• JOURNAL OF ELECTRICAL WORLD
• /
• s.274
• /
• pp.66-71
• /
• 1999

최근 사업용 화력발전설비의 건설에서는 이제까지의 실적 중시 시스템구축 경향에서 벗어나, 적은 인원에 의한 중앙집중감시의 고도화와 건설비저감 경향에 따라 신기술 특히 디지털기기의 응용을 지향한 주요 전기기기의 합리화가 급속하게 추진되고 있다. 또 제어로직의 소프트웨어화, 신호 전송화의 확대는 설비의 고도화$\cdot$합리화의 양면에서 우위를 차지하고 있다. 사업용 화력발전설비는 고신뢰성과 고가동률이 요구되어 전력의 안정공급에 있어 중핵을 담당하고 있다. 발전기와 여자제어장치, 발전소 감시제어시스템은 발전소단위의 고기능화, 전력계통 안정화를 위한 협조제어 등에 있어서 중요한 역할을 담당하고 있다. 화력발전소의 감시는 적은 인력을 중앙에 집중 배치하여 일괄감시$\cdot$제어하는 경향이 확산되어, 감시$\cdot$조작$\cdot$이력관리 기능의 고도화와 작업환경의 정비가 급속하게 진전되고 있다. 여기에는 적어도 최근의 디지털기기 응용확대가 크게 기여했으며, 이러한 것들이 신뢰성을 확보한 토털시스템 구축이라는 발전소 시스템 엔지니어링의 영역확대와 중요성이 커지게 된 요인이라고 할 수 있다. 화력발전소 제어시스템의 고도화는 주요기기의 안정된 운전과도 깊이 관련되어있어 근년의 발전설비 건설에서 중요한 과제의 하나가 되고 있다. 한편, 화력발전소의 감시$\cdot$제어항목은 방대하며, 아울러 급속히 진보해가고 있는 디지털기술을 효율적으로 도입하여 설비의 고도화를 추진해갈 필요성이 날로 커져가고 있다고 생각한다. 여기서는 최근의 발전기의 기술동향과 감시제어시스템의 기술동향을 소개함과 동시에 앞으로의 전망에 대하여 기술한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.494-497
• /
• 2005

Direct velocity feedback (DVFB) control with a collocated distributed actuator and point sensor pair is known that it offers a good stability with high performance when the control strategy is applied at the suppression of structural vibration. Also decentralized control method introduced to offer to reduce implementaion effort and malfunction due to failure in sensors and actuators of control system has become an important position in DVFB. In this paper, the decentralized control is compared with centralized control in terms of vibrational velocity reduction in a clamped-clamped beam.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.27 no.2
• /
• pp.195-203
• /
• 2017

This paper is concerned with the active vibration control of shell structure that is subjected to internal unbalanced excitation by using active mounts and accelerometers. The unbalanced excitation is caused by a rotating unbalanced mass. The control algorithm considered in this study is the negative acceleration feedback (NAF) control. A simplified dynamic model was derived to verify the effectiveness of the NAF control. Four actuators and four accelerometers were mounted on the shell structure, so that the multiple-input and multiple-output (MIMO) NAF controller was designed by both centralized and decentralized ways. Numerical results show that both the decentralized and centralized NAF controllers are effective. Based on the numerical simulation, the proposed decentralized NAF controller was applied to the real shell structure. Experimental results show that the proposed decentralized NAF controller can effectively suppress vibrations of the shell structure.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.11a
• /
• pp.396-399
• /
• 2013

TDMA(Time-Division Multiple Access)는 한정된 채널을 시간상에서 여러 개의 구간으로 분할하고, 자신에게 할당된 시간 구간에서 정보를 전송하는 기법이다. 본 논문은 TDMA 알고리즘의 한 종류인 DESYNC 알고리즘을 소규모 네트워크에 적용하여 별도의 동기화 작업 없이 간단한 규칙으로 동기화를 유지하는 기법을 소개 한다. 기존의 DESYNC 알고리즘은 모든 노드들이 전송 영역 안에 있어야 하고, 전부 연결되어있어야 한다는 단점이 있다. 이 문제점을 해결하고자 중앙제어장치인 CU(Central Unit)을 네트워크에 배치하여 2-홉 형태의 중앙 집중방식 네트워크가 운영되도록 하였다. 제시하는 알고리즘은 기존의 DESYNC 알고리즘과 마찬가지로 복잡한 동기화 과정 없이 단순한 방식으로 TDMA가 동작할 수 있도록 하면서, 전송 범위는 기존의 DESYNC 알고리즘의 성능에 비해 우수하다.

• Journal of KIISE:Information Networking
• /
• v.37 no.1
• /
• pp.72-83
• /
• 2010

Group communication in a wireless mesh network is complicated due to dynamic intermediate mesh points, access control for communications between different administrative domains, and the absence of a centralized network controller. Especially, many-to-many multicasting in a dynamic mesh network can be modeled by a decentralized framework where several subgroup managers control their members independently and coordinate the inter-subgroup communication. In this study, we propose a topology-matching decentralized group key management scheme that allows service providers to update and deliver their group keys to valid members even if the members are located in other network domains. The group keys of multicast services are delivered in a distributed manner using the identity-based encryption scheme. Identity-based encryption facilitates the dynamic changes of the intermediate relaying nodes as well as the group members efficiently. The analysis result indicates that the proposed scheme has the advantages of low rekeying cost and storage overhead for a member and a data relaying node in many-to-many multicast environment. The proposed scheme is best suited to the settings of a large-scale dynamic mesh network where there is no central network controller and lots of service providers control the access to their group communications independently.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.731-740
• /
• 2015

In the recent days, interests in machine-to-machine communication schemes in small-scale networks has been increasing with growing demands. TDMA(Time Division Multiple Access) can be used as a multiple access method in small-scale networks. However, time synchronization for TDMA is complicated or needs additional equipments. Such a large cost is not suitable for small-scale networks. We propose, BC-DESYNC, a efficient time synchronization for small-scale networks by extending DESYNC(DESYNChronization). DESYNC takes a long time to complete synchronization and doesn't guarantee the synchronization delay. BC-DESYNC uses CU(Central Unit) that performs a centralized control to achieve the 2-hop communication and guarantees the synchronization completion time by using Mimic firing and C-DESYNC scheme.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.90-101
• /
• 1999

This paper is concerned with the design of automatic ship maneuvering system including automatic path tracking controller and automatic berthing controller. The optimal control technique is employed to design the automatic path tracking controller, which is based on the linearized equations of ship motion. The numerical example shows that the automatic path tracking controller is capable of tracking the line between way points which are determined by pilot a priori. The decentralized control technique is employed to design the automatic berthing controller. In addition to the automatic path tracking controller, the fuzzy logic controller is used to control the forward speed. The numerical example shows that the automatic berthing controller can be successfully implemented.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.55-61
• /
• 2010

This paper is concerned with an experimental research to random vibration control caused by external loads specially in bridges which tend to be structurally flexible. Experimenting on a reduced structure modelled on Seohae Grand Bridge, we inflicted a reduced form of El-centro wave on the model structure to a proper proportion. On the center of its middle span, we placed a shear type MR damper which was to control its vibration and also acquire its structural responses such as displacement and acceleration at the same site. The experiments concerning controlling vibration were performed according to a variety of theories including un-control, passive on/off control, and Lyapunov stability theory. Its control performance was evaluated in terms of the peak absolute displacements, the peak absolute accelerations and the total power required to control the bridge which differ from each different experiment method. Among all the methods applied in this paper, case of Lyapunov control method turned out to be the most effective to reduces of displacement and acceleration. Also, this method could to decrease consuming of external power for vibration control. Finally, it was noteworthy that Lyapunov control method was specially effective in the vibration control employing a semi-active damper such MR damper.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.1
• /
• pp.85-94
• /
• 2011

This paper is concerned to constitute a semi-active realtime feedback vibration control system and evaluate it through experiments in order to control in realtime the vibration externally generated, specially on the bridges which is structurally flexible. For the experiment of vibration control, we built a model bridge structure of Seohae Grand Bridge in a 1/200 reduced form and inflicted El-centro wave on the model structure also in a reduced force considering the lab condition. The externally excited vibration was to be controled by placing a shear type MR damper vertically on the center of bridge span, and the response (displacement and acceleration) of structure was to be acquired by placing LVDT and Accelerometer at the same time. As for the experiment concerning controlling vibration, a realtime feedback vibration control experiments were performed under each different condition largely such as un-control, passive on/off control, Lyapunov stability theory control, and Clipped-optimal control. Its control performance under different condition was quantitatively evaluated in terms of the peak absolute displacements, the peak absolute accelerations and the power required for control on the center of span. The results of experiments proved that the Lyapunov control and clipped-iptimal control were effective to decrease the displacement and acceleration of the structure, and also to decrease the power consumption to a great extent. Finally, the semi-active realtime feedback vibration control system constituted in this research was proven to be an effective way to control and manage the vibration generated on bridge structure.

• Proceedings of the KIEE Conference
• /
• 2008.10a
• /
• pp.75-76
• /
• 2008

전력거래소는 전격계통 안정된 운영과 공정한 전력시장 운영을 주요 임무로 하며, 이를 위하여 전국의 80여개의 발전소와 600여개 변전소로부터 발전량, 전압, 조류, 자단기 상태정보 등 다양한 전력계통 자료를 취득하고 있다 전력거래소의 중앙급전소에는 이와 같은 계통자료 취득은 물론 발전량 제어기능을 수행하기 위한 에너지관리시스템(이하 EMS 라 한다)을 운영하고 있으며, 발,변전소에는 현장의 전력설비와 연결되어 계통자료를 취득하여 EMS로 전송하는 원격소장치 (이하 RTU 라한다)를 운영하고 있다. 자료취득 경로는 모든 발전소와 34skv급 이상의 변전소의 경우 EMS와 RTU가 직접 연결되어 자료를 취득하며 154Kv급 이하 변전소는 12개 지역급전소의 자료취득제어시스템(이하 SCADA라 한다)를 경유하여 자료를 취득하고 있다. 전력계통의 대형화와 복잡화에 따라 계통해석기능 자동발전제어기능에 의한 계류운영으로 정보기술에 대한 의존도가 증가하고 있으며, 변동비 반영시장의 개선운영에 따라 공정한 전력시장 운영과 안정된 전력계통 운영을 위해 전력계통 취득자료의 신뢰도가 요구되고 있다. 따라서 EMS를 비롯한 RTU, 통신망 등 전력계통 자료취득 설비의 운영실적을 분석하여 각 시스템별 고장 고장원인 고장유형 등을 고찰하므로써 시스템 성능개선을 위한 설비투자와 운영개선에 반영하고자 한다.