• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.4 no.3
• /
• pp.183-188
• /
• 2003

Non-molding and welding line happen by the assembly of gas at the connector terminal. There is not good phenomenon of burr by increasing the over injection pressure, the temperatures of die and resin to prevent from them. Therefore, the connector mold to apply the vacuum molding system is developed in this study. The vacuum pressure is controlled systematically with the optimum conditions in the important ingredients of injection molding that are the temperatures of melting resin and die and cooling condition. The badness in charging is cleared by making a vacuum to non-charging part of the deep bottom part of each cavity. And the vacuum system to reduce the cycle time is applied as the study envelopment of molding work. So, the good product and the productivity improvement can be obtained in this study.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.75-76
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.491-492
• /
• 2013

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.40-44
• /
• 2014

As a rotating machine element, plastic gears are more and more widely used in such as industrial machine element, since plastic gear is lighter, higher wear-resistance, and higher vibration absorbing ability than metal gears. When operating plastic parts, tooth breakage and fatigue life shortened due to increasing number of applying load and tooth flank temperature rising, such that accuracy of plastic gears is divided from allowable range to cause vibration and noise. On this study, a internal plastic gears are developed which improved the filling balance molding process by a new injection mold structure. The new mold structure called HR3P(hot runner type 3plate mold). As the result from this studies, we obtained a very accurate roundness internal gears by using design of experiment.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.129-133
• /
• 2008

As a rotating machine element, plastic gears are more and more widely used in such as industrial machine element, since plastic gear is lighter, higher wear-resistance, and higher vibration absorbing ability than metal gears. When operating plastic parts, tooth breakage and fatigue life shortened due to increasing number of applying load and tooth flank temperature rising, such that accuracy of plastic gears is divided from allowable range to cause vibration and noise. On this study, a internal plastic gears are developed which improved the filling balance molding process by a new injection mold structure. The new mold structure called HR3P(hot runner type 3plate mold). As the result from this studies, we obtained a very accurate roundness internal gears by using design of experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.42-47
• /
• 2017

In this study,we conducted an injection molding analysis of metal powder materials for the development of flanges, which are necessary adapters for optical communication. The metal powder injection molding process is a technique for producing an injection molded article having a complicated shape by mixing ceramic or stainless powder and binders. It is used to produce products which require complex processing technology or for which the productivity is low. The purpose of this study is to minimize the manufacturing processing of products which are manufactured through existing mechanical processing procedures. For the injection molding analysis, we mixed stainless STS316 metal powder with binders at a ratio of 6 to 4 to make molding materials consisting of granular pellets. Then, three-dimensional modeling and meshing were carried out to obtain the optimal injection molding analysis conditions(molding temperature, melting temperature, injection time, injection temperature, injection pressure, packing time and cooling time). As a result of the analysis, it was discovered that the inlet became available 13.29 seconds after the first injection. Also, as the flowing and packing in the melt through the sprue, runner and gate were stable, it is expected that good molds can be manufactured.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.4
• /
• pp.1361-1366
• /
• 2010

This research aims to develop polymer composites which can be used for PEMFC separators by injection molding process. Considering the moldability and stiffness, we used PPS(Poly(phenylene sulfide)) and PP(Polypropylene) as base resin. In order to improve electrical conductivity and physical properties, we chose glass fiber, carbon fiber, carbon black, and both expanded graphite and synthetic graphite. The 3 type composites are prepared for injection molding of PEMFC separators. and CAE(Computer Aided Engineering) analysis was conducted to optimize injection processing parameters(injection pressure, heat time, mold temperature etc.). We did successfully fabricate the separators by injection molding, and measure the electrical conductivity of the samples by using four point probe device. Conclusively, PP/SG/CB composite showed better both electrical conductivity and moldability than the others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5352-5356
• /
• 2013

Plastic product manufacturing industry has usually focused on a mechanical and physical characteristics of molding. Recently, not only these characteristics but also the aesthetic value is significantly considering. Especially, the molding's gloss, which we can easily distinguish, is an important aesthetic point. In this study, it were investigated that the gloss variation of ABS moldings by changing injection conditions such as injection pressures, injection speed, holding pressures melt and mold temperatures by injection molding experiment. The experimental results revealed that the holding pressure was the most active condition on gloss of ABS molding.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.111-114
• /
• 1992

과거 사출금형 설계 및 성형은 대부분의 단편적인 경험에 의존하여 왔으며 이는 단납기, 고품질화에의 대응에 있어서 가장 큰 문제점중의 하나로 인식되어 왔다. 그러나 최근에는 컴퓨터의 성능이 급격히 향상되고 보편화되면서 대기업을 선두로 한 컴퓨터 시뮬레이션이 활발히 응용되고 있으며 이는 앞으로 더욱 활성화될 전망이다. 본 연구에서는 사출성형 자동평가 시스템을 개발하였으며 이는 전처리 모듈, CAE해석 모듈 및 자동분석 모듈, 후처리 모듈등으로 구성되어 있다. 본 시스템에서는 주입장치 설계 표준 DATA BASE가 구축되어 있으며 특히 설계자가 설계 및 성형조건에 대한 기준만 정의하면 그 이후의 모든 평가 및 최적조건이 자동으로 계산, 도출될 수 있도록 하였다. 이번에 개발한 시스템에서의 핵심기술은 수치해석을 응용한 고분자 가공공정해석기술, 최적화 기술, DATA BASE구축기술 그리고 컴퓨터 그래픽 기술 등으로 위에서 언급한 바와 같은 사용시스템이 갖고 있는 현장 활용시 문제점들을 근본적으로 해결하여 차별화 시킨 것이다.

• Proceedings of the KAIS Fall Conference
• /
• 2001.11a
• /
• pp.139-143
• /
• 2001

In injection molded parts, the ribs require more complicated mold cavities and cores. But it is necessary for the parts to attach the ribs for assembly, moldability and other functional purposes. To design them appropriately considering structural strength and injection molding, the profound knowledge that includes moldability, causal effects on the properties of the part is needed. This paper describes the design methodology which enables easy, simple, time and cost-effective design for the features.