• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.874-880
• /
• 2007

Capillary Suction Time(CST) and Specific Resistance to Filtration(SRF) were commonly used to evaluate the sludge dewatering behaviors. A coupled equation was developed through the mathematical theory which represented both CST and SRF as the physical filterability of the ultrasonically treated sludge. The model for coupling CST and SRF includes both equipment variables and variables related to sludge characteristics, and verified with the results from experiments. The results of the theoretical and experimental study showed that a good correlation relationship among dewaterability indices.

• Journal of Ocean Engineering and Technology
• /
• v.2 no.2
• /
• pp.122-129
• /
• 1988

Recently with the rapid development in marine and shipbuliding industries such as marine structures, ship and chemical plants, there occurs much interest in the study of corrosion fatigue characteristics which was closed up an important role in mechanical design. In this study, the 5086 Al-alloy was tested by use of rotary bending fatigue tester. The retardation effect of overload on the corrosion fatigue crack propagation in sea environment was quantitatively studied. 1) Retardation effect of corrosion fatigue crack propagation is most eminent when overload ratio is 1.52, overload magnitude corresponds to about 77% and 55% of yield strength and tensile strength respectively. 2) After overload ratio 1.52 was used, retardation of corrosion fatigue crack growth rate is largely retarded and quasi-threshold stress intensity factor range($\Delta\textrm{K}_{th}$) appears. 3) According to m of experimental constant, retardation effect of corrosion fatigue crack propagation corresponds to about 25% of constant stress amplitude when overload ratio is 1.52. 4) When overload ratio 1.52 was used, retardation parameter (RP) decreases to about 0.43 and corrosion sensitivity (S)decreses to about 2.1.

• Journal of Radiation Protection and Research
• /
• v.16 no.2
• /
• pp.1-6
• /
• 1991

The $HgI_2$ single crystal which can be used for the ${\gamma}-ray$ detector at room temperature was grown by Temperature Oscillation Method. The low temperature photoluminescence, specific resistivity and trap concentration of $HgI_2$ single crystal were investigated. Three main luminescence bands were observed at 2.30eV, 2.20eV and 2.00eV at 20K, related to the excitons, I-vacancies and impurities, respectively. The specific resistivity and trap concentration of $HgI_2$ single crystal were $10^{11}{\Omega}\;cm\;and\;1.8{\times}10^{14}/cm^3$ at room temperature, respectively. Also the radiation detecting system was deviced by $HgI_2$ ${\gamma}-ray$ detector, one chip microprocessor, LCD module and personal computer. The prepared $HgI_2$ ${\gamma}-ray$ detector showed a good linearity of ${\gamma}-radiation$ dose for standard ${\gamma}-ray$.

• Journal of the Microelectronics and Packaging Society
• /
• v.18 no.1
• /
• pp.49-53
• /
• 2011

Diamond-like carbon (DLC) films is a metastable form of amorphous carbon containing a significant fraction of Sp3 bond. DLC films have been characterized by a range of attractive mechanical, chemical, tribological, as well as optical and electrical properties. In this study DLC films were prepared by the RF magnetron sputter system on $SiO_2$ substrates using graphite target. The effects of the post annealing temperature on the Property variation of the DLC films were examined. The DLC films were annealed at temperatures ranging from 300 to $500^{\circ}C$ using rapid thermal process equipment in vacuum. The variation of electrical property and surface morphology as a function of annealing treatment was investigated by using a Hall Effect measurement and atomic force microscopy. Raman and X-ray photoelectron spectroscopy analyses revealed a structural change in the DLC films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.243-244
• /
• 2011

최근에 산화물 반도체를 평판 디스플레이와 태양 전지의 투명 전극으로 응용하기 위해 많은 연구가 진행중에 있다. 특히, $In_2O_3$ 박막은 투명 전도 산화막으로써 3.7 eV의 직접 전이 밴드갭 에너지를 갖고 가시광 영역에서 높은 투과도를 갖는 반도체이어서 다양한 영역에서 응용 가능하다. 본 연구는 낮은 비저항과 높은 투과율을 갖는 최적의 투명 전도막을 성장시키기 위하여 라디오파 반응성 마그네트론 스퍼터링 방법을 사용하여 질소 도핑된 $In_2O_3$ 박막을 유리 기판 상부에 증착하였고, 후열처리로 온도 400, 450, 500, 550$^{\circ}C$에서 급속 열처리를 수행하여, 증착된 박막의 구조, 표면, 광학, 전기적 특성을 조사하였다. 증착된 박막은 XRD를 사용하여 구조적 특성을 조사한 결과, $2{\theta}=30.2^{\circ}$와 43.95$^{\circ}$에서 상대적으로 강한 피크가 관측되었다(Fig. 1). 전자는 (222)면에서 회절된 피크이며, 후자는 (100)면에서 발생한 회절 피크이다. 열처리 온도가 0$^{\circ}C$에서 500$^{\circ}C$로 증가함에 따라 (222) 면의 회절 신호의 세기는 상대적으로 증가하였고, 550$^{\circ}C$에서 급격하게 감소하였다. 박막의 광학적 특성은 자외선-가시광선 분광기를 사용하여 광학 흡수율과 투과율을 측정하였다(Fig. 2). 열처리를 하지 않은 박막의 경우에, 파장 200~1,100 nm 범위에서 측정된 평균투과율은 76%이었다. 광학 흡수 계수와 광자 에너지의 관계를 나타내는 포물선 관계식을 기초로 하여 광학 밴드갭 에너지를 계산하였다. 박막의 전기적 특성의 경우에, Hall 효과를 측정하여 전하 운반자 농도, 홀 이동도, 전기 비저항을 조사한 결과, 전기적 특성은 열처리 온도에 상당한 의존성을 나타냄을 알 수 있었고, 열처리 온도 500$^{\circ}C$에서 박막의 비저항값은 $4.0{\times}10^{-3}{\Omega}cm$이었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.349-352
• /
• 2009

In this study, the relation between the performance degradation of SOFC single cell and the increase of polarization resistance for the cathode is investigated. $Pr_{0.3}Sr_{0.7}Co_{0.3}Fe_{0.7}O_3$(PSCF3737, $19.4{\times}10^{-6}K^{-1}$) and $Gd_{0.1}Ce_{0.9}O_2$ (CGO91, $12{\times}10^{-6}K^{-1}$) are used as a cathode and an electrolyte, respectively. The polarization resistance of cathode is increased due to the delamination caused by thermal expansion coefficient difference. The voltage drop with 10%/1000h decline rate occurs during long-term, when the interface between the cathode and the electrolyte is delaminated due to TEC difference.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.446-446
• /
• 2014

흑연(graphite)과 티타늄(titanum; Ti) 타겟이 양쪽에 부착되어 있는 비대칭 마그네트론 스퍼터링 장치를 이용하여 Ti이 도핑되어진 다이아몬드상 탄소박막(Ti doped Diamond-like carbon, DLC:Ti)을 증착하였다. 흑연과 티타늄 타겟의 파워는 고정하고 기판에 음의 DC 바이어스를 인가하여 DC 바이어스 변화에 따른 DLC:Ti 박막을 증착하였다. 증착되어진 박막의 음의 DC 바이어스의 변화에 따라 변화되어지는 경도와 마찰계수, 표면의 거칠기, 접촉각 등의 물리적 특성들을 분석하였으며, XPS와 라만등의 분석법을 이용하여 박막의 구조적 특성을 분석하였으며, 패시베이션 층을 위한 전기적 특성등을 평가하여 이들 특성들간에 관계를 고찰하였다.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.911-917
• /
• 1996

Platinum thin films were deposited on Si-wafer by DC rnagnetron sputtering for RTD (resistance thermometer devices). We investigated the physical and electrical characteristics of these films under various conditions, the input power, working vacuum, temperature of substrate and also after annealing these films. The deposition rate was increased with increasing the input power but decreased with increasing Ar gas pressure. The resistivity and sheet resistivity were decreased with increasing the temperature of substrate and the annealing time at 1000.deg. C. At substrate temperature of >$300^{\circ}C$, input power of 7 w/cm$^{2}$, working vacuum of 5 mtorr and annealing conditions of 1000.deg. C and 240 min, we obtained 10.65.mu..ohm..cm, resistivity of Pt thin films and 3800-3900 ppm/.deg. C, TCR(temperature coefficient of resistance). These values are close to the bulk value. These results indicate that the Pt thin films deposited by DC magnetron sputtering have potentiality for the development of Pt RTD temperature sensor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.128-131
• /
• 1997

기본 조성식 M $n_{1-x}$/F $e_{2+x}$/ $O_4$(이하 Mg계), M $n_{1-x}$/F $e_{2+x}$/ $O_4$(이하 Mg계)의 식에서 x를 0.0,0.025,0.1,0.2로 변화시키고, 하소온도 80$0^{\circ}C$, 소결은도를 l10$0^{\circ}C$~12$50^{\circ}C$로 $50^{\circ}C$간격으로 변화 시켰을 때와 Mn계와 Mg계를 1:1로 흔합하였을 때, F $e_2$ $O_3$의 과잉 양이 증가할수록 비저항은 감소하였고, 저항온도계수 $\alpha$는 밀도와 비례하는 관계를 나타내었으며, B정수는 4600(K)에서 10500(K)의 범위를 나타내었다. 본 조성의 실험으로써 Mn-Ni-Co계 서미스터의 대체가 가능함을 확인할 수 있었다.있었다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.11a
• /
• pp.95-96
• /
• 2007

DC magnetron sputtering 법으로 다양한 $Ga_2O_3$함량비( $2.27{\sim}$ 10.81 wt%)를 가진 고밀도 GZO 소결타겟을 사용하여 GZO박막을 증착한 후 도핑농도에 따른 광학적 특성과 전기적 특성을 조사하였다. GZO($Ga_2O_3$: 6.65 wt%)타겟을 사용하여 기판온도 $300^{\circ}C$에서 증착한 GZO박막은 상대적으로 낮은 비저항($5.1{\times}10^{-4}$ ${\Omega}cm$)과 85% 이상의 높은 투과율을 보였다. 또한 타겟의 $Ga_2O_3$함량이 6.65 wt%일때 광학적 밴드갭 에너지는 3.61 eV로 비교적 큰 흡수계수의 변화를 보였으며 그 이상의 $Ga_2O_3$농도에서는 밴드갭 에너지가 감소하는 경향을 보였다.