• Journal of Intelligence and Information Systems
• /
• v.11 no.3
• /
• pp.45-55
• /
• 2005

In this paper, we propose a method to a synchronization of chaotic UAVs(Unmanned Aerial Vehicle) that have unstable limit cycles in a chaos trajectory surface. We assume all obstacles in the chaos trajectory surface have a Van der Pol equation with an unstable limit cycle. The proposed methods are assumed that if one of two chaotic UAVs receives the synchronization command, the other UAV also follows the same trajectory during the chaotic UAVs search on the arbitrary surface.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.9
• /
• pp.773-780
• /
• 2015

In this paper, the structural integrity for a cylindrical vehicle in subsonic environments is verified. In order to confirm static structural safety for the cylindrical vehicle in extreme maneuver condition, the structure analysis and full-scale static structure test are carried out. The commercial finite element codes, MSC. Patran/Nastran is used for numerical simulation. The full-scale static structure test equipment consists of the counterbalance system, loading system and data acquisition system. Besides, the dynamic characteristics for the cylindrical vehicle are reviewed by performing an impact hammer test.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.279-280
• /
• 2018

본 과제는 비행체에 자동제어 시스템인 자동항법비행기능을 탑재한 무인기를 제작한다. 자동항법비행이 가능한 무인기는 사람이 직접 조종하는 기존의 비행체들 보다 정밀하고 섬세한 제어가 가능하며 조종자의 시야가 닿지 않는 곳에서의 비행이 가능하다는 장점을 가진다. 또한 상공에서 영상을 촬영하며 5.8GHz대역의 영상 송 수신기를 통한 실시간 영상 확인이 가능하다. 본 과제는 GPS를 이용한 프로그래밍을 통해 미리 지정한 좌표를 따라 비행이 가능하며 실시간 영상 수신이 가능하기 때문에 사람이 직접 갈 수 없는 오염된 지역 등의 정찰이 가능하고, 비행체에 장착되는 장비에 따라 군용, 소방용 등의 다양한 범위에서의 활용이 가능할 것으로 예상된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.8-16
• /
• 2003

Aerodynamic characteristics over Micro Aerial Vehicle(MAV) in low Reynolds number regime are numerically studied using 3-D unsteady, incompressible Navier-Stokes flow solver with single partitioning method for multi-block grid. For more efficient computation of unsteady flows, this flow solver is parallel-implemented with MPl(Message Passing Interface) programming method. Firstly, MAV wing with not complex geometry is considered and then, we analyze aerodynamic characteristics over full MAV configuration varying the angle of attack. Present computational results show a better agreement with the experimental data by MACDL(Micro Aerodynamic Control and Design Lab.), Seoul National University. We can also find the conceptually designed MAV by MACDL has the static stability.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.1
• /
• pp.47-59
• /
• 2014

This paper deals with a vision-based trajectory tracking control system for a quadrotor-type UAV for entertainment purpose in indoor environment. In contrast to outdoor flights that emphasize the autonomy to complete special missions such as aerial photographs and reconnaissance, indoor flights for entertainment require trajectory following and hovering skills especially in precision and stability of performance. This paper proposes a trajectory tracking control system consisting of a motion generation module, a pose estimation module, and a trajectory tracking module. The motion generation module generates a sequence of motions that are specified by 3-D locations at each sampling time. In the pose estimation module, 3-D position and orientation information of a quadrotor is estimated by recognizing a circular ring pattern installed on the vehicle. The trajectory tracking module controls the 3-D position of a quadrotor in real time using the information from the motion generation module and pose estimation module. The proposed system is tested through several experiments in view of one-point, multi-points, and trajectory tracking control.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.12
• /
• pp.1095-1102
• /
• 2016

This paper presents the results of the design, fabrication and tether test for a gross weight 20 kg tilt-duct VTOL aerial robot. The tilt-duct vehicle, a tri-ducts air-vehicle, which composed of two main tilt ducts for thrust and an aft-fan for pitch attitude control, has been developed as an aerial platform. The research on the air vehicle has been focused on the hover characteristics and controllability to improve the thrust and stability. The tether test for measuring various performance of vehicle and evaluating controllability have been carried out to figure out effects of modified main-prop linkage, actuator, duct configuration and control surfaces.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.11
• /
• pp.9-17
• /
• 2006

The SNU MAV has been designed through studies on highly efficient aerodynamic shape and propulsion system. The configuration of the vehicle was determined from conventional empirical equations, iterative wind tunnel tests and flight tests. The propeller shape was optimized with the various thrust tests and RSM(Response Surface Method) to obtain the higher efficient propulsion system. It was certified that the MAV could fly for over 17 minutes with a 210mAh battery. In addition, it showed good flight characteristics in both stability and controllability.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.459-462
• /
• 2010

A conceptual design is carried out for a two-stage scramjet cruise vehicle flying at Mach 4 to investigate its feasibility. The design goal is to deliver a payload of 225 kg and to fly a range of about 500 km. It is accelerated to its cruising speed by the first stage using a solid rocket of 52.9 kN thrust 3.59 m in length. The second stage cruises using a kerosene-burning scramjet engine of 6.85 kN thrust, the vehicle being 7.55 m in length and 508 mm in width. The vehicle has a take-off weight of 2.1 tons, flies 500 km in 6 minutes at 17 km altitude.

• 한국항공운항학회:학술대회논문집
• /
• 2015.11a
• /
• pp.50-54
• /
• 2015

구형무인비행체는 다중 모터를 이용한 무인항공기에 비행 소형화, 경량화, 경제화 등의 장점을 가지고 있다. 본 논문에서는 구형무인비행체의 경로 추종을 위한 제어기 설계 및 성능에 대한 내용을 다루고 있다. 먼저 구형무인비행체의 운동방정식이 제어기 설계를 위해 유도되었고, 유도된 운동방정식을 이용해 경로 추종 제어기를 설계하였다. 구형무인비행체의 자세제어는 무게중심을 변화하는 방법을 사용하였다. 요구 경로를 설정하여 설계된 제어기의 경로 추종 성능을 MATLAB 시뮬레이션을 통해 확인하였다. 시뮬레이션 결과, 제시된 제어기가 설정된 경로를 추종하고 있음을 확인하였다.

• Journal of the Korea Computer Graphics Society
• /
• v.19 no.1
• /
• pp.21-25
• /
• 2013

In this paper, we consider a physics-based 2D flight simulation game where users can easily control realistic flight of a vehicle equipped with two thrusters that allow vertical takeoff and vertical landing. The flight vehicle can be manipulated by directly controlling the thrusting force at each thruster using a pair of analog input devices such as joysticks. However, it might require too much practice to make aerobatic flying solely with this kind of control. We propose a set of fly-by-wire methods that provide easy-to-use, intuitive control of a VTVL vehicle. Based on PD controllers, the proposed methods allow users to specify the velocity or position of the vehicle directly. Furthermore, they are easy to understand and simple to implement. We expect that the proposed vehicle model and control mechanism could be used in various 2D games.