• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.5
• /
• pp.859-865
• /
• 2011

This study looked into 110 sites of orchard fields to investigate the relationships between the physical and chemical properties of soils, including heavy metal contents, and the topographic characteristics of the fields in Jeonbuk province. The topographic distribution of orchard fields in Jeonbuk province was local valley and fans, hilly and mountains, mountain foot slopes, alluvial plains, diluvium, and fluvio-marine deposits. Forty-six percent (46%) of total orchard fields were located in the hilly and mountains. Soil texture of the local valley and fans was mostly sandy clay loam, and the soil texture of other topographical sites were varied. Bulk density, porosity, and soil hardness were not different among the various topographic sites. The content of plant available water was the highest (19.5%) in the sites of diluvium. Soil pH, electrical conductivity (EC), and exchangeable $Mg^{2+}$ content were the highest in the sites of fluvio-marine deposits, whereas the contents of soil organic matter (SOM), available phosphorus, and exchangeable $Ca^{2+}$, $K^+$, and $Na^+$ were not significantly different among the topographic sites. Also, soil pH and SOM content were generally in optimal ranges for the fruit plants in the orchard fields, but other values were mostly higher than those in optimum. In addition, the contents of heavy metals were much lower than the levels of Soil Contamination Warning Standard.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.715-726
• /
• 2019

With the increasing prevalence of high-resolution satellite images, the need for technology to generate accurate 3D information from the satellite images is emphasized. In order to create a digital terrain model (DTM) that is widely used in applications such as change detection and object extraction, it is necessary to extract trees, buildings, etc. that exist in the digital surface model (DSM) and estimate the height of the ground. This paper presents a method for automatically generating DTM from DSM extracted from KOMPSAT-3A stereo images. The technique was developed to detect the non-ground area and estimate the height value of the ground by using the previously constructed low-resolution topographic data. The average vertical accuracy of DTMs generated in the four experimental sites with various topographical characteristics, such as mountainous terrain, densely built area, flat topography, and complex terrain was about 5.8 meters. The proposed technique would be useful to produce high-quality DTMs that represent precise features of the bare-earth's surface.

• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.179-197
• /
• 2020

Topographic normalization reduces the terrain effects on reflectance by adjusting the brightness values of the image pixels to be equal if the pixels cover the same land-cover. Topographic effects are induced by the imaging conditions and tend to be large in high mountainousregions. Therefore, image analysis on mountainous terrain such as estimation of wildfire damage assessment requires appropriate topographic normalization techniques to yield accurate image processing results. However, most of the previous studies focused on the evaluation of topographic normalization on satellite images with moderate-low spatial resolution. Thus, the alleviation of topographic effects on multi-temporal high-resolution images was not dealt enough. In this study, the evaluation of terrain normalization was performed for each band to select the optimal technical combinations for rapid and accurate wildfire damage assessment using PlanetScope images. PlanetScope has considerable potential in the disaster management field as it satisfies the rapid image acquisition by providing the 3 m resolution daily image with global coverage. For comparison of topographic normalization techniques, seven widely used methods were employed on both pre-fire and post-fire images. The analysis on bi-temporal images suggests the optimal combination of techniques which can be applied on images with different land-cover composition. Then, the vegetation index was calculated from the images after the topographic normalization with the proposed method. The wildfire damage detection results were obtained by thresholding the index and showed improvementsin detection accuracy for both object-based and pixel-based image analysis. In addition, the burn severity map was constructed to verify the effects oftopographic correction on a continuous distribution of brightness values.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.1
• /
• pp.13-26
• /
• 2023

Recently, as the development of underground spaces has become active due to rapid urbanization and population density, interest in the ground behavior according to the construction of underground spaces is increasing. In large cities with high population density and many buildings, ground subsidence has a great impact on structures and there may be a risk of collapse, so the analysis of ground behavior due to underground construction is essential. Previous studies have been conducted on the subsidence pattern of the surface and the deformation of the tunnel when constructing the tunnel, but analysis has rarely been conducted by using actual topographic information. Therefore, this study analyzed the difference in ground behavior between the actual topography and the flat topography. As a result, it was confirmed that ground settlement occurs at higher elevations, such as in mountainous topography, and when the numerical analysis is performed considering topographical information, the crown settlement of the tunnel is up to about approx. It showed a difference of 10 mm, and it was found that the sensitivity was less in the case of displacement of tunnel wall compared to the crown settlement and ground settlement. The numerical analysis considering the actual GIS-based topographic information presented in this study can be used to obtain more accurate surface subsidence data to understand the behavior of the upper structure due to tunnel excavation.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.186-187
• /
• 1999

우리나라의 경우, 대부분의 대도시가 연안지역에 위치해 있고 이들 대도시는 대규모 공단지역을 포함하고 있어 오염물질의 거대한 배출원으로 작용하고 있다. 또한 우리나라의 지형적인 특성을 보면, 내륙과 마찬가지로 연안부근 대도시의 경우도 산악성 지형의 형태를 띄고 있으며 연안의 굴곡도 심하게 나타나고 있다. 일반적으로 이들 대도시 지역에서 고농도의 대기오염이 나타나는 경우는 종관기상장의 영향이 적어서 국지순환계의 영향이 크게 부각되는 기간이다.(중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.131-132
• /
• 2003

확산 모델의 선정은 도시, 임해 산악 지역, 임해 평야지역, 계곡지역, 분지지역 등 각 지형에 대해 계절별, 오염물질별, 평균화시간별로 적절성이 있어 보이는 여러 경쟁모델들을 적용해 보고 그 중에서 실측결과에 가장 근접하는 계산치를 제공하는 모델을 선정해야 한다. 특히 Dioxin등 독성물질들에 대해서는 대부분의 해석학적 확산모델들을 적용하기 곤란한 저풍속, 풍향요동(Meandering) 조건시 등에도 단시간 평균농도 계산치의 정확도가 높은 모델들을 선정하는 것이 중요하다(박옥현 등, 1999). (중략)

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03a
• /
• pp.125-133
• /
• 2004

강원도는 한반도의 중동부에 위치한 산악 지형으로 구성되어 있다. 해발고도 100m이하의 저지대는 강원도 총면적의 5.6%에 불과하고 100-500m까지의 저산지대가 43.1%, 500-1000m까지의 중산지대가 43.6%, 1000m이상의 고산지대가 7.7%로서 전반적으로 매우 험준한 산세를 이룬다. 동해안을 따라서 NNW-SSW방향으로 발달된 태백산맥과 그의 서쪽에서 서남쪽으로 발달된 차령산맥과 소백산맥은 중국방향(NE-SW)의 지질구조선을 형성하고 있다.(중략)

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.1
• /
• pp.36-44
• /
• 2006

In this study, we constructed a forest fire danger map in the Yeongdong area of Gangwon-do and Northeastern area of Gyeongsangbuk-do using a forest fire rating model and geographical information system (GIS). We investigated the appropriate positions of the automatic weather station (AWS) and a comprehensive network solution (a system including measurement, communication and data processing) for the establishment of an optimum mountain meteorological observation network system (MMONS). Also, we suggested a possible plan for combining the MMONS with unmanned monitoring camera systems and wireless relay towers operated by local governments and the Korea Forest Service for prevention of forest fire.

• Proceedings of the KGS Conference
• /
• 2003.05a
• /
• pp.87-90
• /
• 2003

한반도의 강수는 여름철 강수량이 연 강수량의 50% 이상이며, 여름 강수량의 상당 부분이 장마기간에 집중되어 내리는 특성을 갖고 있다 (Ho and Kang, 1988). 장마기간의 강수는 산악 등 지형의 영향을 받아서 어느 지역에 집중되어 내리며, 그 지역에 커다란 인명 및 재산상의 피해를 끼친다. 이러한 집중호우로 의한 피해는 국가의 경제와 산업이 발달할수록 증가하고 있다. 그러나 아직까지도 장마기간동안 시간과 공간적으로 다양하게 변화하는 강수발생의 이해와, 나아가 집중호우의 예측에 대한 연구는 어려운 과제로 남아 있다. (중략)

• Proceedings of the Speleological Society Conference
• /
• 1995.08a
• /
• pp.88-88
• /
• 1995

I. 서론 II. 관광자원의 분류 1. 자연관광자원 : 산악 호수 하천 계곡 산림 온천 지형 자연현상등 2. 문화관광자원 : 고고적유적 유무형문화재 향토예술제 박물관 등 3. 사회관광자원 : 풍속 행사 예술 종교 음악 사회형태 스포층 등 4. 산업관광자원 : 공업단지 백화점 전람회 사회공공시설 농업 상업 등 5. 위락관광자원 : 수영장 레저타운 카지노 승마장 놀이시설 등(중략)