• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1225-1231
• /
• 2003

In this paper, we present the analysis of electromagnetic scattering from arbitrarily shaped three-dimensional conducting objects coated with dielectric materials. The integral equation treated here is the combined field integral equation(CFIE). The objectives of this paper is to illustrate that only the CFIE formulation is a valid methodology in removing the interior resonance problem, which occurs at a frequency corresponding to an internal resonance of the structure. Numerical results of radar cross section for coated conducting structures are presented and compared with other available solutions.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.2
• /
• pp.36-43
• /
• 1991

Acoustic backscattering from a buble column in water was studied theoretically and experimentally. For theoretical analysis a general scattering theory was used by assuming the bubble column to be lumped element scatterer which can be characterized by its shape, void fraction and dimensions. When the void fraction is less than 1% and the incident frequency is higher than individual bubble resonance frequencies, the experimental results show that the acoustic backscattering from a bubble column depends mainly on the void fraction rather than the individual bubble sizes. It was also theoretically and experimentally observed that the acoustic backscattering levels were increased and their peaks moved to the lower frequency regin by raising the void fraction of bubble column.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.656-663
• /
• 2007

In this paper, when a E-polarized plane wave is incident on the grating consisting of tapered resistive strips, electromagnetic scattering is analyzed using the method of moments(MoM). The induced current density of each resistive strip in a grounded double dielectric layer is expected to blow up at both edges. To satisfy this, the induced surface current density is expanded in a series of Chebyshev polynomials of the second kind. The scattered electromagnetic fields are expanded in a series of Floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for several resistivities are obtained.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.161-164
• /
• 1998

광대역 주파수 상에서 외부로부터 입사하는 전자파를 산란시키지 않고 유전체 내부에서 흡수시키기 위해 유전체를 다층으로 배열하여 전파 흡수체를 최적 설계하고자 한다. 수직 및 여러 각도로 전파가 입사하는 경우 각 유전층의 두께, 유전 상수, 손실 탄젠트 등의 설계변수를 유전자 앨거리즘을 이용하여 최적화한다. 다극함수에서의 부분 초기화 유전자 앨거리즘의 성능 향상을 위해 부분 초기화율, 부분 초기화 시점, 스케일 인자의 변화에 따른 성능을 비교, 개선하여 흡수체 설계에 적용하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.2
• /
• pp.187-195
• /
• 1999

A series feedback DRO operating at 3.2 GHz applicable to the spectrum analyzer as the second local oscillator, is designed and fabricated. We can obtain a low noise by utilizing the small signal S-parameter of the transistor and adjusting the reflection coefficient from the coupling coefficient between dielectric resonator and microstrip line. The results show that output power is 10.50 dBm, a stable low phase noise is -116 dBc/Hz at a 10 kHz offset frequency and a harmonic characteristic is 19.33 dBc.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.3
• /
• pp.449-459
• /
• 1999

The scattering problems from electromagnetic absorbers can be greatly simplified using the transmission line approximations (TLA) and effective medium theory. This method has been widely used for the absorber design because of its very simple calculation and intuitional approach, while numerical analysis needs the tremendous computation requirements, This paper examined the accuracy and limitations originated by the intrinsic approximation limits of TLA by comparison with FEM results for various absorber design examples. It was found that the TLA result is valid when λ $\geq$ 2p, where λ is the wavelength of the interested upper frequency and p is the distance between two periodic cone arrays. Therefore, the electromagnetic absorbers having high material properties and big base-area commonly do not meet this condition, and the electromagnetic scattering from those absorbers must be evaluated by the numerical analysis in those cases.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.8
• /
• pp.671-678
• /
• 2002

High-frequency monostatic reverberation model (HYREV: HanYang Univ. REVerberation model) suitable for shallow-water environment is presented. It is difficult to predict reverberation signals in shallow water due to scattering from sea surface and seafloor. The arrival times and transmission losses from the source to scatterers are obtained from the eigenrays. The composite roughness theory is used to predict the boundary scattering. The signals generated by the HYREV and the GSM were compared with the observed signals and it is showed that the HYREV model provided a closer fit to the observed signals than those obtained using the GSM.

• Nuclear Engineering and Technology
• /
• v.4 no.1
• /
• pp.39-45
• /
• 1972

In neutron shielding, the scattering effect is equally important as the attenuations in shielding materials. In the present study, the scattered dose equivalent was measured using a Rem counter for water, paraffin, borated paraffin, ordinary and heavy concrete, lead, iron, and tissue equivalent material in three different angles: 45$^{\circ}$, 90$^{\circ}$, and 135$^{\circ}$, respectively. The measurements were performed for the neutron, having the energies of 0.5, 1, 2, 5, and 18 MeV, which are produced from the Van do Graaff accelerator. The scattered dose equivalent ratios were increased with increasing the thickness of scattering materials and saturated at a certain thickness although they were different from one to other materials under study. The ratios were large for lead and iron while they were small for the hydrogen containing materials such as water and paraffin etc.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.4
• /
• pp.47-54
• /
• 1991

본 논문에서는 전자파 해석에 관련된 기존의 해석 기법들을 간략하게 비교, 검토하고 GTD / UTD를 기본으로하여 고주파 해석 기법에 관련된 몇가지 문제들을 다룬다. 전자파 해석이란 전자파의 복사(radiation), 산란(scattering) 및 결합(coupling)에 관련된 문제의 해석을의미 한다. 전자파 해석은 여러 목적을위해 응용되고 있으며 EMC / EMI문제의 분석 및 대책 수립에도 응용될 수 있다. EMC / EMI 문제의 근원은 전자파의 간섭(interference) 현상이다. Emitting source로부터 복사(radiation)되는 간섭파는 여러 경로를 통해서 receptor로 coupling된다. 일반적으로 emitter와 receptor사이에는 여러 복잡한 구조물이 산란체로 작용하고 있으므로, emitter와 receptor사이의 직접경로(direct path)를 통한 coupling과 함께 구조물에 의한 전자파의 반사 및 회절을 통한 간접경로(indirect path)의 coupling도 고려되어야 한다. 따라서 EMC / EMI문제는 자유공간(free space)상에 있는 antenna 사이의 송수신 문제보다 매우 복잡하고 정확한 couplin의 계 산에 적지않은 어려움이 있다. EMC / EMI대책수립은 일차적으로 coupling path의 차단을 통해서 가능하므로 전자 파의 coupling path의 분석과 전자파의 복사 및 산란 mechanism에 대한 해석이 필수적이다.

• Korean Journal of Optics and Photonics
• /
• v.16 no.6
• /
• pp.560-564
• /
• 2005

We used the polarized light scattering spectroscopy(PLSS) to get selectively the particle size information on a surface in optically diffuse material, and we analyzed the experimental results by Mie scattering theory. We found that the PLSS was the proper method fer getting the surface information in optically diffuse material. This method is able to be used in biotechlology area for diagnostics.