• Korean Journal of Optics and Photonics
• /
• v.7 no.3
• /
• pp.227-231
• /
• 1996

The reflection spectrum of a $2H-PbI_2$ single crystal grown by vapour phase method were measured at 10 K near the fundamental absorption edge. The n= 1,2,3 Wannier exciton series and $A_{EP}$ reflection line were obtained from the reflection spectrum. Based on the 2nd phonon energy in the Raman spectrum, which is different from Nagamune's report, we suggest that $A_{EP}$ line is due to the bound state between the n=2 exciton and the 2nd phonon which surmise that this is LO phnon due to the second Raman process. The L-T splitting energy of n=1 exciton line was 6.56 meV and was consistent with the emission spectrum. The temperature dependence of the reflection spectrum showed that n=1 exciton peak was shifted to longer wavelength while, as the temperatre is raised, the sharpness of that with the increase of the L-T splitting energy decrease. From Wannier exiton series, the exciton binding energy and exciton radius was 30 meV and 14$\AA$, respectively.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.6
• /
• pp.561-567
• /
• 2011

The inverse radiation analysis of a two-dimensional irregular configuration using unstructured triangular meshes is presented. In this study, an enclosure filled with an absorbing, emitting and scattering medium with diffusely emitting and reflecting opaque boundaries is considered. The finite volume method is applied to solve the radiative transfer equation in order to simulate the measured incident radiation values which are used as input data for the inverse analysis. The conjugate gradient method is adopted for the estimation of wall emissivities by minimizing the objective function at each iteration step. To verify the performance of the unstructured grid system, we compare the results with those using a structured grid system for the two-dimensional lopsided shape. The effect of measurement errors on the estimation accuracy is also investigated.

• Journal of the Society of Naval Architects of Korea
• /
• v.39 no.2
• /
• pp.11-18
• /
• 2002

In this paper, the method calculating hydroelastic responses of very large floating structure close to a breakwater in waves is presented. The source-dipole distribution method is used to calculate the generalized radiation problem considering breakwater effects and the diffraction problem is analyzed by using the source-dipole distribution andvelocity potential continuation method. The response of a VLFS is approximated by anexpansion in terms of a free-free beam. Calculated model is a VLFS with 1000m in length in a sea with a straight breakwater. The vertical displacements and bonding moments around a VLFS are calculated by variations for distance between a VLFS and a breakwater and incident wave angle to know the effect of a breakwater.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.138-143
• /
• 1994

A speckle correlation method was applied to measure the in-plane translation of a diffuse object which has rough surface using a linear CCD sensor and personal computer. Displacement of a speckle pattern produced from the object illuminated by a laser beam was measured by the cross-correlation functions between the I-D speckle profiles before and after the object translation, which were measured by linear CCD array sensor to be sent to IBM 386 personal computer. The sensitivity of the measurement was dependent on the radius of the wavefront curvature of incident beam as well as the spatial resolution of linear CCD array. A linear CCD array had 15 Jlffi pitch and 1728 pixels. The ratio of the speckle displacement and object translation varied from 1.03 to 5.20. The object translation of $3\mu\textrm{m}$ can be measured br the linear CCD sensor of which pitch was $15\mu\textrm{m}$, when the ratio of the speckle displacement and object translation was 5.20.s 5.20.

• Korean Journal of Ecology and Environment
• /
• v.33 no.4 s.92
• /
• pp.395-404
• /
• 2000

The gonadosomatic index (GSI), hepatosomatic Index (HSI), egg size distribution, gonad development and reproductive characteristics of venus fish, Aphyocypris chinensis, were examined during March 1997- March 1998 in agricultural waterways of the Sedo-myun, Puyo county, Chungnam Province, Korea. Annual reproductive cycle was classified into the following five successive phases by monthly changes in GSI and the characteristics of ovary: quiescent phase (January- February), secondary growing and mature phase (March-May), ripe and spawning phase (June-July), degenerating and resting phase (August-September) and primary growing phase (October-December). The hepatosomatic index (HSI) showed clear seasonal pattern with two separate peaks. However, it exhibited a negative correlation to changes of GSI values. The regression analysis suggested that fecundity showed a strong positive linear relationship ($r^2\;=\;0.91$, n = 34) with body weight. The sex ratio of female to male was 1.4 : 1 in the natural population during the study. The minimum reproductive size of female and male venus fish was 38 mm and 33 mm in fork length, respectively.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.6
• /
• pp.455-471
• /
• 2013

Active sonar has been commonly used to detect targets existing in the shallow water. When a signal is transmitted and returned back from a target, it has been distorted by various properties of acoustic channel such as multipath arrivals, scattering from rough sea surface and ocean bottom, and refraction by sound speed structure, which makes target detection difficult. It is therefore necessary to consider these channel properties in the target signal simulation in operational performance system of active sonar. In this paper, a monostatic active sonar system is considered, and the target echo, reverberation, and ambient noise are individually simulated as a function of time, and finally summed to simulate a total received signal. A 3-dimensional highlight model, which can reflect the target features including the shape, position, and azimuthal and elevation angles, has been applied to each multipath pair between source and target to simulate the target echo signal. The results are finally compared to those obtained by the algorithm in which only direct path is considered in target signal simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.1
• /
• pp.21-30
• /
• 2018

A passive time-reversal technique can improve error performance of the underwater communication system by reducing influence of inter-symbol interferences, which is caused by a multipath channel response. The passive time-reversal communication system equipped with numerous receivers generally can obtain superior error performance since larger diversity gain can be obtained as the number of available received signal increased. In this paper, we analyze the optimal number and combination of receivers that can approximately achieve the best error performance when using the limited number of receivers. For this analysis, we use communication data collected during SAVEX15 (Shallow-water Acoustic Variability Experiment 2015) carried out in the south-western part of Jeju Island from May 14 to May 28, 2015. Analysis results show that there are depths of energy concentration due to the channel characteristics in which the underwater sound channel are present, and the passive time-reversal technique using the limited number of the receivers can derive near-optimal communication performance if the receivers for time-reversal processing are located at the depths where energy is concentrated.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.5
• /
• pp.295-303
• /
• 2015

The eigenfunction expansion method is appled for the wave scattering by a vertical slotted, where both the inertial and quadratic drag terms are involved. Quadratic drag term representing the energy loss is linearized by the application of socalled equivalent linearization. The drag coefficient, which was empirically determined by Yoon et al.(2006) and Huang(2007) is used. Analytical results are verified by comparison to the experimental results conducted by Kwon et al.(2014) and Zhu and Chwang(2001). Using the developed design tool, the effect of energy loss by a vertical slotted wall is estimated with various design parameters, such as porosity, submergence depth, shape of slits and wave characteristics. It is found that the maximum value of energy loss across the slotted wall is generated at porosity value less than P = 0.1. The present solutions can provide a good predictive tools to estimate the wave absorbing efficiency by a slotted-wall breakwater.

• Economic and Environmental Geology
• /
• v.27 no.5
• /
• pp.491-498
• /
• 1994

The integral equation method is used for magnetotelluric (MT) modeling of a finite inhomogeneity in a two-layered earth. An integral equation relates the incident plane-wave field and the scattering currents in the three-dimensional (3-D) inhomogeneity through the electric tensor Green's function appropriate to a layered earth. This paper describes an effect of overburden and basement on MT responses of 3-D body. The effect of overburden is to reduce the detectability of target, and the reduction of detectability is more apparent for conductive overburden than for resistive one. The effect of basement, on the other hand, may enhance the anomaly due to 3-D body in the upper layer. In case of the resistive basement current perturbations about the body tend to be confined to the more conductive upper layer.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.1
• /
• pp.69-75
• /
• 2016

In this paper, we propose a inverse synthetic aperture radar(ISAR) rotational motion compensation(RMC) method to remove residual blurring caused by non-uniform rotational motion of a target. First, a range bin having an isolated scatterer is selected. Next, polynomial phase signal in the selected range bin is estimated by using both Fourier transform(FT) and polynomial-phase transform(PPT). Finally, a new slow time variable that uniformly samples radar signal along the aspect angle directions is defined by using the estimated phase signal, and we interpolate radar signal in terms of the new time variable. As a result, rotational motion to blurr ISAR images is removed, and focused ISAR images are obtained. Simulation results using battleship model validate the robustness and effectiveness of our proposed RMC method.