• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.143-148
• /
• 2013

This paper study about multi-beam for ditection of arrival estimation in wireless system. estimate a direction of arrival of target in multi input-output array antennas system. Beam steering method are divided by beam steering method of elevation angle or beam forming method, stack beam steering, frequency steering, phase steering radar and digital beam forming radar. Proposed algorithm is combined SVD method and antenna weight error compensation method with phase and amplitude compensation to effectivity beam steering. Through simulation, we were analysis of performance that general algorithm and proposed target estimation algorithm in this paper. It was proved to improved proposal algorithm than general algorithm in target direction of arrival estimation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.5
• /
• pp.37-46
• /
• 2016

In this paper, we propose the beam-steering system using Rotman lens antenna operating at 2.442GHz which is to replace an expensive phase shifter. The overall system consists of the transmission antennas, Rotman lens and switch box. Setting the initial design conditions, it was designed and fabricated satisfying the requirements. From the result tested in the anechoic chamber, it was found that the beam can be steered using Rotman lens in the anechoic chamber. We also visually checked the beam-steering by turning on the LED of the rectenna showing the real-time beam receiving.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.8
• /
• pp.880-885
• /
• 2010

In this paper, we propose a reconfigurable beam steering antenna using a dipole and a loop. The radiation patterns of the two antennas were cancelled or compensated, and head for the specific direction when a dipole and a loop antenna are combined at the reasonable ratio. The structure of the antenna is very simple and planar. By changing on/ off states of switches, the proposed antenna can steer the beam direction in the x-y plane. Simulation results confirmed the steering characteristic by using two imaginary switches. The proposed antenna can change the direction of the maximum gain in the x-y plane($0^{\circ}$, ${\pm}50^{\circ}$). The proposed antenna operates in 2.5~2.56 GHz(VSWR<2). It showed that peak gain of the antenna is 1.96~2.48 dBi and overall beam width of the reconfigurable antenna covers about $125^{\circ}$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.8
• /
• pp.754-760
• /
• 2011

Reconfigurable beam steering using microstrippatch antenna with U-slot is proposed for wearable fabric applications. The proposed antenna is manufactured on a fabric substrate, and designed to steer the beam directions at the operation frequency of 6.0 GHz. The U-shaped slot and the indirect feeding-techniques are utilized in designing the proposed antenna. By the configuration of two artificial switches($S_0$, $S_1$, $S_2$) in between the indirect feed and the antenna patch, the antenna has three beam directions. The maximum beam directions are steerable in the yz-plane(${\theta}=0^{\circ}$, $30^{\circ}$, $331^{\circ}$), and the overall HPBW is $115^{\circ}$. The measured peak gains are 6.11~6.69 dBi.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.129-135
• /
• 2011

In this paper, we propose a multi target's elevation angle estimation method using multi beam forming technique. This method make a stacked beam to digital processing a received signal in array element. There can be desired receiving beam to application weight value at antenna element in beam forming. Currently, we are to make multi stacked beam using fast fourier transform in stead of phase shifter to be a computer performance much improvement. Also, we improve multi beam directivity using beam steering error correction technique in order to beam steering to desired direction in receiver. Through simulation, we show that the proposed elevation estimation method based on fast fourier transform and beam steering error correction technique, improves th performance of target estimation compared to previous method.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.4
• /
• pp.10-15
• /
• 2017

Feedback burden of a full-digital energy beamforming, which is known as the optimal precoding scheme for radio frequency (RF) energy transfer, is huge because it uses a vector quantization for a channel feedback. To reduce the feedback burden, we consider a beam steering based wireless energy transfer, which uses a scalar quantization. Researches related to the beam steering based wireless energy transfer have been studied in special channel model with an assumption of full channel state information at the transmitter. In this paper, we analyze the beam steering scheme compared with the full-digital energy beamforming for practical channel models with channel estimation errors. According to characteristics of the millimeter wave channel, the number of antennas of the base station and the user, the distance between them, and channel estimation errors, we simulate the performance of the beam steering scheme and analyze reasons why.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.300-304
• /
• 2015

This paper presents an omnidirectionally beam-steerable orthogonal loop resonator for wireless power transfer. The resonator is composed of two orthogonal loops. These connections of two loops and the current direction on the loops are determined by the control of switch. The magnetic field direction is determined by the vector sum of each loop current. The beam is steerable to eight directions by four switch modes. Using the suitable switch mode, the simulation and measurement efficiencies in the whole azimuthal direction are 56.3~60.0 %(deviation 3.7 %) and 41.2~48.7 %(deviation 7.5 %), respectively. The results show a little variation of transmission efficiency in the azimuthal direction.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.5
• /
• pp.223-230
• /
• 2014

In this paper, the single-fed microstrip parasitic array antenna for low-cost three-dimensional beam steering in 5.8GHz ISM(5.725GHz~5.825GHz) band is designed and implemented. The antenna is comprised of one feed active element and four passive elements with variable reactance loads. The beam steering range of implemented antenna is achieved three-dimensional beam steering of ${\pm}28^{\circ}$ at azimuth angle ${\Phi}=0^{\circ}$, ${\Phi}=45^{\circ}$, ${\Phi}=90^{\circ}$, and ${\Phi}=135^{\circ}$ by adjusting variable reactance loads. The maximum gain of the antenna in the beam steering range have within 7.23dBi~9.36dBi and the bandwidth of return loss lower than -10dB covers 5.8GHz ISM band regardless of the beam steering angles.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.10
• /
• pp.1128-1136
• /
• 2012

In this paper, we propose an electrically tilting system based on a null-steering in order to solve the problem of the shadowing loss caused by the mechanically tilted antenna system in mobile services. Especially, we improve the downward shadowing loss by eliminating or moving the vertical beampattern nulls between $-30^{\circ}{\sim}0^{\circ}$ to be able to tilt the downward beampattern between $-10^{\circ}{\sim}0^{\circ}$. The antenna has 14.5 dBi gain and side lobe level (SLL) is lower than -18 dB within downward tilting range. The isolation of polarization is greater than 30 dB when running in electric tilt down to $-10^{\circ}$. To verify this paper, we made the base-station antenna for W-CDMA and beam tilting devices, and verified the performances.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.5
• /
• pp.485-493
• /
• 2019

The parametric array phenomenon refers to the generation of a high directivity low frequency wave from a small size radiation plate using the nonlinearity of the medium. In order to improve the usability of parametric array, the beam steering method of low frequency wave is researched, and the beam steering phenomenon is predicted easily using the PD (product directivity) model. However, the PD model can only be applied to Gaussian sources under quasi-linear conditions. Also, the prediction accuracy of low frequency wave beam width is poor. In this paper, a method for predicting the beam steering characteristics of a parametric array that can overcome the limitation of the PD model is investigated. For this purpose, the numerical analysis algorithm of the KZK (Khokhlov-Zabolotskaya-Kuzentsov) equation widely used for parametric array phenomenon prediction is improved. Thus, the beam steering characteristics are calculated by applying the electrical beam steering condition and comparing experimental results. As a result, the numerical analysis using the modified KZK equation algorithm in this study confirms that the beam steering phenomenon can be predicted even in a parametric array source that does not correspond to the quasi-linear condition.