• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.22-27
• /
• 2017

In this paper, A heightened interest in the latest drone, yet steady increase in the field to exploit them. The next market is expected to be vastly improved, and use drone also increasingly will be strengthened. But also not a few side effects of him. In order to use safer and more commonly a drone safety and privacy protection, and there are many issues that need to be considered. Violating privacy laws, such as relations caused by the drone flight and review this study ways to resolve the breach. The flight due to a draw at peace with human life and behavior and enjoy it, but this problem created by new outbreak.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.4
• /
• pp.316-323
• /
• 2016

A UAV(Unmanned Aerial Vehicle) flies along pre-programed navigation points(in-flight, take-off, or landing) automatically without pilot input. Even though UAVs fly differently from general piloted aircraft as the pilot controls the aircraft from a ground station through means of a data-link system. Occasionally, the data-link connection can be lost for any number of reasons, in which case, the FLCC(Flight control Computer) must automatically switch to autopilot to continue flying. Hence, the FLCC is a flight-critical component that must be throughly tested and validated. This paper discusses the development of a HILS(Hardware in the Loop Simulation) test environment designed to simulate real flight conditions to verify the FLCC satisfies flying quality requirements and maintains robustness despite any potential malfunctions or emergency situations.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.830-835
• /
• 2016

With the relaxation of regulations on unmanned aerial vehicles (UAVs) in the USA, the development of related industries is expected. Hence, it is anticipated that the number the UAVs will reach approximately 600,000 in the USA in 2017. However, automated flights of commercial UAVs are restricted owing to concerns about accidents. To deal with the possibility of collisions, several studies on collision prevention and the routing of UAVs have been conducted. However, these studies do not deal with various situations dynamically or provide efficient solutions. Therefore, we propose a centralized routing method for the UAV that uses vehicular networks. In the proposed scheme, vehicular networks regard UAVs as data packets to be routed. Accordingly, the proposed method reduces UAV processing power required for route searches. In addition, the routing efficiency for UAV flight paths can be improved since congestion can be minimized by using a vehicular network.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.7
• /
• pp.569-576
• /
• 2013

The Airworthiness Certification from the government has an increasingly important role due to the dramatic growth of military aircraft development industry. It is a mandatory process of qualifying the flight safety within the aircraft's operational boundaries throughout its life cycle. The introduction of airworthiness certification has resulted in development paradigm shift from one requirement for one consumer need to the common requirement for many needs. This research paper provide the refinement of airworthiness certification criteria related to the flight control law and the verification methods which comply with its criteria.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.5
• /
• pp.10-17
• /
• 2003

Dynamic stability is critically required to stabilize an airship which is statically unstable. Numerical computations were performed in order to support and confirm the foced oscillation wind tunnel tests. To analyze the low-speed flow filed around the airship, a low-Mach number preconditioned method was applied. Using two computation methods, variations of the dynamic damping coefficients were examined. Numerical results show that it is dynamically stable for three directional moments, but unstable for normal or side force. It is revealed that the damping coefficients are more sensitive to the direction of the angular rate than the angle of attack or the magnitude og angular rate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.6
• /
• pp.464-470
• /
• 2018

In this paper, a practical method of estimating the flap hinge moments which change according to the aircraft flap operations was introduced. For the flap design, the hinge moment derived by structural load analysis and wind tunnel tests was able to be compared with the real flight hinge moment, and the static safety of the flap structure could be verified though this comparison. In order to perform the tests, two strain gauges were installed on the flap hinge and an onboard device for aircraft load monitoring was utilized. Through the ground test, the correlation between the strain and the moment of the flap hinge was calibrated with analytic and finite element analysis. During the flight test, strain signals together with the flap deflection angles and airspeed were recorded. Finally, the flight hinge moments could be predicted by the measured strain which was calibrated with the analytic and the finite element analysis.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.172-172
• /
• 2017

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.406-407
• /
• 2022

자율운항선박, 무인선과 같이 전통적 선박 형태에 자율성이 부여되는 형태로의 발전과 함께 드론, 비행체 같은 비행 형태까지 포함하는 해상 모빌리티는 기존 통신 체계 대비 실시간성 향상 및 대용량 데이터 교환이 요구되는 새로운 해상 안전 운항 체계가 수반되어야 한다. 초고속해상무선통신망(LTE-Maritime) 송수신기를 장착한 국내 선박의 경우, LTE급의 통신 서비스를 연안 최대 100km까지 받을 수 있지만, 국제 항해를 하는 국적선과 외국적 선박을 포함하는 해상 모빌리티 안전 운항 체계 구축을 위해서는 VDES(VHF Data Exchange System)와 같은 국제협약에서 인정하고 해상이동서비스(Maritime Mobile Service)에 속하면서 기존보다 빠른 통신망의 보급이 필수적이다. 본 논문에서는 향후 해상 모빌리티 구현을 위해 필요한 해상무선통신망의 하나로 VDES의 필요성에 주목하여 그간의 개발 현황으로부터 향후 VDES 서비스 도입 및 활용방안에 관해 논한다.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.58-62
• /
• 2023

In this work, the structural integrity was investigated of the structural design results of internal components for the aircraft engine. The radiator and intercooler were combined with the internal components of the engine. Therefore, the safety of the radiator and intercooler was investigated during flight conditions. The structural integrity was evaluated through structural analysis, using the finite element analysis method. The acceleration load for structural design and analysis was considered. The structural safety evaluation found the structural design results to be valid.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.82-87
• /
• 2004

The general requirements to achieve the structural integrity of the airframe are described in the military specification, MIL-HDBK-1530. One of these requirements is the durability and damage tolerance of the airframe, which should be shown through the analysis and test based on the related specifications. This paper describes the full scale durability test load simulation to evaluate the structural safety and durability of the advanced trainer, T-50. The test load simulation was performed according to the procedure in the military specification and the KAF contract requirements. The durability test design technique which involve the floating test set-up, the optimal test load simulation method, and the 6-DOF test article balance method to secure the real flight conditions as many as possible. It was confirmed that this method will be available in a similar full-scale airframe structural test in future.