• Bulletin of the Korean Space Science Society
• /
• 2004.04a
• /
• pp.79-79
• /
• 2004

액체추진로켓 엔진의 추진제 공급 배관은 비행 중 비상상황에 따른 엔진 정지 및 비행종료 후의 엔진 정지 시에 밸브의 급격한 차단에 따라 수격현상이 발생한다. 따라서 추진제 공급배관 및 밸브는 이러한 압력에 견딜 수 있게 설계되어야 한다. 또한 무게를 줄여야 하기 때문에 정확한 최대압력을 예측하여 설계하는 것이 필요하다. 일반적으로 배관의 수격현상은 밸브의 개폐 시간에 가장 큰 영향을 받는 것으로 알려져 있다. (중략)

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2002.04a
• /
• pp.57-58
• /
• 2002

램제트는 다른 여러 추진시스템에 비하여 획기적으로 증가된 사거리를 가지므로 가용범위의 확대는 물론, 목표물 타격 시 높은 명중률과 낮은 격추율을 가지는 효과적인 추진 시스템이다. 램제트 엔진을 장착한 미사일로는 프랑스의 Griffon, ASMP, 미국의 Bomarc, Talos, 영국의 Bloodhound, Sea dart, 소련의 SA4, SA6 등을 비롯하여 많은 종류가 개발되어 실전 배치되었다. 근래 들어 램제트는 군사전략과 전술적인 목적 이외에도 민간용으로도 그 실용성이 강조되고 있어 그 중요성은 날로 더할 것으로 예측된다. 램제트는 일반적인 공기흡입식 엔진과는 달리 엔진 내부에 기계적으로 구동되는 부분이 없이 충격파를 통과하면서 공기의 압력이 높아지는 현상인 램압축 현상을 이용하여 공기를 압축하게 되므로 엔진의 구조가 간단하고, 상대적으로 높은 비추력과 추력/중량비를 가진다. 램제트는 정지 상태에서는 작동되지 않으며 사용 가능한 최소의 압력비를 줄 수 있는 비행 마하수에 도달해야 램제트가 작동하게 된다. 따라서 이러한 비행속도를 줄 수 있는 별도의 추진장치가 필요하게 되는데 이와 같은 보조 추진장치로 부스터를 사용한다. 부스터가 엔진의 내부에 장착된 램제트를 일제형 램제트 (IRR: integral Rocket Ramjet)라 부르며, 현대의 전략미사일과 민간용 초음속 항공기의 엔진에 도입되어 활발한 연구가 진행 중이다. 램압력을 이용하여 압축하므로 램제트의 설계시 설계점 비행 속도에서 전압력 손실이 최소가 되도록 설계되어야 하며, 이를 실험이나 수치해석을 통해 확인하여야 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.90-96
• /
• 2020

In this era, intelligence is considered a major factor in the defense sector. As a result, securing technology for weapons systems for monitoring and reconnaissance of companies has become inevitable. As a result, UAVs (Unmanned Aerial Vehicles) have been developed and are actively operating around the world if the flight operation of manned aircraft is restricted, such as in environments that are too dangerous, messy or boring for the military to perform directly. The system of unmanned aerial vehicles, which has been researched and developed in Korea, includes Air Vehicle Test Equipment(AVTE). AVTE is equipment that is connected to an UAV to check its status and allows the operator to check its flightability by issuing an operational command to the UAV and verifying that it follows the command values. This study conducts fault finding on the phenomenon where the AVTE has stopped operating due to engine noise during these operations and analyzes the cause in terms of software, hardware and external environment. Present improvement measures according to the cause are analyzed and the results of verifying that the proposed measures can prevent failure are addressed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.27 no.4
• /
• pp.21-26
• /
• 2019

The purpose of this study is to suggest a method for the efficient preventive maintenance of aircraft gas turbine engine turbine blades. For this study, the types and characteristics of gas turbine engines and its turbine blades were studied, the turbine blade defect types that caused an In-Flight Shut Down(IFSD) were analyzed, the blade failure rate according to the blade life cycle was analyzed through the Weibull distribution, one of the statistical techniques. Through these research results, it is possible to supplement the problems of the life cycle management and maintenance method of the turbine blade, and to suggest the measures to strengthen the preventive maintenance of the turbine blade. In this analysis, when total cycle of turbine blade exceeds 18,000 cycles, the failure rate is over 98%, and then the special management measures are required.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.1
• /
• pp.159-164
• /
• 2016

This paper reports the load factor logic design for a fly-by-wire helicopter flight envelope protection. As a helicopter is very complex system with a rotor, fuselage, engine, etc., there are many constraints on the flight region. Because of these constraints, pilots should consider them carefully and have a heavy workload, which causes controllability degradation. In this respect, automatic logic is needed to free the pilot from these considerations. As one of these logics, the flight envelope protection logic for the load factor of a FBW helicopter was designed. The flight to exceed the load factor is caused by an abrupt pitch cyclic stick change. In this scheme, the load factor limit logic was added between the pilot stick command block and pitch attitude command block. From the current load value, the available attitude range was calculated dynamically and simulated on the helicopter simulator model to verify the performance. A comparison of the simulation results at the hovering and forward speed region with and without applying the load limiting logic showed that the load factor limit was exceeded more than 20% when the logic was not applied, whereas with the load factor limit logic the load factor was within the limit. In conclusion, a dynamically allocated limitation logic to helicopter FBW controller was verified by simulation.