• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.61-70
• /
• 1995

The purpose of this paper is to calculate the excavation volume of unequal interval grid using nonlinear boundary in eathwork volume determination for reclamation of the foreshore. A congruence area formula by first and third equation is compared with trapezoidal, simpson formulas to earthwork volume. And nonlinear spot level method of unequal interval grid is compared with linear and nonlinear spot level method of equal interval grid excavation volume. As a result algorithm of derived area and volume formula should provide a better accuracy than linear and nonlinear spot level currently in use. Practical application of each method to the excavation volume is illustrated by digital elevation model of aerial photogrammetry and model test of aquarium.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.151-152
• /
• 2009

This study suggested a friction type coupler designed to contact the male and internal screw groove together by tightening the outer nut formed along the inclined outside of the coupler. In order to tighten the outer nut conveniently, special openable wrenches were developed. To confirm the quality of this coupler, visual inspection method (counting the number of screw threads) was applied.

• 한국노년학
• /
• v.31 no.2
• /
• pp.303-315
• /
• 2011

The purpose of this study was to investigate effect of resistance training on BMD and bone metabolism related markers in aging rats. Thirty male Spraugue-Daweley rats were divided into sedentary (CON; n=10 ) non-load resistance trained(NLRTG; n=10), and load resistance trained(LRTG; n=10) groups at the age of 64 weeks. The rats in the resistance training groups((NLRTG and LRTG) performed the tower climbing exercise 4 times a week. The LRTG groups were conditioned to climb a vertical ladder with weights appended to their tail 4 days/wk for 12 wks. After 12 weeks of exercise, serum osteocalcin, bone mineral density (BMD), breaking force, ash, Ca, and P in the femur were measured. After training, serum osteocalcin (OC) was significantly (p < 0.05) higher in both LRTG and NLRTG when compared to Control. Right femur BMD was significantly (p < 0.05) greater for LRTG when compared to both NLRTG and Control with no significant difference between NLRTG and Conrtol. The breaking force of femur was significantly (p < 0.05) greater for LRTG and NLRTG when compared to Control. The Ash, Ca, content of femur were significantly increased in resistance training groups than control group. These results suggest that the increase in bone mineral density induced by resistance training is mediated by changes in bone microarchitecture as well as training intensity and osteocalcin.

• The Journal of the Korean dental association
• /
• v.54 no.7
• /
• pp.529-540
• /
• 2016

Objective: The objective of this study was to evaluate the osseointegration of narrow-diameter implant with trapezoid-shape and to evaluate the effect of coronal microthreads on trapezoid-shape narrow-diameter implant. Materials and Methods: The experimental narrow-diameter implants were classified into two groups according to absence or presence of coronal microthreads: trapezoid-shape narrow diameter implant (TN group) and trapezoid-shape narrow-diameter implant with microthreads (TNM group). They were installed alternately in bilateral mandible in three dogs. After 8 weeks, the animals were sacrificed. Resonance frequency analysis, removal torque test, and histometric analysis were performed. Results: Statistically higher implant stability quotient (ISQ) values were observed in TNM group than in TN group at the time of implant installation. However, significant ISQ values difference was not observed between groups at 8 weeks. Both groups showed significantly increased ISQ values at 8 weeks, compared to the time of implant installation. There was no significant difference between groups in removal torque test. Bone-implant contact ratio also showed no significant difference between groups in total and coronal part. Conclusion: Within the limitation of this study, it could be concluded that the trapezoid-shape design on narrow-diameter implant showed successful ossointegration, and the microthreads on coronal part did not result in significant bone-implant contact and biomechanical stability at 8 weeks.

• The Journal of the Korean dental association
• /
• v.56 no.5
• /
• pp.263-276
• /
• 2018

Long-term survival and prognosis of narrow-diameter implants have been reported to be adequate to consider them a safe method for treating a deficient alveolar ridge. The objective of this study was to perform case report of narrow-diameter implants with a trapezoid-shape in anterior teeth alveolar bone. A 50-year-old male patient presented with discomfort due to mobility of all of the maxillary teeth and mandibular incisors. Due to destruction of alveolar bone, four anterior mandibular teeth were extracted. Soft tissue healing was allowed for approximately 3 months after the extraction, and a new design of implant placement was planned for the mandibular incisor area, followed by clinical and radiological evaluation. Implant placement was determined using an R2GATE surgical stent. The stability of the implants was assessed by ISQ measurements at the first and second implant surgery and after prosthetic placement. At 1 and 3 months and 1 year after implantation of the prosthesis, clinical and radiological examinations were performed. Another 50-year-old male patient presented with discomfort due to mobility of the mandibular central incisors. For the same reason as in the first patient, implant placement was carried out in the same way after extraction. ISQ measurements and clinical and radiological examinations were performed as in the previous case. In these two clinical cases, 12 months of follow-up revealed that the implant remained stable without inflammation or additional bone loss, and there was no discomfort to the patient. In conclusion, computer-guided implant surgery was used to place an implant in an optimal position considering the upper prosthesis. A new design of a narrow-diameter implant with a trapezoid-shape into anterior mandibular alveolar bone is a less invasive treatment method and is based on the contour of the deficient alveolar ridge. Through all of these procedures, we were able to reduce the number of traumas during surgery, reduce the operation time and total treatment period, and provide patients with more comfortable treatment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.539-547
• /
• 2008

Apert syndrome is an autosomal dominant condition characterized by craniosynostosis, midface hypoplasia, and syndactyly of the hands and feet. It occurs in about 1 of every 65,000 to 160,000 births and is caused by a mutation in the fibroblast growth factor receptor 2(FGFR2) gene. Apert syndrome typically produces acrobrachycephaly(tower skull). The occiput is flattened, and there is a tall appearance to the fore head. Ocular proptosis is a characteristic finding, along with hypertelorism and downward slanting lateral palpebral fissures. The middle third of the face is markedly retruded and hypoplastic, resulting in a relative mandibular prognathism. The reduced size of the nasopharynx and narrowing of the posterior choana can lead to mouth breathing, contributing to an open-mouth apprance. Three fourths of all patients exhibit either a cleft of the soft palate or a bifid uvula. The maxillary hypoplasia leads to a V-shaped arch and crowding of the teeth. A 6-year-old male patient visited to the Department of Pediatric dentistry, Kangnung National University of Dental Hospital. He visited the hospital to get treatment of carious teeth. The purpose of this report is to present a specific dental manifestations about the apert syndrome.