• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.7
• /
• pp.4411-4417
• /
• 2015

The proper design of the gate location for injection molding of plastic goods is obtained from three-dimensional injection molding analysis for various design alternatives. This paper is study on effect of gate location in injection molding. It have a decisive impact on productivity and quality of plastic goods. This objectives of this paper is to analysis effect of hot runner gate location for resin filling, weld line, injection pressure to manufacture of automobile air cleaner upper case with injection molding machine. Thus, to analysis these problems in this paper, location of gate are gave variety in 4 CASEs. In this paper, the CAE simulation considering each variations in location of gate is performed to predict the cause of faulty which appears in the injection molding process.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.7
• /
• pp.771-777
• /
• 2014

Injection-compression molding was used for film insert molding of an automotive door grip using films with three-dimensional embossed patterns. A vacuum mold was fabricated for vacuum-assisted thermoforming of the film, and an injection-compression mold was developed for film insert molding. Three pressure transducers were installed inside the mold cavity to measure cavity pressures. Injection-compression molding experiments under various compression strokes and toggle speeds were performed to investigate their effects on the cavity pressure and heights of the embossed patterns. The compression stroke of 0.9mm and low toggle speed resulted in a higher degree of conservation of embossed patterns. Additionally, the processing conditions for the maximum heights of embossed patterns were almost similar to those for minimum integral value of cavity pressures. The injection-compression molding process presents the opportunity to impart a soft-touch feeling of plastic parts printed with embossed patterns.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.414-419
• /
• 2016

A study of a precision test according to the control method of an injection molding machine was carried out. The effects of the screw stroke, holding pressure, melt temperature on both the hydraulic and electric injection molding machine were examined. In addition, hypothesis testing was performed to determine the deviation of the data obtained in the experiments. The conclusions obtained in this study were as follows. Significant deviations in the screw stroke, melt temperature and holding pressure occurred in that order. The hydraulic type showed significantly more variation between the products compared to the electric type. In addition, using a mini tab from the statistics program, a hypothesis was proposed and the P value of the injection stroke, holding pressure, melting temperature injection stroke and melting temperature had adopted a null hypothesis ($H_0$). The holding pressure, which showed mutual differences, adopted an alternative hypothesis ($H_1$).

• Clean Technology
• /
• v.11 no.4
• /
• pp.205-211
• /
• 2005

There have been many technologies and materials proposed for realizing microlens array, and plastic injection is recognized as the most promising one because of several merits such as optical properties, impact resistance, formability, lightening and environmental adaptability. Since PR reflow for injection template fabrication enables the lens shape control easier, and the sample technology more effective for mass production, it lowers the cost, enhances integration, and reduces process steps, which leads to be environmentally benign. However injection of polymers may face the difficulty of formability depending on their properties. In order to overcome the difficulty, fast heating/cooling technology was introduced in this study, and microlenses were fabricated and evaluated. template obtained by PR reflow method was heated and cooled fast during injection to fabricate microlens array. PC and PMMA polymer materials were compared, and it was realized that PMMA showed much better formability due to its lower melting temperature. Injection parameters of pressures and velocities were driven out for injection optimization.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.514-517
• /
• 2011

본 연구에서는 사각형태 화장품 케이스 사출성형 시 발생되었던 수지 미성형 불량을 해결하기 위하여 사출성형해석 기술을 통해 성형품 형상변경 및 사출금형 내 유동 시스템 수정방안 도출을 수행하였다. 대상제품인 사각형태 화장품 케이스는 상측부 케이스로서 케이스 외관에 게이트 및 취출흔적이 남지 않아야 함에 따라 측면부 게이트 적용으로 유동거리가 길어져 미성형 불량이 다수 발생하는 제품이다. 따라서, 수지 유동성 향상과 더불어 효율적인 보압전달을 통하여 수지 충전 및 변형발생 저감을 위하여 성형품 형상변화 및 유동시스템 변화에 따른 사출성형해석을 수행하고 결과를 고찰하였다. 이로써 최종적으로 수지 미충전으로 인한 미성형 불량을 제거하고 성형품 변형을 줄일 수 있는 수지유동시스템 수정방안을 제시하였다.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.263-272
• /
• 2004

Using computer simulation, the processibility and properties of the inst겨ment panel of automobile produced by gas injection molding were predicted and evaluated. The P-V-T data of ABS, resin were used in the gas injection molding process in order to estimate the mold filling phenomena. The optimum process conditions were found by adjusting the process parameters including pressure, filling time, the positions of gas channel and runner. The process was simplified and the final instrument panel produced by the gas injection molding was found to have improved dimension stability compared to the one produced by conventional injection molding.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.4
• /
• pp.53-59
• /
• 1990

To suggest the fundamental data for development of the soil improvement method which increases the permeability in aquifer by jet water, laboratory tests were performed. The results obtained are as follows : 1. The diameter of the improved section was maximum value when the time of water jetting was about 4 minutes, and it was not increased according as the time of water jetting was longer than 4 minutes. 2. It appeared that 2.78 mm in diameter of the nozzle was the most optimum size in the condition of using the 1/8 HP - pump and the diameter of improved section in that case was 15.9cm 3. According to removing fine - soil particles, the original soil was improved, suitable to the purpose of improving, and then the permeability of the improved soil was 100 times of that of the original soil. 4. As the improved soil was satisfied to the design criteria of filter materials, the improvement method in this study will be useful for constructing underground collecting channels or underground collecting drainage canals.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.70-71
• /
• 2002

연소실의 세장비(aspect ratio)가 작으면서 추진제의 고 충전을 이용한 단시간 연소 모타는 유도탄의 사출 모타 용으로 사용될 수 있다. 사출 모타는 일반적으로 모타 무게에 대한 제약 조건이 까다롭지 않기 때문에 무게 경량화에 대한 부담은 줄어들지만, 모타의 부피가 커지면 유도탄 발사 장치의 부피가 커지기 때문에 공간적인 측면에서 가능한 작게 하는 것이 시스템 전체의 효율을 증대시킬 수 있다. 또한 사출 모타의 연소 시간이 짧기 때문에(1초 이내) 추진제의 웹 두께가 작으므로 연소실의 주어진 공간에서 추진제를 많이 채우기 위한 방법으로 원통 튜브형 그레인을 여러 개의 다발로 사용하는 방법이 효과적이다. 이러한 관점에서 사출 모타용으로 다발 원통 튜브형 그레인을 설계/제작/연소시험을 하였더니 작은 저주파(약 10Hz)의 연소 불안정 현상이 발생하였다. (그림1). 이러한 주파수 대역은 일반적으로 잘 알려진 연소 불안정 모드 (longitudinal, tangential, and radial mode)와는 다른 아주 특이한 현상이다. 이러한 현상의 주 원인은 연소실 내 압력의 비평형에 의한 현상이라 판단되어 다음과 같은 연구를 수행하였다. 1) 그레인 튜브간의 압력 평형을 원활하게 하기 위하여 그레인에 구멍(홀)을 뚫어서 연소 안정화에 미치는 영향에 대한 연구(그림2), 2) 그레인에 홀을 뚫지 않고 격자와 격자간의 공간을 이용하여 그레인 간에 발생된 저주파의 압력 진동을 산란/소멸 시키는 연소 안정화 연구(그림3).

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.23-23
• /
• 2003

분말야금된 소결체의 가장 큰 특징 중의 하나는 피할 수 없는 소결체의 기공이다. 이러한 기공이 기계적 특성에 미치는 영향에 관해서는 많은 연구가 오래 전부터 진행되었었다. 그러나 기존의 연구는 거의 대부분 일반 분말야금에 의한 것이고 분말사출성형된 소결체의 기공율과 기계적 특성 광계는 거의 연구가 이루어 지지 않았다. 본 연구에서는 기공율의 조절이 용이한 분말사출성형 공정을 이용하여 소결 초기부터 완전 치밀화에 가까운 조직까지 다양한 소경율의 시편을 만들어 기계적 특성에 미치는 순수기공의 영향은 조사하기 위해 다음과 같이 조사하고자 하였다. 사출성형에 사용된 재료는 고강도 이며 내식성이 뛰어난 17-4 PH STS이고 평균 입경은 10mm였다. 열분해와 소결은 수소 분위기에서 행하였으며 소결온도는 900~$1350^{\circ}C$였다. 연구수행을 통해 다음과 같은 결론을 얻었다. 1. 기공율과 기계적 특성의 관계는 닫힌 기공이 지배하는 고밀도 영역과 열린 기공이 지배하는 저밀도 영역을 분리하여 해석해야한다. 2. 저밀도 영역에서의 기공율과 강도의 관계는 넥 성장에 따른 load bearing area의 증가로 나타낼 수 있고 아래와 같다. $\frac{\delta}{\delta_o}=1-\frac{P}{P_i}$ 3. 고밀도 영역에서의 기공율과 강도의 관계는 소결 현상과 초기 충진율을 고려한 ideal pore모델을 도입하였고 아래와 같이 나타났다. $\frac{\delta}{\delta_o}=1-1.95(P_i\;{\cdot}\;P)^{2/3}$

• Composites Research
• /
• v.17 no.4
• /
• pp.47-52
• /
• 2004

This paper established the procedure to fabricate the MWNT/PMMA nanocomposite by using together with injection molding and film casting processes. The fabrication process made it possible for MWNTs to be well dispersed in the PMMA matrix and also it could maintain the well-dispersed state effectively. And the mechanical material properties and SEM images of the fractural surface were observed. Moreover, a surfactant was used to disperse MWNTs more effectively and mechanical material properties were also investigated.