• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.84-92
• /
• 2001

(La,Sr)MnO$_3$(LSM)-YSZ 복합체 양극의 산소환원 반응기구에 대해 고찰하였다. YSZ를 첨가함에 따라 복합체 양극의 ohmic 저항이 증가하고, 분극 저항은 YSZ를 40 wt%~50 wt% 혼합하였을 때 최소값을 나타내었다. 또한 LSM-YSZ 복합체 양극의 산소환원 반응기구는 1가 산소이온의 표면확산과 산소이온전달반응에 의해서 지배됨을 알 수 있었다. 임피던스 분석 결과에 따르면 고주파수 영역에서 나타나는 반원은 산소이온전달반응으로 산소분압 의존성이 거의 없고, YSZ가 40 wt% 첨가되었을 때 최소값을 나타내었다. 중간주파수 영역에서 나타나는 반원은 1가 산소이온의 표면확산반응으로 산소분압 의존성은 약 1/4이고, YSZ가 40~50 wt% 첨가되었을 때 최소값을 나타냈다. 한편, 저주파수 영역에 나타나는 반원은 가스확산반응으로 산소분압 의존성이 1이고, 온도에 따른 의존성이 거의 없었다.

• Resources Recycling
• /
• v.18 no.5
• /
• pp.12-18
• /
• 2009

The 20% Pt/C catalysts were synthesized using the chemical reduction method for polymer electrolyte fuel cell cathode and were heat-treated in the temperature range from 300 to $600^{\circ}C$. The oxygen reduction reaction of the catalysts was evaluated using the electrochemical measurement. The oxygen reduction reaction of the heat-treated Pt/C at $300^{\circ}C$ had high catalytic activity and the oxygen reduction reaction current of that was 2 times than that of non-heat treatment catalyst. It is considered that the change of the crystallinity and particle size by heat treatment could increase the catalytic activity.

• Applied Chemistry for Engineering
• /
• v.4 no.1
• /
• pp.153-161
• /
• 1993

Cathodic oxygen reduction kinetics on $La_{0.9}Sr_{0.1}MnO_3$ electrode have been examined at $700-900^{\circ}C$ under various oxygen partial pressures. AC impedance and current interruption techniques were employed for the determination of charge transfer resistances for electrochemical oxygen reduction. The $R_{ct}$ values obtained from two different methods were very close each other for $La_{0.9}Sr_{0.1}MnO_3$ electrode. Activation energy for the electrochemical oxygen reduction was found to be 174kJ/mol under atmospheric oxygen pressure. $R_{ct}$ measurements as a function of oxygen partial pressure indicate that the rate-determining step for the electrochemical oxygen reduction on $La_{0.9}Sr_{0.1}MnO_3$ electrode is the charge transfer process.

• Journal of the Korean Chemical Society
• /
• v.37 no.8
• /
• pp.735-743
• /
• 1993

The electrocatalytic reduction of oxygen is investigated by cyclic voltammetry and chronoamperometry at glassy carbon electrode and carbon microelectrode coated with a variety of cobalt phenylprophyrins in various pH solutions. Oxygen reduction catalyzed by the monomeric porphyrin Co(Ⅱ)-TPP mainly occurs through the 2e$^-$ reduction pathway resulting in the formation of hydrogen peroxide whereas electrocatalytic process carried out 4e$^-$ reduction pathway of oxygen to H$_2$O at the electrodes coated with cofacial bis-cobalt phenylporphyrins in acidic solution. The electrocatalytic reduction of oxygen is irreversible and diffusion controlled. The reduction potentials of oxygen in various pH solutions have a straight line from pH 4 to pH 13, but level off in strong acidic solution. The reduction potentials of oxygen shift to positive potential more 400 mV at the electrode coated with monomer Co-TPP compound than bare glassy carbon electrode while 750 mV at the electrode coated with dimer Co-TPP compound.

• Clean Technology
• /
• v.20 no.3
• /
• pp.269-276
• /
• 2014

This study was aimed to develop catalytic system for the dry-based reduction of oxidized mercury ($Hg^{2+}$) to elemental mercury ($Hg^0$) which is one of the most important components comprising mercury continuous emission monitoring system (Hg-CEMS). Based on the standard potential in oxidation-reduction reaction, transition metals including Fe, Cu, Ni and Co were selected as possible candidates for catalyst proceeding spontaneous reduction of $Hg^{2+}$ into $Hg^0$. These transition metal catalysts revealed high activity for reduction of $Hg^{2+}$ into $Hg^0$ in the absence of oxygen in reactant gases. However, their activities were greatly decreased in the presence of oxygen, which was attributed to the transformation of transition metals by oxygen to the corresponding transition metal oxides with less catalytic activity for the reduction of oxidized mercury. Hydrogen supplied to the reactant gases significantly enhanced $Hg^{2+}$ reduction activity even in the presence of oxygen. It might be due to occurrence of combustion reaction between $H_2$ and $O_2$ causing the consumption of $O_2$ at such high reaction temperature at which oxidized mercury reduction reaction took place. Because the system showed high activity for $Hg^{2+}$ reduction to $Hg^0$, which was compatible to that of wet-chemistry technology using $SnCl_2$ solution, the catalytic reduction system of Fe catalyst with the supply of $H_2$ could be employed as a commercial system for the reduction of oxidized mercury to elemental mercury.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.477-477
• /
• 2012

미생물 연료전지는 정부가 추진하고 있는 신성장 동력사업의 녹색성장 정책에 부합하는 환경융합 신기술로써 일상생활에서 배출되는 하 폐수와 같은 유기물질을 전자공여체로 이용하여 전기에너지를 생산 할 수 있다는 점에서 각광받고 있다. 미생물 연료전지는 산화전극부의 미생물이 공급된 유기물질 을 분해하여 전자와 수소이온을 생성시키며 이들은 산소가 존재하는 환원전극부로 이동하여 물로 환원 됨 으로써 전기를 생성한다. 전기 화학적 성능의 향상을 위해 미생물 연료전지에서는 환원전극부에 서의 산소와 전자 및 수소이온의 빠른 환원반응을 유도해 주는 Pt촉매를 이용한다. 하지만 고가의 Pt 촉매는 미생물 연료전지의 현장적용을 위한 규모확장 시 초기비용이 증가되는 문제점을 초래한다. 이에 미생물 연료전지의 대체촉매 개발에 대한 많은 연구가 진행되고 있다. 화학적 연료전지에 관한 논문에서 연료전지의 촉매로 산소 환원반응에 높은 성능을 보이는 Co-N/C 형태의 Cobalt poly-pyrrole carbon가 제시 되었다. 이는 가격적인 측면에서는 Pt촉매의 약1/10배 정도 수준이지만 셀 성능은 Pt촉매의 95%정도의 효율을 보인다는 측면에서 향후 Pt 대체촉매로 가능성을 보여주는 새로운 비금속 촉매물질이다. Cobalt poly-pyrrole carbon이 Pt-catalsyt 셀 전압 성능 대비 약 66 %의 효율을 보였고 내부저항과 최대전력 밀도에 있어서도 촉매를 사용하지 않은 경우와 비금속 촉매의 성능보다 높음을 알 수 있었다. 본 연구는 Pt-catalsyt를 대체할 수 있는 저가의 산소환원 촉매물질 발굴을 위해 미생물연료전지에서 사용된 전례가 없으며 현재 화학전지의 촉매로 널리 쓰이고 있는 Cobalt poly-pyrrole carbon의 산소환원 촉매로써의 이용가능성을 평가하기 위해 실시되었으며, 평가한 결과는 첫 번째로 Cobalt poly-pyrrole carbon을 사용한 경우가 촉매를 사용하지 않은 경우와 비금속 촉매보다 환원 전극부에서의 원활한 환원작용이 진행되고 있음을 추측할 수 있으며 Pt-catalyst와 비교하였을 때 성능 대비 저렴한 가격으로 가격 경쟁력에 있어서 우월하다고 판단되었고 두 번째로 전기화학적 성능평가 및 EIS를 이용한 환원전극부의 내부저항 평가를 실시한 결과 셀 전압에 있어서 가장 많은 도말량 ($2.0mg/cm^2$)이 높은 성능을 보이고 있음을 알 수 있었다.

• Clean Technology
• /
• v.20 no.3
• /
• pp.212-217
• /
• 2014

In order to regenerate the sulfidated desulfurization sorbent, oxygen is used as the oxidant agent on the regeneration process. The small amount of oxygen un-reacted in regeneration process is flowed into direct sulfur recovery process. However, the reactivity for $SO_2$ reduction can be deteriorated with the un-reacted oxygen by various reasons. In this study, the deactivation effects of un-reacted oxygen contained in the off-gas of regeneration process flowed into direct sulfur recovery process of hot gas desulfurization system were investigated. Sn-Zr based catalysts were used as the catalyst for $SO_2$ reduction. The contents of $SO_2$ and $O_2$ contained in the regenerator off-gas used as the reactants were fixed to 5.0 vol% and 4.0 vol%, respectively. The catalytic activity tests with a Sn-Zr based catalyst were for $SO_2$ reduction performed at $300-450^{\circ}C$ and 1-20 atm. The un-reacted oxygen oxidized the elemental sulfur produced by $SO_2$ catalytic reduction and the conversion of $SO_2$ was reduced due to the production of $SO_2$. However, the temperature for the oxidation of elemental sulfur increased with increasing pressure in the catalytic reactor. Therefore, it was concluded that the decrease of reactivity at high pressure is occurred by catalytic deactivation, which is the re-oxidation of lattice oxygen vacancy in Sn-Zr based catalyst with the un-reacted oxygen on the catalysis by redox mechanism. Meanwhile the un-reacted oxygen oxidized CO supplied as the reducing agent and the temperature in the catalyst packed bed also increased due to the combustion of CO. It was concluded that the rapidly increasing temperature in the packed bed can induce the catalytic deactivation such as the sintering of active components.

• Journal of the Korean Ceramic Society
• /
• v.38 no.1
• /
• pp.93-99
• /
• 2001

(La,Sr)MnO$_3$(LSM)-YSZ 복합체 양극에 있어서 소결온도 및 전극두께와 cathodic potential이 전극 특성에 미치는 영향을 고찰하였다. 양극의 소결은 삼상계면의 양을 결정하는 중요한 변수로 LSM 단미 양극과 YSZ가 40 wt% 포함된 LSM-YSZ 복합체 양극 모두 120$0^{\circ}C$에 소결했을 때 가장 낮은 분극저항을 나타내었다. 또한 양극 후막의 두께가 얇아지면 양극의 in-plane 저항이 증가하여 ohmic 저항이 증가하였는데, LSM-YSZ 복합체 양극의 경우 약 30$mu extrm{m}$ 정도의 전극두께가 가장 효과적인 전극 특성을 나타내었다. 한편, LSM-YSZ 복합체 양극에 -0.5 V의 cathodic potential을 인가함에 따라 양극에서 일어나는 산소환원반응의 활성이 증가하였는데, 1가 산소이온의 표면확산반응의 분극저항은 감소하였으나, 고주파수 영역에서 나타나는 산소이온전달반응의 저항은 거의 변화하지 않았다. 이것은 Mn의 환원에 의한 양극표면에 생성된 산소공공에 기인한다.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.96-104
• /
• 2009

In order to lower a reaction temperature with high conversions for simultaneous catalytic reduction of NO and $N_2O$ over Pd-Rh supported mixed metal oxide honeycomb catalysts, $H_2$ or CO was utilized as a reductant. When using the reductants, the effects of reaction conditions were examined in NO and $N_2O$ conversions, where reaction temperatures, concentrations of the reductants and oxygen and the concentration ratio of $N_2O$ to NO were varied. In using $H_2$ reductant, larger than 50% of NO and $N_2O$ conversions was observed at the temperatures below $200^{\circ}C$ in absence of $O_2$. In using CO reductant, NO and $N_2O$ conversions increased from the temperatures higher than $200^{\circ}C$ and $300^{\circ}C$, respectively. However, in use of both reductants, NO and $N_2O$ conversions decreased with increasing oxygen concentration. As a result, $H_2$ reductant could reduce simultaneously NO and $N_2O$ at relatively lower reaction temperature than CO. Also, NO and $N_2O$ conversions were less influenced by using $H_2$ reductant than CO one. Concentration ratio between NO and $N_2O$ did not affect their conversions regardless the type of reductants. Pretreatment of the catalyst in $H_2$ was more effective in simultaneous reduction of NO and $N_2O$ at low reaction temperature than that in $O_2$.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.5
• /
• pp.242-248
• /
• 2016

The overall reaction rate of fuel cell is governed by oxygen reduction reaction (ORR) in the cathode due to its slowest reaction compared to the oxidation of hydrogen in the anode. The ORR efficiency can be readily evaluated by examining the adsorption strength of atomic oxygen on the surface of catalysts (i.e., known as a descriptor) and the adsorption energy can be controlled by transforming the surface geometry of catalysts. In the current study, the effect of the surface geometry of catalysts (i.e., strain effect) on the adsorption strength of atomic oxygen on platinum catalysts was analyzed by using density functional theory (DFT). The optimized lattice constant of Pt ($3.977{\AA}$) was increased and decreased by 1% to apply tensile and compressive strain to the Pt surface. Then the oxygen adsorption strengths on the modified Pt surfaces were compared and the electron charge density of the O-adsorbed Pt surfaces was analyzed. As the interatomic distance increased, the oxygen adsorption strength became stronger and the d-band center of the Pt surface atoms was shifted toward the Fermi level, implying that anti-bonding orbitals were shifted to the conduction band from the valence band (i.e., the anti-bonding between O and Pt was less likely formed). Consequently, enhanced ORR efficiency may be expected if the surface Pt-Pt distance can be reduced by approximately 2~4% compared to the pure Pt owing to the moderately controlled oxygen binding strength for improved ORR.