Polydimethylsiloxane(PDMS) containing [N, N'-bis (3- (salicylidene amino) propyl) amine Co(II)] (Co(saldpt)) as a fixed oxygen carrier was synthesized. UV-visible spectra of the membrane demonstrated that Co(saldpt) binded molecular oxygen specificaaly and reversibly. From time lag method experiment, it was found that both oxygen permeability and diffusibity increase with decreasing upstream pressure, while solubility maintain nearly constant. The maximum oxygen permeability and oxygen selectivity over nitrogen obtained was 18.6 barrer and 4, respectively, at 25 mmHg and $40^{\circ}C$ from the the PDMS membrane containing 1 wt% of Co(saldpt). Facilitation behavior was explained in terms of the dual sorption model.
Biodegradable polyurethane (PU)/clay nanocomposite films were prepared via extrusion compounding process followed by casting film process. Organically modified montmorillonite (denoted as C30B) with a large amount of hydroxyl groups on its surface was used for the formation of strong bonding with PU resin. From both XRD analysis and TEM observations, the intercalated and exfoliated structure, and dispersion state of silicate platelets in the compounded nanocomposite films were confirmed. In addition, the rheological and tensile properties, optical transparency, oxygen permeability of the prepared nanocomposites were investigated as a function of added nanoclay content, and moreover based on these results, the corelation between the morphology and the resulting properties of the nanocomposites could be presented. The inclusion of nanoclays at appropriate content resulted in remarkable improvement in the nanocomposite performance including tensile modulus, elongation, transparency, and oxygen barrier property, however at excess amount of nanoclays, reduction or very slight increase was observed due to poor dispersion. The biodegradability of the prepared nanocomposite film was evaluated by examining the deterioration in the barrier and tensile properties during degradation period under compost.
The separation permeation characteristics of $N_2-O_2$ gas in air at cell membrane model of skin which irradiated by high energy electron(linac 6 MeV) were investigated. The cell membrane model of skin used in this experiment was a sulfonated polydimethyl siloxane(PDMS) non-porous membrane. The pressure range of $N_2$ and $O_2$ gas were appeared from $1kg_f/cm^2$ to $6kg_f/cm^2$. In this experiment(temperature $36.5^{\circ}C$), the permeation change of $N_2$ and $O_2$ gas in non-porous membrane by non-irradiation were found to be $1.19{\times}10^{-4}-2.43{\times}10^{-4}$, $1.72{\times}10^{-4}-2.6{\times}10^{-4}cm^3(STP)/cm^2{\cdot}sec{\cdot}cmHg$, respectively. That of $N_2$ and $O_2$ gas in non-porous membrane by irradiation were found to be $0.19{\times}10^{-4}-0.56{\times}10^{-4}$, $0.41{\times}10^{-4}-0.76{\times}10^{-4}cm^3(STP)/cm^2{\cdot}sec{\cdot}cmHg$, respectively. The irradiated membrane was significantly decreased about 4-10 times than membrane which was not irradiated. And ideal separation factor of $N_2$ and $O_2$ gas by non-irradiation was found to be from 1.32 to 0.42 and that of $N_2$ and $O_2$ gas by irradiation was found to be from 0.237 to 0.125. The irradiated membrane was significantly decreased about 4-5 times than membrane which was not irradiated. When the operation change(cut) and pressure ratio(Pr) by non-irradiation were about 0, One was increased to the oxygen enrichment and the other was decreased to the oxygen enrichment. The irradiated membrane was significantly decreased about 4-19 times than membrane which was not irradiated. As the pressure of $N_2$ and $O_2$ gas was increased, the selectivity was decreased. As separation permeation characteristics of $N_2-O_2$ gas in cell membrane model of skin were abnormal, cell damages were appeared at cell.
In this study, we confirmed water content and oxygen permeability of new polymeric materials synthesized from itaconic acid used for soft contact lenses. In this study, we polymerized materials for soft contact lenses using HEMA (2-hydroxyethyl methacrylate), the based-monomer of soft contact lenses, EGDMA (ethylene glycol dimethacrylate) as a cross linkage agent, and the new additives mono-ester or di-ester derived from itaconic acid commercially produced by the fermentation of A. itaconicus. New polymer materials for contact lenses were synthesized with the mixture of HEMA and mono- or di-ester at different ratios and water content and oxygen permeability (Dk) was analyzed. In polymerizing HEMA and mono-ester (15%), the water content and oxygen permeability of contact lenses were found to be of good value at 57.7% and 28.6 Dk respectively. The mixture of HEMA and mono-ester is more excellent than HEMA/di-ester in regards to water content and oxygen permeability. The water content and oxygen permeability of soft contact lenses made by new polymeric materials were highly represented.
The permeation properties of $O_2\;and\;N_2$ were measured for bromobisphenol A polysulfone(BPSf), bisphenol A trimethylsilylated polysulfone(TMSPSf) and their blend membrane to investigate the structure-properties relationships. BPSf shows relatively high permselectivity. It can be explained that the strong polarity of bromine in BPSf increases chain packing ability. In this case the distance of polymer chains is reduced by increasing of interchain interaction by induced dipole. TMSPSf shows relatively high permeability. The higher value of permeability coefficients for TMSPSf is due to the substitution of very bulky trimethylsilyl groups. The replacement of phenyl hydrogens of bisphenol A polysulfone(PSf) with trimethylsilyl groups results in higher fractional free volume(FFV). In this work, taking into account the complimentary features of BPSf and TMSPSf, BPSf/TMSPSf blend was prepared and the compatibility in mixing are examined. The BPSf/TMSPSf blend shows higher permeability than commercial PSf, with minimum loss of selectivity. The miscibility of the BPSf/TMSPSf blend is confirmed by the single glass transition temperature.
Lee, Jung Moo;Lee, Myeong Geon;Kim, Se Jong;Koh, Hyung Chul;Nam, Sang Yong
Membrane Journal
/
v.25
no.3
/
pp.223-230
/
2015
We synthesized novel polyimides with high gas permeability and selectivity for application of gas separation membrane. 2,2-bis(3,4-carboxylphenyl) hexafluoropropane dianhydride (6FDA) and two kinds of amines with high permeability and solubility were used to prepare the novel polymide. 2,4,6-Trimethyl-1,3-phenylenediamine (DAM) was used to improve gas permeability and 4,4-Methylenedianiline was used to improve the gas selectivity respectively. The polyimide copolymers were synthesized by commercial chemical imidization method using Triethylamine and Acetic anhydride and their average molecular weights were over 100,000 g/mol. The glass temperature (Tg) and the thermal degradation temperature were characterized using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The synthesized copolymers showed high Tg over $300^{\circ}C$ and high thermal degradation temperature over $500^{\circ}C$. The gas permeation properties were measured by time-lag equipment. Although general polyimides showed very low gas permeability, synthesized polyimide copolymer showed high $O_2$ permeability of 10.1 barrer with high $O_2/N_2$ selectivity around 5.3. From this result, we confirm that these membranes have possibility to apply to gas separation membrane.
Lee, Jung Moo;Lee, Myung Gun;Kim, Deuk Ju;Nam, Sang Yong
Membrane Journal
/
v.24
no.4
/
pp.325-331
/
2014
We synthesized novel polyimides with high gas permeability and selectivity for application of on board inert gas generation system (OBIGGS). 2,2-bis(3,4-carboxylphenyl) hexafluoropropane dianhydride (6FDA) and two kinds of amines with high permeability and solubility were used to prepare the novel polymide. 2,3,5,6-Tetramethyl-1,4-phenylenediamine (TMPD) was used to improve gas permeability and various kinds of diamines were used to improve the gas selectivity respectively. The polyimide copolymers were synthesized by commercial chemical imidization method and their average molecular weights were over 100,000g/mol. The glass temperature ($T_g$) and the thermal degradation temperature were characterized using differential scanning calorimeter (DSC) and thermogravimetric analysis (TGA). The synthesized copolymers showed high $T_g$ over $300^{\circ}C$ and high thermal degradation temperature over $500^{\circ}C$. The gas permeation properties were measured by time-lag equipment. Although general polyimides showed very low gas permeability, synthesized polyimide copolymer showed high $O_2$ permeability of 36.21 barrer with high $O_2/N_2$ selectivity around 4.1. From this result, we confirm that these membranes have possibility to apply to OBIGGS.
Journal of the korean academy of Pediatric Dentistry
/
v.33
no.4
/
pp.710-716
/
2006
The purpose of this study is to evaluate the intravenous (IV) sedation technique with midazolam and ketamine for uncooperative dental child patients. Three child patients between the ages of 4.4 years and 5.6 years who required sedation for dental treatment were given midazolam and ketamine. Initial dosage was combined of $0.03{\sim}0.06mg/kg$ midazolam and 1.0mg/kg ketamine. Additional dosages of ketamine (0.33mg/kg) were given as needed to maintain deep sedation. Pulse rate, respiratory rate, blood pressure, oxygen saturation, adverse reactions, postoperative recovery and behavior were monitored with saturation pulse oximetry, ECG, NIBP and Cardiocap. In conclusion, the combination of midazolam and ketamine is efficacious in deep sedation for painful dental treatment. However, a significant drop in oxygen saturation was observed as a common adverse side effect. Therefore advanced airway management proficiency is required in order to achieve a successful IV sedation.
Proceedings of the Korean Vacuum Society Conference
/
2014.02a
/
pp.397.2-397.2
/
2014
유기 발광 다이오드 (OLED)의 상용화를 위해 해결해야할 기술적 문제 중하나는 장수명이다. OLED에 적용된 유기물 층은 수분과 산소에 취약하여 소자 수명을 단축하는 요소로 작용하는데, 이를 해결하기 위해 유기물을 보호하며, 유기물 내로 침투되는 수분과 산소를 제어하기 위한 보호 층의 증착이 필수적이다. 필수적이다. 본 연구에서는, 사이클 화학 기상 증착법(C-CVD)을 이용하여 SiN/SiCN/SiN 구조의 무기 박막을 증착하여 유기물 보호층으로서의 적용 가능성을 제시하고자 한다. 이 때 각층의 두께는 각 각 10 nm이다. 증착된 다층 무기 박막은 비정질 상으로 수분 침투 보호막으로서 적당하다. 다층 무기 박막의 수분에 대한 저항성은 칼슘을 이용한 투과도 변화를 이용하여 측정하였다. 칼슘을 이용한 투과도 측정을 위해 고분자 PEN 필름위에 칼슘을 60nm 두께로 증착 시키고, 이어서 무기물인 SiN/SiCN/SiN의 다층 박막을 확산 방지층으로 증착 하였다. 제작된 소자는 온도 $85^{\circ}C$, 상대습도 85%의 가혹 조건에서 시간에 따른 표면 변화 및 투과도의 변화를 측정하였다. SiN/SiCN/SiN 구조를 갖는 무기 박막 층의 투습도는 3000시간까지는 $3.2{\times}10-5g/m/day$를 유지하였다. 이는 OLED 소자의 상용화를 위한 요구 조건에 근접한 값이다. 그러나 투습도는 측정 시간이 6000시간이 지난 후에 급격 증가하는데 이것은 30nm 두께의 SiN/SiCN/SiN의 확산 방지층에 임계 수명이 존재 한다는 것을 의미 한다고 할 수 있다. C-CVD 기술에 의해 제조된 다층 무기 박막 보호 층의 경계면에서 각 층간의 intermixing 현상이 관측되었으며, 이는 무기물 층의 결함과 핀 홀을 통해 내부로 확산 되는 수분의 침투 경로를 효과적으로 제어할 수 있는 방법이다. 본 연구 결과는 유연 기판 상에 제작된 OLED 소자에 적용 가능한 기술로서 소자 수명의 연장 뿐만 아니라 경량화에도 기여할 수 있는 기술이다.
Proceedings of the Korean Vacuum Society Conference
/
2011.02a
/
pp.497-498
/
2011
나노입자는 벌크 재료와는 다른 광학적, 전기적, 촉매적 특징 때문에 최근 많은 연구가 이루어지고 있다. 나노유체의 성질은 나노입자의 크기와 형상, 분산성등과 같은 여러 요인에 의해서 결정되어진다. 이러한 나노입자의 특징 때문에 여러 응용분야에서 활용되어지고 있다. 예를 들면, 일반 유체에 나노입자를 분산시키면, 열전도도와 대류열전달효과가 증대되어 진다. 이러한 나노유체의 제조법으로는 크게 두 가지로 분류되어 있다. 투스텝법은 환원법 혹은 기계적으로 제작한 나노입자를 일반 유체에 혼합시킨 후 분산을 시켜 제조하는 제조법이다. 원스텝법은 투스텝법과는 달리 한번에 나노유체를 제조하는 제조법이다. 일반 유체에서 나노유체를 제조함과 동시에 분산을 시켜서 제조한다. 최근, 유체내에서 나노유체를 제조함과 동시에 분산을 시켜 나노유체를 제조하는 새로운 기술인 유체 플라즈마법이 개발되었다. 하지만, 유체 플라즈마의 일반적인 거동과 해석이 명확하게 규명되지 않은 상태이다. 본 연구에서는 유체 플라즈마의 발생 메카니즘 규명을 위한 방전 시간, 전압, 단극 직류 전력, 극간거리에 따른 유체 플라즈마의 특징을 OES와 오실로스코프를 이용하여 측정하였다. 또한, 제조된 나노유체의 특징을 UV-vis nir spectropgotometer, HR-TEM, zeta-potential, EDS, ICP-OES, KD2 pro and lambda로 측정하였다. 유체 플라즈마를 각 조건에 따라 발생시켰고, 나노유체를 성공적으로 제조하였다. 유체 플라즈마의 주요 발생 원소는 산소와 수소이온으로 측정되었다. 유체 플라즈마의 강도는 전기에너지가 증가함에 따라서 증가함으로 측정되었다. 제조된 나노입자의 크기는 유체 플라즈마의 강도가 증가함에 따라서 감소하였고, 대부분의 나노입자의 형상은 구형으로 제조되었다. 나노유체의 분산안정성 또한 유체 플라즈마의 강도가 증가함에 따라서 증가하였다. 직경이 $18.1{\pm}5.0$ nm인 나노유체의 열전도도는 3%로 측정되었다. 유체 플라즈마에 의한 나노유체의 제조 메카니즘을 다음과 같이 제안한다. 유체내에서 전기에너지 인가에 따른 이온과 전자의 흐름은 유체 플라즈마를 발생시킨다. 기본 유체는 물이므로 유체 플라즈마의 주요 발생 원소는 수소와 산소이며, 인가되는 전기에너지량이 증가함에 따라서 이온과 전자의 흐름이 증가됨으로서 유체 플라즈마의 강도가 증가함으로 추측한다. 유체 플라즈마 발생은 전자의 흐름과 관계되어진다. 따라서, 유체내에 존재하는 전구체에 전자가 제공되어짐에 따라서 금 입자를 환원시켜 입자가 형성된다. 또한, 유체 플라즈마는 나노입자를 음전하로 대전시켜 분산안정성의 확보가 되는 것으로 추측되어진다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.