• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.6 no.2
• /
• pp.34-41
• /
• 1988

Nowadays the considerable improvements, not only in photogrammetric equipment but also in adjustment methods have led to a high accuracy of Aerial Triangulation and reach the step to obtain A.T. technique that uses Global Position System without ground control survery. The enterance of analytical plotter have made considerable development both in accuracy and in efficiency and improved working environment of A.T. by the combination of On-Line Analytical Plotting System. In this paper, in A.T., with using of analytical polotter, aims to improve the acccuracy in coordinates determination of low level control point. The result shows that in case of A.T. with analytical plotter AVIOLYT BC2, the accuracy of control points improves to 7% in planimetry and to 40% in height compared to A.T. with precision plotter Autograph A-8.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.123-133
• /
• 2005

This study has made photographing respectively by changing the converging angle by use of d7 $metric^5$ that is a measurement digital camera. And also in order to minimize the errors happened at the relative orientation, we have sorted out the round target that the relative orientation is automatically on the programming and have calculated RMSE by carrying out the bundle adjustment. We think that such a study could be used as very important basic data necessary in deriving the optimal photographic conditions by the close-range digital photogrammetry and in judging such a degree.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.2 s.40
• /
• pp.15-23
• /
• 2007

This paper presents a shoreline change analysis on a reclaimed land, using a pair of aerial photographs taken before and after the reclamation. Shorelines that are defined by a tide datum, i.e. Approximately Highest High Water Level, were mapped by both analytical and digital photogrammetric methods. The past shorelines were overlapped with digital cadastral map from which areas of retracted and protruded lands were computed. Magnitude of shoreline changes was estimated by calculating areas between the past and present shorelines. Comparisons in terms of areas showed a fairly good agreement between the two methods. However, particularly in the estuary of complex morphology, shoreline mapping by digital photogrammetric method requires images to be scanned at a resolution higher than 1200 dpi.

• Journal of Korean Society for Geospatial Information Science
• /
• v.17 no.2
• /
• pp.91-99
• /
• 2009

In the field of geospatial information, 3D shape information has been considered as a frame data for GIS. Many kind of physical shape information is, especially, required for the works related with space, such as planning, maintenance, management, etc. Conventional photogrammetry was implemented under the conditions with expensive metric cameras and analytical plotters operated by experts. Nowadays, however, the metric cameras and analytical plotters are replaced by low price non-metric digital cameras and personal computers by virtue of the progress in digital photogrammetry. This study aims to investigate the technology to easily and promptly produce 3D shape information required in geospatial information system using close-range photogrammetry with non-metric digital cameras. As the results of this study, 3D shape of an experimental object was made out with a common compact digital camera and only a known length of a line component in the object and the accuracy of the dimension of 3D shape was analyzed to be less than one pixel.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.49-57
• /
• 1986

Block adjustment procedures are usually classified into three groups according to the smallest units ; the bundle, the model, or the strip. In this paper, three dimensional analysis using a unit model in aerial photogrammetry is studied, and error distibutions are anayzed concerning the control patterns.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.2
• /
• pp.99-105
• /
• 1989

This paper shows the possibility to have a accurate record and analysis of all data of pre/post-environmental impact assessment. For the experimental test, a surveying was carried with aerial photos by non-metric camera of remote controlled model airplene, aeial camera, LANDSAT data. The three approaches are briefly described. Finally, author suggest an environmental impact assessment method using aerial photogrammetric method. This will lead to more accurate and effective method in the environmental impact assessment.

• Journal of the Korean Geographical Society
• /
• v.50 no.2
• /
• pp.217-237
• /
• 2015

Seokchon Lake, and the area surrounding it, have become symbolic with an environment of 'peace', 'delight', 'happiness', and 'healing' due to the large floating yellow rubber duck which sits within the lake. There exists, however, a hidden intention of a large corporation who wishes to make benefit of this installation and its healing properties. Nevertheless, the lake has become a hot destination for people to come and see the rubber duck and take romantic photos with it. The photographs taken and shared further expand the popularity and romantic environment of the duck and lake. This process is a perfectly hermeneutic circle. Self or group mediation through photographic performances with the rubber duck has allowed the lake to take on new meaning to visitors. For families taking photos together it has become a place of family bonding and love while for couples of any age it has been transformed into a place to express their love through pictures together with the duck. Even for selfie generation it has become a destination and muse. Tourists are not merely written upon, but are also enacting and inscribing places with their own stories. Therefore, photographic performances produce rather than consume and reflect geography of Seokchon lake.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.11 no.1
• /
• pp.7-18
• /
• 1993

In analyzing whole surface of non-topographic objects, the design of multi-station photogrammetric network must involve a number of questions such as geometric configuration of exposure stations, imaging geometry, control point configuration or weight allowance of adjustments. Above all, the surveying of the interior of narrow longitudinal structures needs the design of special photogrammetric network. The main objective of this paper is to suggest the schemes for solving difficult problems attendant upon whole inside-surface analysis of structure and to improve the accuracy and reliability of final measurements. For it, the multi-station exposure network suitable to shape and size of the inside of the structure was designed. Then three dimensional data were acquired by bundle adjustments derived from multi-station photos and the effects of network design factors on accuracy of measurements were contemplated. Also, the algorithm for detection of blunders was developed here is expected to lead to improvement of the reliability of photogrammetric solutions.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.139-146
• /
• 1987

The 3-dimensional deformation measurement by the terrestrial photogrammetry is consist of 3-dimensional coordinates computation, displaced point detection and deformation estimation of object targets. In this study, at the first step of deformation analysis, the variation of the variance-covariance matrix for the exterior orientation elements was analyzed by the increment of the ground control points and the photos in the Bundle adjustment. And then, to give the constraints for improving accuracy of ground control points, the concept of Free-Network adjustment was applied to Bundle adjustment. As a result, we knew that it was desired in the accuracy and the economy, the observation time when the numbers of ground control point and photo were respectively 6 points and 3 photos. In addition, in the case of applying the concept of Free Network adjustment in Bundle adjutment, it was desirable that the space distance for the constraints is distributed outside.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.2 no.1
• /
• pp.81-92
• /
• 1982

This study aimes at understanding the factors influencing poistion-determination by investigating the propagation of errors developed during orientation work in three-dimmensional coordinates of the aerial photograph. This paper treats the comparison and analysis of phopagation of errors due to computing orientation requited for the analysis of the absolute coordinate from the image coordinates of photograph.