• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.193-199
• /
• 2015

As a solution of both environmental issue of reducing carbon dioxide emission and sustainable issue of exhausting natural resources, in concrete industry, many research on recycling various by-products or industrial wastes as the concrete materials has been conducted. The aim of this research is feasibility analysis of additional reaction with ordinary Portland cement and flue gas desulfurization gypsum based on the blast furnace slag and recycled fine aggregate based mortar to achieve the normal strength range. Consequently, in the case of mortar replaced 10% FGD and 30% OPC for BS, 80% of plain OPC mortar's compressive strength was achieved. Furthermore, when the water-to-binder ratio is decreased to keep the practically similar level of flow, it is expected to be achieve the equivalent compressive strength to plain OPC mortar.

• 월간산업보건
• /
• s.249
• /
• pp.72-73
• /
• 2009

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.553-559
• /
• 2015

In this study, to suggest the application method of recycled fine aggregate, the non-cement mortar was prepared and studied with the binders of blast furnace slag, fly ash, and fly ash from combined heat power plant. As a basic experiment, a series of tests was conducted to determine the potions of the binders and types of activator. When the binder was consisted with 20% of fly ash and 40% of fly ash from combined heat power plant, the highest strength of the mortar was obtained, and as an activator, the combination of sodium hydroxide 2.5%, and calcium hydroxide 7.5% showed the highest strength of the mortar. Therefore, this study focuses on engineering properties of mortar contains fly ash from combined heat power plant and recycled fine aggregate according to replacement ratio of recycled fine aggregate based on the optimum mix from the basic experiment. As a result, the best replacement ratio of recycled fine aggregate is 75%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.59-59
• /
• 2021

최근 기후변화에 따른 가뭄의 상습화와 농촌용수 수요증가에 대비할 수 있는 가뭄대책의 수립을 통한 용수부족 문제에 대한 근본적인 해소의 필요성 증가하고 있는 가운데 기존 수자원을 효율적으로 활용하기 위한 4차 산업기술을 적용한 순환형 농업용수 관리시스템의 개발이 요구되고 있다. 본 연구는 2017년 가뭄이 극심하였던 충청남도 대사저수지, 풍전저수지와 경기도 마둔저수지에 대하여 기상분석, 관개분석, 수리분석 등을 수행하여 이수관리, 관개만족도, 회귀수의 재이용 등을 예측 관리할 수 있는 순환형 농업용수 관리 시스템을 개발하여 적용하고자, 선제적으로 가뭄 발생 들녘의 용수공급을 위한 농업용 저수지 소유역 순환용수 가용수량을 추정하였다. 2010년부터 2019년까지의 강우유출 모형을 적용하기 위하여 수원, 천안, 이천관측소의 강우, 최고/최저기온, 상대습도, 풍속, 일사량자료를 일자료로 활용하였고, 10년 평균 유출량을 순별로 산정하여 기본자료로 구축하여 주요 취입보 유입수량을 산정하였다. 주요 취입보 유입수량 산정과 취입보의 용적을 산출하기 위하여 시설별 높이차와 하천의 길이 및 폭을 측정하였으며 물수지는 보유용수량과 유입량의 합에서 공급수량을 제외한 값으로 정의하였고, 내용적을 초과하는 경우에는 범람되는 것으로 구현하여 마둔, 대사, 풍전저수지의 임의 지점(하천)별로 순환용수 가용을 위한 모의를 실시하였다. 공간 범위는 평야부 말단부로 선정하였고, 가상으로 약 2m 높이의 임시보를 적용하여 관개기 강우유출수 및 퇴수에 의한 가용수량을 산정하였다. 이를 위하여 하천의 폭과 표고를 이용하여 길이를 산출하여, 내용적을 산출하였다. 소유역별로 TANK 모형적용 결과를 입력자료로 활용하여 일 공급 양수량을 내용적 최대로 하였을 때 회복 기간에 대한 모의를 수행하였다. 강우유출수에 의한 소유역별 가용수량을 4월부터 모의 분석한 결과 유역별로 차이는 발생하지만 만수위에 도달하는 기간은 특이 유역을 제외하고는 약 50일 이상 걸리는 것으로 분석되었고, 관개기가 계속되면서 회복되는 기간이 짧아지는 경향을 보였다. 이를 통해 소유역별 농업용수 부족분 투입을 위한 위치선정과 용수량 판단이 가능할 것으로 예상된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.150-152
• /
• 2021

For the development of a resource recycling society, it is important to control the generation of waste in all processes such as production, distribution, consumption and disposal, and to recycle the recyclable resources of waste instead of simply landfilling and incineration. However, in order to develop a resource-recycling society, not only emitters, businesses, and the central government, but also local governments need to work together to find a solution. Therefore, in this study, we present a promotion strategy for the development of Sejong City's resource-recycling society, taking into consideration the current situation of Sejong City as well as changes in the government's institution system. We suggest that regionally preparing recycling priority management plan, maximizing waste resource utilization, establishing recycling industry activation plan, and building a systematic and efficient recycling platform, etc.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.1
• /
• pp.43-55
• /
• 2009

We consider a Direct Input Output Manufacturing System(DIOMS) which has a number of machine centers placed along a built-in Automated Storage/Retrieval System(AS/RS). The Storage/Retrieval (S/R) machine handles parts placed on pallets for the operational aspect of DIOMS and determines the optimal operating policy by combining computer simulation and genetic algorithm. The operational problem includes: input sequencing control, dispatching rule of the SIR machine, machine center-based part type selection rule, and storage assignment policy. For each operating policy, several different policies are considered based on the known research results. In this paper, using the computer simulation and genetic algorithm we suggest a method which gives the optimal configuration of operating policies within reasonable computation time.

• Korean System Dynamics Review
• /
• v.12 no.1
• /
• pp.5-37
• /
• 2011

This article aims to clarify what is the best investment behavior in Capital Intensive Industries(hereinafter CIIs) which show repeated business cycles. In CIIs, investments is centered in the period of upturns and goes beyond the adequate level because of the time that takes to completion of facilities. This over-investment causes oversupply and downturn, and in period of downturn, investments shrinks under the adequate level. The repeated change of over-investment and under-investment is the reason for the business cycles. In this article, a simulation model replicating the business cycles in CIIs was constructed and the effects of various investment strategies was tested. The results are as follows. First, the investment behavior following market condition causes the ongoing fluctuation of profits. Second, strategic increase in flexibility such as adjustment of facility utilization and shortening of facility construction time contributes to the increase in profit and stabilization of income. Third, in relation to market condition, the constant investment is more profitable in stagnated market and the counter-market investment is more profitable in growing market. In sum, it is desirable not to synchronize their investment with those of competitors.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.53-63
• /
• 2006

The objective of this study is to estimate Korean transportation service index (KTSI), and to explore possible uses of the KTSI. The KTSI was monthly index to represent the level of passenger and freight services by road, railroad, air and maritime modes, which was developed from eight series. Four of these series measure the level of passenger services (passenger-kilometers) by road, railroad. air and maritime modes : monthly data from January 1995 to December 2004. Similarly. the remaining four series measure the level or freight activity (tonnage) by four modes during the same period. Given the weights of modal revenues, component series were aggregated into two indexes (passenger index and freight index) and a composite index using Chained Fisher Ideal index. which was a geometric mean of the Laspeyres index and the Passche index. The Fisher Ideal index is one of the 'superlative' indexes, which diminish 'substitution bias' as current-weighted indexes. As a result, the freight index and the composite index explain economic conditions better than the passenger index. Based on the composite index. the newly estimated KTSI shows an average lag time of one and a half years at peaks and three months at troughs in comparison with domestic business cycles. Nonetheless. the following efforts are needed for more credible and useful estimates; establishment of data collection scheme in time. credibility uplift of used data, development of various indexation methods.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.3
• /
• pp.75-81
• /
• 2009

The industrial by-products market has increased at a geometric rate worldwide with the rapid economic growth. Among the wide variety of industrial by-products, fly ash which is generated by the combustion of coal is one of the more troublesome industrial wastes because they entail substantial disposal cost and also cause a shortage of disposal sites. In Korea alone, fly ash generation is expected to increase to 5.8 million tons by 2009, and to 6 million tons by 2010. Given the accelerated industrial development in developing countries, the amount of fly ash generation is predicted to reach enormous levels throughout the world. An increasing number of studies have currently focused on the feasibility of recycling industrial wastes i.e., fly ash in terms of environmental advantages. In this study, the optimized mix proportion of high performance shotcrete using fly ash was determined for the purpose of promoting recycling and reuse of resources.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.670-682
• /
• 2018

Engineered nanomaterials (ENMs) can be released to humans and the environment through the generation of waste containing engineered nanomaterials (WCNMs) and the use and disposal of nano-products. Nanoparticles can also be introduced intentionally or unintentionally into waste streams. This study examined WCNMs in domestic industries, and target nanomaterials, such as silicon dioxide, titanium oxide, zinc oxide, nano silver, and carbon nanotubes (CNTs), were selected. We tested 48 samples, such as dust, sludge, ash, and by-products from manufacturing facilities and waste treatment facilities. We analyzed leaching and content concentrations for heavy metals and hazardous constituents of the waste. Chemical compositions were also measured by XRD and XRF, and the unique properties of nano-waste were identified by using a particle size distribution analyzer and TEM. The dust and sludge generated from manufacturing facilities and the use of nanomaterials showed higher concentrations of metals such as lead, arsenic, chromium, barium, and zinc. Oiled cloths from facilities using nano silver revealed high concentrations of copper, and the leaching concentrations of copper and lead in fly ash were higher than those in bottom ash. In XRF measurements at the facilities, we detected compounds such as silicon dioxide, sulfur trioxide, calcium oxide, titanium dioxide, and zinc oxide. We found several chemicals such as calcium oxide and silicon dioxide in the bottom ash of waste incinerators.