• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.93-93
• /
• 2003

우주환경은 궤도상의 우주비행체 임무에 다양한 종류의 문제를 발생시킬 수 있으며, 이러한 우주환경 인자로는 방사선대, 태양으로부터 날아오는 고에너지 입자, 우주선(cosmic rays), 플라즈마(plasmas), 미세 우주 파편 등 다양하게 존재한다. 따라서 인공위성을 비롯한 우주비행체의 설계 시 우주환경에 대한 영향을 사전에 예측하고 이를 우주비행체 개발에 반영하고 있다. European Spare Research & Technology Center(ESTEC)는 1998년 European Space Agency(ESA)의 지원을 받아 Space Environment Information System(SPENVIS) 프로젝트를 시작하였다. SPENVIS는 인공위성을 비롯한 우주비행체의 우주환경에 대한 영향을 연구할 수 있는 인터넷 기반 시뮬레이션 프로그램으로서 각종 우주환경 모델을 통해 사용자가 파라메타(parameter) 값을 입력하고 그래픽과 텍스트로 결과를 알아볼 수 있다. SPENVIS 시스템은 인터넷으로 사용자 등록을 통해 이용 가능하며, 시스템의 지속적인 개선 및 확장을 통해 신뢰도를 높여가고 있다. 본 시뮬레이션 연구수행을 통하여 SPENVIS의 우주환경 영향 연구에 향후 활용 가능성을 알아보고자 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.882-884
• /
• 2018

드론은 최근 기상관측, 영상촬영, 인명구조 등의 다양한 분야로 활용 가능성이 입증되고 있다. 이에 따라 다양한 산업 분야에서 드론 적용을 위한 연구가 활발하게 진행되고 있으며, 또한 민간용 시장으로 빠르게 확산되고 있다. 이러한 확산은 일반인들도 드론에 대한 이해와 활용 관점을 가지게 되었고, 실험용 드론 시스템 제작/개발로 이어지고 고 있다. 그러나 드론은 비행체의 물리적 특성상 정밀한 제어가 용이하지 않기 때문에 많은 연습이 필요하다. 또한 법적으로 드론을 비행시킬 수 있는 공간이 다양하지 못하다. 따라서 이 논문에서는 드론을 처음 접하거나 조종이 미숙한 사람들을 대상으로 드론의 비행 조종 연습을 할 수 있는 웹 기반의 교육용 소프트웨어를 개발하고 그 실용 가능성을 평가한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.228-231
• /
• 2010

첨단 항공기와 더불어 효과적인 조종사의 임무수행을 지원하는 소프트웨어인 비행임무지원체계의 개발은 많은 시간과 비용이 소요되며 높은 개발 수준을 요구하고 있는 고도의 소프트웨어이다. 이러한 소프트웨어의 개발에 있어 상호 연동성과 재사용성의 도입은 개발에 필요한 많은 시간을 줄이고 보다 효율적인 구조설계를 통해 품질을 보다 향상시킬 수 있다. 하지만 여러 복합적인 기능을 지원하는 항공기 특성상, 새롭고 다양한 기능을 접목한 비행임무지원체계의 개발은 빈번한 기능요구를 반영하기에는 개발 여력상 힘든 것이 현실이다. 따라서 본 논문은 확장 가능한 구조설계를 위해 Plug-In 을 통한 기능 확장을 구현함으로써 보다 효율적인 비행임무지원체계 프레임워크의 설계 및 개발 방향을 제시하고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1994.11a
• /
• pp.1-5
• /
• 1994

우주공간의 압력은 일반적으로 지구로부터의 고도와 대수 관계에 있으며 위성이 비행하는 궤도는 $10^{-6}$-$10^{-11}$torr의 초진공 상태에 가깝고 고도 수십 km까지는 희박기체의 압력으로 볼 수 있으나 그 이상의 고도에서는 기체 분자가 거의 이온이 되어 대단히 고속의 이온 흐름 상태를 유지하고 있다. 우주용 추진기관 개발에 있어서 이와 같은 초고진공에 해당하는 압력을 구현하지 않으면 않되는 시험 이외에도 비교적 고도가 낮은 공간의 SIMULATION에도 중요한 분야이다.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.510-516
• /
• 2021

Recently, the range of utilization and demand for unmanned aerial vehicle (UAV) has been continuously increasing, and research on the construction of a separate operating system for low-altitude UAV is underway through the development of a management system separate from manned aircraft. Since low-altitude UAVs also fly in the airspace, it is essential to establish technical standards and certification systems necessary for the operation of the aircraft, and research on this is also in progress. If the operating standards and certification requirements of the aircraft are presented, a test method to confirm this should also be presented. In particular, the accuracy of small UAV's navigation required during flight is required to be more precise than that of a manned aircraft or a large UAV. It was necessary to calculate a separate navigation error. In this study, we presented a test method for deriving navigation errors that can be applied to UAVs that have difficulty in acquiring long-term operational data, which is different from existing manned aircraft, and conducted verification tests.

• Journal of Aerospace System Engineering
• /
• v.14 no.5
• /
• pp.49-57
• /
• 2020

The KC-100 has completed civil type certification with the Ministry of Land, Infrastructure, and Transport, and is currently under development as an unmanned aerial vehicle as part of the Ministry of Land, Infrastructure, and Transport. The Certification Technology of small Unmanned Airplane system (CTsUA system), which is an unmanned KC-100, is being developed to enable the installation of heavy-duty mission equipment and long-time flight missions. This study investigated the process and results of analyzing various parameters such as aircraft weight, airspeed, flight altitude, required horsepower, and fuel consumption at each stage to construct a mission profile based on the operational concept of the CTsUA system. To maintain a maximum take-off weight of 3,600 lbs (1,633 kg), the analysis determined that the weight of the application equipment for the unmanned system should be kept below 80 lbs (36 kg).

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.219-224
• /
• 2005

In order to investigate transient behaviour of the CRW(Canard Rotor Wing) type UAV(Uninhabited Aerial Vehicle) propulsion system during flight mode transition considering flow control valve operation, the propulsion system was modelled using SIMULINK commercial program. For transient simulation of the main engine system, the ICV(Inter-Component Volume) method was applied. The valve system is to control the gas flow of the rotary duct system and the main duct system, and the analysis was performed with an assumption that the total gas mass flow of the main engine is the same as summation of the rotary duct flow and the main duct flow, and with consideration of valve loss, flow rate and effective area in valve angle variation. The performance analysis was carried out during flight mode transitions from the rotary flight mode to the fixed wing flight mode and vice versa mode at altitude of 1Km, flight Mach number 0.1 and maximum engine rpm.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.3
• /
• pp.127-132
• /
• 2005

In order to investigate transient behavior, of the CRW(Canard Rotor Wing) type UAV(Uninhabited Aerial Vehicle) propulsion system during flight mode transition considering flow control valve operation, the propulsion system was modelled using SIMULINK commercial program. The valve system is to control the gas flow of the rotary duct system and the main duct system, and the analysis was performed with an assumption that the total gas mass flow of the main engine is the same as summation of the rotary duct flow and the main duct flow, and with consideration of valve loss, flow rate and effective area in valve angle variation. The performance analysis was carried out during flight mode transitions from the rotary flight mode to the fixed wing flight mode and vice versa mode at altitude of 1km, flight Mach number 0.1 and maximum engine rpm.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.1
• /
• pp.61-69
• /
• 2013

In an evaluation process of aircraft flying qualities, a clear and concise application interface is important since an evaluation process requires numerous repeated evaluation. This flight evaluation program have implemented efficient flight evaluation user interface along with changed trim condition interface and composed of comprehensive evaluation interface have mounted all automated FQ evaluation modules that was selected to be compose of 14 items in respect of an unmanned fixed-wing aircraft. Accordingly when it is necessary to design the flight control system as well as to develop a FQ considered aircraft, this S/W can be utilized as a tool that is a useful test evaluation S/W with scalability and enable to reduce the time and the cost of verification and evaluation process.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.908-914
• /
• 2013

This study has developed a small solar powered UAV and performed its flight tests. In daylight, a solar powered UAV flies by using some of electricity generated from solar cells, and stores the remainder into battery. At night it flies by using electricity from battery. A solar powered UAV should have aerodynamically efficient configurations, light-weight, strong wing and fuselage. Its electric propulsion system and solar power system should also be very efficient. In the present study the solar powered UAV and its solar power system are developed for 12 hour continuous flight and the flight tests are performed to verify its performance. The flight tests performed in fall and winter to prove the present solar powered UAV is successful in four-season 12 hour flight.