• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.11
• /
• pp.215-222
• /
• 2018

In this paper, the research on the energy storage system adapting super-capacitor has been performed. The most advanced features compared to the conventional lead-acid battery systems is that it can obtain high power capability due to the super capacitor power characteristics. The suggested system can attain high power in short times and achieve high power quality improvements. The application areas are power quality improvement system, motor start power which requires high power during transient times. The energy conversion system consists of bi-directional converter and inverter and advantages of high speed, high power charging and discharging performances. The design steps for the two loop controller of the bi-directional inverter are suggested and verified by the experiment and manufacturing. The two loop controller design starts from linearized transfer function which is calculated from the state averaging model including state decoupling method. The current controller requirements are 20% overshoot and settling time and voltage controller are no overshoot and settling time which is 10 times longer than current controller. The design is verified from the step input response. The designed controllers have unity power factor characteristics and thus can improve the power quality of the grid. It also has fast response time and zero steady state error.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.709-718
• /
• 2017

The installation of the elevator ARD(Automatic Rescue Device) system has been forced into law in these days in order to safely rescue passengers during power failure. The configuration of the ARD system consists of energy storage device, power converter and control systems. The EDLC(Electric Double Layer Capacitor) are used as energy storage device for rapid charge/discharge purposes. The power conditioning system (PCS) consists of bi-directional converter, 3-phase converter and control system. The dead-beat control system is adopted for most systems however it requires complex mathematical calculations, the high performance microprocessors are mandatory and thus it can be a cause of high manufacturing cost. In this paper the new control method for average current mode control is presented for simple structure. The control algorithm is applied to the single phase system and then expands to three phase system to meet the sysem requirements. The mathematical modeling using average modeling method is presented and analysed by PSIM computer simulation to verifie the validity of the proposed control methods.

• Korean journal of food and cookery science
• /
• v.16 no.2
• /
• pp.135-142
• /
• 2000

The purpose of this study was to investigate the effects of onion and garlic juice on the lipid oxidation of fish oil as antioxidants and quality characteristics of fish muscle. The samples were treated with onion and garlic juice at 5%(w/w) or 10%(w/w) of fish muscle, and stored at 4$\pm$1$\^{C}$ and -18$\pm$2$\^{C}$ for 7 and 42 days, respectively. The results of this study were as follows: Lipid oxidation in samples was measured by AV, POV and TBA value. AV and TBA values of the samples treated with 5% onion and garlic juice were lower than those treated with l0% onion and garlic juice. POV of the samples treated with onion were lower than those treated with garlic juice. Lightness and yellowness of the sample were the highest in 10% onion and garlic juice-treated ones. The score of overall quality in sensory evaluation was the highest in the samples treated with onion juice stored at 4$\pm$1$\^{C}$.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.81-88
• /
• 2009

This paper alined at the development of a lateral drift control method that is able to quantitatively control the lateral drift of global node. For this, we applied an efficient partial reanalysis algorithm. By using this algorithm, we could recalculate the displacement and member force of the specific node without reanalyzing the entire structure when member stiffness changes partially. The theoretical concepts of the algorithm are so simple that it is not necessary to solve the complicate differential equation or to repeat the analysis of entire structure. The proposed method calculates the drift contribution of each member for the global displacement according to the variation of section sizes by using the algorithm. Then by changing the member sizes as the order of drift contribution, we could control the lateral drift of global node with a minimum quantity of materials. 20 story braced frame structure system is presented to illustrate the usefulness of proposed method. It is shown that the proposed method is very effective in lateral drift control and the results obtained by proposed method are consistent with those of commercial analysis program.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.105-111
• /
• 1999

Dampers have been used to dissipate energy in mechanical systems. There are several types of dampers such as passive, active, and semi-active damper. Semi-active dampers have higher performance than passive ones and require less power to operate than active ones. Their damping characteristics can be changed properly for varying conditions. In this paper, we investigated the semi-active damper using Magneto-Rheological fluid. Magneto-Rheological fluid, which is one of controllable fluids, changes its damping and rheological characteristics from Newtonian fluid to Bingham fluid as the magnetic field is applied. It has several advantages such as high yield strength, low viscosity, robustness to impurities and wide temperature range of stability. If we designe a semi-active damper by using this material, we can not only design a simply structured damper but also expect rapid response. In this study, we propose several types of semi-active dampers which are designed and manufactured using Magneto-Rheological fluid and some problems encountered during their applications.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.1
• /
• pp.54-62
• /
• 1995

This paper is a study on a speed control of an induction motor used the MRA-DSM(Mode1 Reference Adaptive-Discrete Sliding Mode) controller. In this paper, when controls motor speed, DSM algorithm is proposed for having Robustness against disturbance and parameter variation. and it is also proposed MRA-DSM including the additional load model reference algorithm, which can be compensated the discontinuous control imputs at sliding mode and followed the model Preference independent of parameter variation of control subjects. The control system is composed of the parallel processing control system using the microprocessor for maximizing the performance of control systems and the real time processing. Also it simplifies the hardware composed of controlling the system by software and improves the reliability of the system. And while MRA-DSM control, faster response characteristics of 27.2 % is obtained than DSM control.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.4
• /
• pp.349-356
• /
• 1999

This paper presents an instantaneous voltage control scheme of au킹liary power supply system for the electric railway v vehicles, The resonance problem of the LC filter and the existing steady state error are more serious as the use of l instantaneous voltage control techniques for the fast transient response at the nonlinear load, A filter capacitor current f feedback loop is considered to increase the damping ratio of the voltage transfer function for the suppression of the resonance problem of the LC inverter output filter. To eliminate the steady state en‘or existing in case of the AC l instantaneous voltage control. the high gain transfer function is added to the conventional PI controller. The theoretical a analysis is well described with the simulation results. The validity of the proposed schemes is well verified through the s simulation and expelimental results for the 5 kVA prototype.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.244-244
• /
• 2012

유기발광소자는 빠른 응답속도, 높은 색재현성, 높은 명암비의 장점을 가지고 있어 차세대 디스플레이로 각광 받고 있으며, 이미 소형 디스플레이로 상용화되고 있다. 고효율과 색안정성을 가진 유기발광소자를 개발하기 위해 소자의 구조에 관한 연구가 활발히 이루어지고 있다. 하지만 청색 유기발광소자는 적색과 녹색 유기발광소자에 비해 낮은 신뢰성, 발광효율 및 색 순도의 문제점을 가지고 있어, 이를 개선하기 위한 다양한 연구가 필요하다. 청색 유기발광소자의 경우 발광층 내부로 주입되는 정공과 전자의 균형을 조절하기 위해 p-i-n 구조를 사용하거나 이리듐-유기물 합성물과 같은 인광물질의 적용하여 발광효율을 높이는 청색 유기발광소자에 대한 연구가 진행되고 있다. 그러나 정공 보조층과 청색 형광층의 도핑구조의 청색 유기발광소자에 대한 발광효율 증진 효과에 관한 연구는 고효율 유기발광소자의 성능향상을 위하여 필요하다. 본 논문에서는 진공 열 박막 증착 방법을 이용하여 정공 보조층과 청색 형광층으로 구성된 적층 발광구조를 사용한 청색 유기발광소자의 발광효율 증진 효과를 관찰하였다. 10%의 2,9-dimethyl-4,7-diphenyl-1,10-phenanthorlene (BCP)로 도핑된 2-methyl-9,10-bis (naphthalene-2-yl) anthracene (MADN)층을 발광층으로 사용한 유기발광소자, 5% MADN으로 도핑된 1, 3-bis (carbazol-9-yl) benzene (mCP) 층을 발광층으로 사용한 소자 및 10% BCP로 도핑 된 MADN 층과 5% MADN로 도핑된 mCP층을 혼합하여 발광층으로 사용한 유기발광 소자를 제작하였다. 유기 발광 소자의 전기적 광학적 특성을 비교하여 청색 유기발광소자의 발광효율 증가 효과를 규명하였다. 적층 발광층을 가지는 소자는 두 단일 발광층 중심부의 경계면에서 축적된 정공에 의해 발생한 공간 전하에 의한 내부 전위차이의 형성으로 발생된 인력으로 더 많은 전자들을 끌어 들이게 되어 발광효율을 증대시킨다. 이 실험의 결과는 MADN 형광물질을 가진 청색 유기발광소자의 발광효율을 증진 시키는 소자 구조를 제안하고 증진 효과에 대한 이해를 높이는데 도움을 줄 수 있다.

• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.17-22
• /
• 2012

In this study, characteristics of reforming process of Automotive LPG fuel using plasma reactor are investigated. Because plasma reformer technology has advantages of a fast start-up and wide fuel/oxidizer ratio of operation, and reactor size is smaller and more simple compared to typical combustor and catalytic reactor, plasma reforming is suitable to the on-board vehicle reformer. To evaluate the characteristics of the reforming process, parametric effect of $O_2$/C ratio, reactant flow rate and plasma power on the process were investigated. In the test of varying $O_2$/C ratio from partial oxidation stoichiometry to combustion stoichiometry, conversion of LPG was increased but selectivity of $H_2$ decreased. The optimum condition of $O_2$/C ratio for the highest $H_2$ yield was determined to be 0.8~0.9 for 20~50 lpm. The result can be a guide to map optimal condition of reforming process.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.80-86
• /
• 2019

In Korea, a total of 556 chemical accidents occurred from 2012 to 2018 caused by adverse reactions of two or more chemicals, which required significant amounts of time to identify the causative chemicals. Rapid analysis is required for effective incident response and probing. In this study, a quantum transition time-of-flight mass spectrometer was used to identify the causative agents of chemical accidents caused by adverse reactions. The analyzer enabled fast real-time analysis without the need for sample collection and pretreatment. Quantitative and qualitative analysis of most volatile organic compounds with high hydrogen affinity was performed to investigate the cause of the chemical accidents. In fact, in the month of 201◯, methanol and toluene were detected as causative agents of the accident using a quantum transition time mass spectrometer, and were also the cause of the reported odor.