• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.870-873
• /
• 2000

This investigation reports the grinding characteristics of quartz. Grinding experiments were performed at various grinding conditions including wheel mesh, table speed and depth of cut. The grinding forces and specific grinding energies were measured to compare the grindability of quartz with those of structural ceramics such as A1$_2$O$_3$, SiC, Si$_3$N$_4$ and ZrO$_2$. Surface roughness was also measured with tracer and the ground surfaces were observed with SEM. The chip formation energy of quartz was about 6J/㎣, which is quite smaller than those of structural ceramics. Although plastic flows are occured in Si$_3$N$_4$ and ZrO$_2$, micro/macro cracks are occured in ground surface of quartz like in A1$_2$O$_3$ and SiC.

• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.16-22
• /
• 2018

Silicon carbide (SiC) is used in various semiconductor processes because it has superior thermal, mechanical, and electrical characteristics as well as higher chemical and corrosion resistance than existing materials. Due to these characteristics, various manufacturing technologies have been developed for SiC. A recent development among these technologies is Chemical Vapor Deposition SiC (CVD-SiC). Many studies have been carried out on the processing and manufacturing of CVD-SiC due to its different material characteristics compared to existing materials like RB-SiC or Sintered-SiC. CVD-SiC is physically stable and has excellent chemical and corrosion resistance. However, there is a problem with increasing the thickness, because it is manufactured through a deposition process. Additionally, due to its high strength and hardness, it is difficult to subject to machining.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.8-14
• /
• 2003

The characteristics of grinding and wear behavior of diamond wheel for grinding ceramic materials was investigated in this study. In case of $Si_3N_4$, the wear of wheel was large, the finding force was relatively stable and the fluctuation of surface roughness n small. On the other hand in case of $Al_2O_3$ and $ZrO_2$, the wear of wheel and surface roughness were decreasing, the grinding force was increasing. During grinding with vitrified bond wheel, $Si_3N_4$ shows renewal of cutting edge while $Al_2O_3$ and $ZrO_2$ show glazing phenomenon of cutting grains. We have found that it possible to observe the behavior of grinding wheel by grinding ratio, grinding resistance, surface roughness and cutting edge ratio. Through the grinding experiments, it was found that grinding life of diamond wheel is 20 times for $Si_3N_4$, and 40 times fir $Al_2O_3$ and $ZrO_2$.

• 한국기계가공학회지
• /
• 제10권2호
• /
• pp.73-78
• /
• 2011

The existent cutting insert have occupied most product of grinding style, because it has a problem of accuracy and manufacturing process. The product has a concept but development is difficult, because grinding and manufacturing by press are impossible. But by development and stabilization of a technology, preference of non-ground insert increases gradually. And then insert that grinding is impossible is developed availably as non-ground product by using developed equipment and software. In this paper reports some experimental results on the machining performance of non-ground Cutting inserts. Three kinds of Cutting inserts were manufactured without using grinding process. Machining experiments were carried out to compare the machining performance of non-ground inserts with that of ground ones. The experimental results indicate that the cutting forces and tool wear and surface roughnesses of machined surface of both ground and non-ground inserts are comparable.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.64-71
• /
• 2009

Cylindrical lens core for optical transceiver was designed and machined. With the lens design data, WC asymmetric core surface data were generated for non-revolutional ultra-precision grinding. Grinding process for optimum machining conditions of target surface was studied in terms of surface roughness and form profile. We used experimental results to optimize turbine speed, feed-rate and depth of cut with durable grinding wheel wear. Ground WC cores were measured contact type profilers and verified.

• 한국정밀공학회지
• /
• 제16권1호통권94호
• /
• pp.167-173
• /
• 1999

This paper presents results of monitoring grinding processes with on-the-machine measurement of surface roughness by using nux ratios of scattered lights. A compact, on-the-machine surface roughness sensor. which consists of a diodelaser and several optic units. is developed. The control unit is also developed. The developed sensor together with the controller is applied for monitoring grinding processes of two different grinding machines. Experimental results show that the nux ratios and their standard deviations measured by the developed sensor over the entire ground surface are useful for monitoring grinding conditions. In particular, the sensor and the control unit are proved to be useful for monitoring grinding processes in order to detect abnormal grinding conditions and dressing time.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.106-111
• /
• 2001

This study reports the grinding characteristics of quartz. Grinding experiments were performed at various grinding conditions including wheel mesh, table speed and depth of cut. The grinding forces and specific grinding energies were measured. Surface roughness was also measured with tracer and the ground surfaces were observed with SEM. A new parameter SDR(Surface roughness Direction Ratio) is proposed to characterize the grinding mechanisms of quartz. A set of experiments was performed to verify the effectiveness of the suggested parameter. The experimental results indicate that the ductile mode is the dominant material removal mode at the grinding conditions which show the higher value of SDR whereas the material is removed by brittle fracture in a lower value of SDR value increases with wheel mesh size.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.46-54
• /
• 1995

This paper presents a simple method for measurenemt of roughness of ground surfaces. The present method utilizes fluxes of scattered lights condensed through lenses aligned along the specular direction. A theoretical analysis is preformed for the purpose of investigating the possibility of the method as well as determining the experimental condition. Experiments are also performed to show the effectiveness and robustness of the proposed method. The theoretical and experimental results show that the proposed method is simple enouth to implement and has a potential to identify a wide range of roughness of ground surfaces.

• 대한기계학회논문집
• /
• 제12권6호
• /
• pp.1303-1311
• /
• 1988

본 연구에서는 적응제어 연삭가공 공정에 사용가능한 인프로세스 표면조도 측 정기술 개발을 목표로 하여 공학을 이용한 비접촉식 조도측정 기술의 개발을 시도하였 으며 포스트 프로세스에도 사용가능 하도록 하였다. 측정기술의 개발은 정반사광과 난반사광의 단순비교 방법 (정반사광에 대한 난반사광의 비율을 이용하는 방법)과 산 란광의 패턴인식(pattern recognition)을 이용하는 방법의 두가지로 진행되었는데, 후 자의 방법에 중점이 두어 졌으며 Beckmann의 산란이론(scattering theory)이 측정시스 템 제작의 관점에서 분석되고 응용되었다.

• 한국정밀공학회지
• /
• 제30권5호
• /
• pp.493-498
• /
• 2013

The present study treats the optimization process for a non-linear grinding system with dual time delay, mainly from the energetic viewpoint. To this end, the stability of the grinding system is investigated first with regard to the grinding wheel rotation speed. The concept of grinding energy density is newly proposed as the primary figure of merit and this quantity is evaluated at various stable and limit cycle conditions. The computational results show that simple monotonic trend in energy density is observed under stable conditions, whilst rather complicated behaviors can appear when the conditions are associated with limit cycle oscillations. Finally, the relations between the vibration amplitude and the energy density and their implications on the engineering decision/compromise are discussed.