• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.11
• /
• pp.15-23
• /
• 2005

In this paper, the static and dynamic behavior of partly wrinkled membrane was studied. Membrane finite elements were used in the analysis and the wrinkling in the element was accounted for by a penalty-parameter material modeling which was implemented as a user subroutine to ABAQUS. The wrinkle algorithm was applied to a corner-loaded square membrane to investigate the effect of wrinkling on the static and dynamic behavior.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.10
• /
• pp.1762-1771
• /
• 2003

In part of mechanical design analysis, quadrilateral mesh is usually used because it provides less approximate errors than triangular mesh. Over the decades, Paving method has been considered as the most robust method among existing automatic quadrilateral element mesh generation methods. However, it also has some problems such as unpredictable node projection and relatively large element generation. In this study, the aforementioned problems are corrected by updating the Paving method. In so doing, a part of node projection process is modified by classifying nodes based on the interior angles. The closure check process is also modified by adding more nodes while generating elements. The result shows well shaped element distribution in the final mesh without any aforementioned problems.

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.137-142
• /
• 2000

본 논문에서는 풀밭으로 덮힌 지역의 초고주파 대역 편파별 후방 산란을 분석하는데 있어서 Radiative Transfer 이론의 첫 번째 해를 이용하였다. 풀밭지역에서의 잎은 사각형 형태의 resistive sheet 으로 모델화 시키고, 잎의 크기와 방향성은 불규칙적으로 흩어져 있다고 가정하였다. 땅에서의 흙의 수분 함유량과 표면 거칠기도 고려하였다. 이러한 지역에서의 후방 산란 계수는 풀밭 지역과 레이더 요소들에 따라 각각 다른 계산 결과를 나타낸다. 측정은 15 GHz 대역의 레이더 시스템을 사용하여 풀 층에서의 산란 계수를 측정하고 풀 층에서의 산란 모델을 이용하여 계산 결과와 측정값을 비교하였고 이 모델을 이용하여 Visual-Basic을 이용한 사용자 프로그램인 TSM(Total Scattering Model)을 제작하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.4
• /
• pp.113-121
• /
• 2013

In this paper, simulations were carried out to determine the efficiency of the rotation efficiency according to the draft of waterwheel in open rectangular channel. In the small hydroelectric generators to get the highest efficiency of waterwheel is very important. But the presence of various elements(free water surface flow, non-uniform velocity distribution because of the waterways wall friction etc) makes it difficult to create a mathematical formula. In this paper, we made a scale model and perform a physical simulation where the draft, gradient and flux is variable. Scale modelling with 10-step draft, 3-step gradients and 2-step flux, as well were constructed then computerized automatic experimental system were configured to acquire the rotational efficiency vs. draft of itself. Rotational efficiency is analyzed as for the draft of waterwheel using the acquired data by varying the gradient and flux of canal. Reviewing the analyzed data, it is confirmed that phenomena of efficiency shown at previous and present experiment is similar and revealed that computerized system shows more sophisticated numerical figures.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.1 no.1
• /
• pp.154-165
• /
• 1998

In this paper, the mongrel singular element with 6 node triangle and 8 node quadrilateral element with J-integral are developed and applied to the various plane crack problems for the isotropic material. The convergence nature is excellent for various crack size with even coarse mesh using the direct method. But the results of the mongrel element with J-integral are worse than the former's ones. Fracture tests were conducted on precracked CT specimens. Results show that, for 7075-T6 aluminum wing spar materials, the fracture toughness is 31.06 ksi.inch $\frac{1}{2}$ in the L-T direction.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1069-1078
• /
• 1990

It is shown that the performance of finite element based on energy orthogonal functions may be superior to conventional formulation for plane stress problem. Using this finite element, it is then attempted to show the distribution of stress concentration effect for subsurface under loading point. It turned out that the stress concentration effect for subsurface is not dependent on the width of the member but the loading area. And then it is shown that the solution attained by taking the stress function as a Fourier series is not satisfactory in y<0.1B.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.39-46
• /
• 2006

This paper analyzes the continuous Galerkin method for the space-time discretization of wave equation. The method of space-time finite elements enables the simple solution than the usual finite element analysis with discretization in space only. We present a discretization technique in which finite element approximations are used in time and space simultaneously for a relatively large time period called a time slab. The weighted residual process is used to formulate a finite element method for a space-time domain. Instability is caused by a too large time step in successive time steps. A stability problem is described and some investigations for chosen types of rectangular space-time finite elements are carried out. Some numerical examples prove the efficiency of the described method under determined limitations.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.1
• /
• pp.56-63
• /
• 1985

Methods for evaluating the added masses of square and hexagonal structures with fluid gap are presented. For a sufficiently small fluid gap, an analytical expression for the added mass is found using the method of matched asymptotic expansion. Experimental data and numerical results using finite element method are also obtained for various sizes of fluid gap. It is shown that added masses increase in inverse proportion to the fluid gap as it becomes smaller. Experimental data, theoretical and numerical results are in good agreement.

• Journal of KIISE:Software and Applications
• /
• v.27 no.7
• /
• pp.731-741
• /
• 2000

This paper proposes a method to detect a facial region and extract facial features which is crucial for visual recognition of human faces. In this paper, we extract the MER(Minimum Enclosing Rectangle) of a face and facial components using projection analysis on both edge image and binary image. We use an active contour model(snakes) for extraction of the contours of eye, mouth, eyebrow, and face in order to reflect the individual differences of facial shapes and converge quickly. The determination of initial contour is very important for the performance of snakes. Particularly, we detect Minimum Enclosing Rectangle(MER) of facial components and then determine initial contours using general shape of facial components within the boundary of the obtained MER. We obtained experimental results to show that MER extraction of the eye, mouth, and face was performed successfully. But in the case of images with bright eyebrow, MER extraction of eyebrow was performed poorly. We obtained good contour extraction with the individual differences of facial shapes. Particularly, in the eye contour extraction, we combined edges by first order derivative operator and zero crossings by second order derivative operator in designing energy function of snakes, and we achieved good eye contours. For the face contour extraction, we used both edges and grey level intensity of pixels in designing of energy function. Good face contours were extracted as well.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 1998.11a
• /
• pp.25-29
• /
• 1998

본 논문은 얼굴 인식 또는 표정 인식 분야에 있어서 중요한 특징을 나타내는 얼굴과 얼굴의 주요소인 눈과 입, 눈썹의 영역 추출 및 그의 윤곽선·추출에 관한 방법을 제시한다. 얼굴요소의 영역 추출은 엣지 정보와 이진화 영상을 병합하여 이용한 프로젝션 분석을 통하여 얼굴 및 각 얼굴요소를 포함하는 최소포함사각형(MER: Minimum Enclosing Rectangle)을 추출하였다. 얼굴 영상에 관련된 윤곽선 연구에는 가변 템플릿(Deformable Template), 스네이크(Snakes: Active Contour Model)를 이용하는 연구들이 이루어지고 있는데 가변 템플릿 방법은 수행시간이 느리고 추출된 윤곽선의 모양이 획일 된 모양을 갖는 특성이 있다. 본 논문에서는 사람마다 얼굴요소의 모양의 개인차가 반영되고 빠른 수렴을 할 수 있는 스네이크 모델을 정의하여 눈, 입, 눈썹, 얼굴의 윤곽선 추출 실험을 하였다. 또한 스네이크는 초기 윤곽선의 설정이 윤곽선의 추출 곁과에 큰 영향을 미치므로, 초기 윤곽선의 설정 과정이 매우 중요하다. 본 논문에서는 얼굴 및 각 얼굴요소를 포함하는 각각의 최소 포함 사각형(MER)을 추출하고, 이 추출된 MER 내에서 얼굴 및 각 얼굴요소의 일반적인 모양을 초기 윤곽선으로 설정하는 방법을 사용하였다. 실험결과 눈, 입, 얼굴의 MER의 추출은 모두 성공하였고, 눈썹이 흐린 사람들의 경우에만 눈썹의 MER추출이 졸지 않았다. 추출된 MER을 기반으로 하여 스네이크 모델을 적용한 결과, 눈, 입, 눈썹, 얼굴의 다양한 모양을 반영한 윤곽선 추출 결과를 보였다. 특히 눈의 경우는 1차 유도 엣지 연산자에 의한 엣지 와 2차 유도 연산자를 이용한 영점 교차점(Zero Crossing)과 병합한 에너지 함수를 설정하여 보다 더 나은 윤곽선 추출 결과를 보였다. 얼굴의 윤곽선의 경우도 엣지 값과 명도 값을 병합한 에너지 함수에 의해 비교적 정확한 결과를 얻을 수 있었다.잘 동작하였다.되는 데이타를 입력한후 마우스로 원하는 작업의 메뉴를 선택하면 된다. 방법을 타액과 혈청내 testosterone 농도 측정에 응용하여 RIA의 결과와 비교하여 본 바 상관관계가 타액에서 r=0.969, 혈청에서 r=0.990으로 두 결과가 잘 일치하였다. 본 실험에서 측정된 한국인 여성의 타액내 testosterone농도는 107.7$\pm$12.0 pmol／l이었고, 남성의 타액내 농도는 274.2$\pm$22.1 pmol／l이었다. 이상의 결과로 보아 본 연구에서 정립된 EIA 방법은 RIA를 대신하여 소규모의 실험실에서도 활용할 수 있을 것으로 사려된다.또한 상실기 이후 배아에서 합성되며, 발생시기에 따라 그 영향이 다르고 팽창과 부화에 관여하는 것으로 사료된다. 더욱이, 조선의 ${\ulcorner}$구성교육${\lrcorner}$이 조선총독부의 관리하에서 실행되었다는 것을, 당시의 사범학교를 중심으로 한 교육조직을 기술한 문헌에 의해 규명시켰다.nd of letter design which represents -natural objects and was popular at the time of Yukjo Dynasty, and there are some documents of that period left both in Japan and Korea. "Hyojedo" in Korea is supposed to have been influenced by the letter design. Asite- is also considered to have been "Japanese Letter Jobcheso." Therefore, the purpose of this study is to look into the origin of the letter designs in the Chinese character culture