.852-856
• /
• 1999

The objective of this study was to prepare hydrogel beads which were useful microbial immobilization to remove nitrogen and phosphorous in the industrial wastewater. Two different polyols(PEG, PTMG) terminated with photo-crosslinkable methacrylate groups were synthesized. Structures of the prepolymers and the UV cured hydrogels were characterized by using $^1H$-NMR and FT-IR spectroscopy. Water content, mechanical strength and pore sizes of the hydrogels having different MW of polyols and different ratios of PEG/PTMG were investigated. Hydrogels prepared from PEG(MW1000) only or the mixture of PEG(MW1000) and PTMG(MW2900) with 7:3 by weight were considered as potential candidates for the matrix for the immobilization of microorganism.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.113-116
• /
• 2008

As the integration in semiconductor display develops, semiconductor process becomes multilayer. In order to form several layer patterns, etching process which uses photoresistor (PR) must be performed in multilayer process. Repeated etching processes which take long time and PR residue cause mortal problems in semiconductor. To overcome such problems, we studied about the solution which eliminates PR effectively by using normal dry and wet etching method using plasma activated PR strip solvent in liquid condition. At first, we simulate the device which activates the plasma and make sure whether gas flow in device is uniform or not. Under activated plasma, etching effect is elevated. This improvement reduces etching time as well as display production time of semiconductor process. Generally, increasing etching process increases environmental hazards. Reducing etching process can save the etchant and protect environment as well.

• Journal of Korean Society on Water Environment
• /
• v.23 no.6
• /
• pp.850-862
• /
• 2007

This study was carried out to survey the actual conditions of wastewater treatment facilities to obtain basic data for the management of wastewater from industrial complexes in Chungcheongnam-do province. Wastewater production flow per site area by watersheds was $49.2m^3/km^2/d$ for Sapgyoho, $8.1m^3/km^2/d$ for Anseongcheon, $5.7m^3/km^2/d$ for Seohae, and $2.9m^3/km^2/d$ for Geumgang. Sapgyoho showed 75% of the total production flow, which was the highest value, Geumgang showed 4% of total flow, which was the lowest value. Average total extra rate as production flow/capacity flow in the wastewater treatment facilities for industrial complex is 49%. Considering by watersheds, the extra rates of Seohae, Geumgang, Anseongcheon, and Sapgyoho, are 73%, 65%, 62%, and 33% respectively. This means that the design of capacity flow in wastewater treatment facilities was too large. Effluent concentration of wastewater treatment facilities did not exceed discharge limit mostly. The removal efficiency rate for water quality item was 90% in BOD, 70% in COD, 80% in SS, 30 to 80% in TN, and 20 to 90% in TP, so the organic removal was good, but the nutrient removal was low and interval of variation was high. The removal efficiency rate of the agricultural was industrial complexes is lower than the national and local complexes. The construction cost of the wastewater treatment facilities in Chungcheongnam-do was $1,756Won\;per\;m^3$, treatment cost was $189Won\;per\;m^3$, and they were about two times and 1.2 times higher than the nation-wide cost, respectively. The treatment cost consists of 39% for man power, 21% for chemical, 16% for power, 11% for sludge treatment, and 13% for others.