• 한국도로학회논문집
• /
• 제3권3호
• /
• pp.111-118
• /
• 2001

초대형 점보 항공기의 출현으로 인하여 활주로 표면의 마찰저항 성능이 중요하게 되었다. 우천시나 겨울철과 같은 특정한 기후에서 활주로 표면은 수막현상과 마찰력의 손실이 발생하여 항공기의 브레이크 기능이 저하되어 제동력을 잃게 된다. 이러한 문제를 해결하기 위해 많은 연구가 미국항공우주국, 미공군, 미연방항공청 등에 의해 수행되었다. 그 결과 다양한 종류의 마찰저항이 끈 포장표면 처리 방법이 개발되었다. 이러한 설계방법 가운데 대표적인 방법이 그루빙이다. 포장 그루빙 공법은 활주로 표면에 마찰저항을 증가시키고 수막현상을 감소시켜주는 장점이 있는 것으로 보고되고 있다. 본 연구는 인천국제공항의 A-2구간에 수행된 건식 그루빙의 시공결과를 평가한 것이다. 그루빙 시공중에 온도 게이지를 사용하여 포장체+의 온도를 측정하고 건식 그루빙중에 온도변화를 측정하였으며 컷트날의 마찰로 발생하는 그루빙 시공이 완료된 활주로에 물을 살수하고 뮤 미터와 수심측정기를 사용하여 마찰계수와 수심을 계측하였다. 시험결과, 그루빙은 포장체에 손상을 주지 않았으며 활주로 표면은 마찰저항이 증가하고 수막현상을 감소하는 효과가 현저하게 나타나서 건식 그루빙의 효과는 매우 큰 것으로 평가되었다.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.532-540
• /
• 2019

This study describes a test method for evaluating the ice friction and abrasion performance of polar coatings. The evaluation methods of physical properties of general coatings for ocean-going vessels and polar coatings for ice-going vessels were investigated and their limitations were analyzed. We have also reviewed previous researches related to the development of polar paints and confirmed the necessity of developing test techniques. A flat steel plate was coated with several types of commercial coating, and cold model ice was used to cause ice friction and abrasion events between coated surface and ice. For evaluation of ice friction and abrasion performances, test procedures such as measurement of coating surface roughness, measurement of frictional force using model ice, implementation of ice abrasion and drying of coating surface were developed. The friction and abrasion characteristics of each coating are analyzed and summarized through the change of friction force and roughness data according to the progress of ice abrasion.

• 대한조선학회논문집
• /
• 제57권6호
• /
• pp.365-372
• /
• 2020

Ice induced abrasion is known as a critical problem in concrete gravity based offshore structures, which are mainly used in the arctic regions. Although many researches on ice abrasion have been conducted for the last several decades, there still are some difficulties in designing concrete gravity based offshore structures against abrasion problem because there is no standardized method yet due to the uncertain physics involved in. This paper presents an experimental study for the evaluation of concrete abrasion characteristics due to ice friction on concrete surface. For the test, a testing machine capable of abrasion and friction was designed and produced, and standardized procedure was proposed to produce ice specimen used for abrasion test. For the experiment, compressive strength of the ice specimen were explored through a static compression test. Then the friction test between ice specimen and concrete surface was performed and friction coefficients were derived using measured vertical and horizontal forces. Dependency of friction coefficients on some test parameters were studied and discussed as well.

• 대한조선학회논문집
• /
• 제58권3호
• /
• pp.175-181
• /
• 2021

This study describes the model tests in ice according to the frictional coefficient of an ice-breaking ship and the change in ice resistance by the analysis method for each component of ice resistances. The target vessel is a 90K DWT ice-breaking tanker capable of operating in ARC7 ice conditions in the Arctic Ocean, and twin POD propellers are fitted. The hull was specially painted with four different frictional coefficients on the same ship model. The total ice resistance can be separated by ice breaking, ice buoyancy, ice clearing resistances through the tests in level ice, pre-sawn ice and creep test in pre-sawn ice under sea ice thickness of 1.2 m and 1.7 m. Ice resistance was analyzed by correcting the thickness and bending strength of model ice by the ITTC correction method. As the frictional coefficient between the hull and ice increases, ice buoyancy and clearing resistances increase significantly. When the surface of the hull is rough, it is considered that the broken ice pieces do not slip easily to the side, resulting in an increase in ice buoyancy resistance. Also, the frictional coefficient was found to have a great influence on the ice clearing resistance as the ice thickness became thicker.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2011년도 춘계학술논문집 2부
• /
• pp.974-976
• /
• 2011

수석을 가공하기 위해서 회전 통 안에 피연마물을 투입하고 이를 회전 시키면 피연마물 자체의 마찰과 동체와의 마찰로 연마가 된다. 본 연구는 복수의 석재가 회전드럼에 투입되고 회전드럼이 회전을 하면 회전드럼 내측 벽에 개별적으로 고정되어있는 폐비닐로 이루어져있는 패드가 복수의 석재를 회전드럼이 회전하는 방향으로 견인하여 회전드럼에 투입된 복수의 석재가 서로 충돌하여 석재의 거친 면이나 날카로운 모서리가 부드럽게 연마될 수 있도록 하고, 폐비닐로 이루어져있는 패드는 석재에 발생되는 충격을 흡수하고 기존의 패드보다 강도를 크게 향상시키고 훼손된 패드만 교체할 수 있도록 고안하였다.

• 한국항공운항학회지
• /
• 제29권4호
• /
• pp.78-87
• /
• 2021

This study is to evaluate the applicability and performance of trapezoidal-shaped grooves on domestic airport runways. For this, the constructability, drainage performance, and friction resistance characteristics of trapezoidal-shaped grooves compared to square-shaped grooves were evaluated through test construction on pavement at Incheon Airport. As a result of the test construction, the trapezoidal-shaped grooves satisfies the required geometry standards and tolerance, and secured a macrotexture that was 25% improved compared to the square-shaped grooves. It was confirmed that trapezoid-shaped grooves secured drainage performance of more than 7-9%, and surface friction performance improved compared to existing grooves when the surface of the pavement was wet as the test speed increased in the dry state. In addition, after trapezoidal-shaped grooves was installed on the RWY 16R/34L of Incheon Airport, the friction coefficient was 0.84, which satisfies the design level of the new runway surface of 0.82 at the test speed.

• 대한조선학회논문집
• /
• 제48권4호
• /
• pp.363-367
• /
• 2011

In this paper, friction coefficients between ices and model ship were studied in order to predict the resistance of ice. The friction coefficient is a dimensionless scalar value which describes the ratio of the force of friction between two bodies and the force pressing them together. The coefficient of friction depends on the materials, roughness on surface, lubrication, etc. We tested and analyzed the friction coefficient for the development of the test methodology. The friction coefficient for ice model test is very dominant to predict the ship performance, so every ice tank uses their own painting technique. In this study, the friction coefficient with changing the moving speed of ice was studies by using a flat plates which were made by the MOERI's paining technique and the basic research for the developing the paining methodology in the MOERI ice model basin was carried out.