• 제목/요약/키워드: 비셀룰로오스

검색결과 4건 처리시간 0.023초

셀룰로오스 섬유의 생분해성 평가 (Evaluation of Cellulosic Fiber해s Biodegradation)

  • 강연경;박정희
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.123-126
    • /
    • 2002
  • 섬유와 같은 고분자 물질의 생분해성은 그 분자의 화학적, 물리적 특성과 밀접한 관련이 있으므로 같은 셀룰로오스로 이루어진 섬유라고 해도 각각의 화학적 구조나 물리적 특성에 따라 분해 거동이 다를 수 있다. 면, 마, 레이온, 아세테이트 등은 모두 셀룰로오스계 섬유라는 공통점이 있으나 구조적 차이, 제조 공정의 차이, 그리고 분자의 화학 조성 등이 다르며, 함유되어있는 비셀룰로오스분의 종류 및 구성비가 다르다. (중략)

  • PDF

케냐프 섬유 분리에 대한 화학적 레팅효과 (Effect of chemical letting on the fiber seperation of Kenaf bast)

  • 이혜자;한영숙;유혜자;김정희;송경헌;안춘순
    • 한국의류학회지
    • /
    • 제27권9_10호
    • /
    • pp.1144-1152
    • /
    • 2003
  • Kenaf has been cultivated in Jeju Island. After being harvested at 105 DAP(day after planting) and separated from kenaf stalks , decorticated kenaf basts were treated with different concentration/temperature/time combinations in order to do chemical rotting. The following fiber properties were compared; rotting effects, colors, crystallinity, molecular structures, dyeabilities, and non-cellulose contents such as pectins, lignins, & hemicellulose. The best results of chemical rotting were obtained from the specimens treated with low concentration/ low temperature/short time. Their colors were bright yellow. The lumens of specimens diminished with the affect of NaOH. The structures of chemically rotted kenaf fibers were cellulose 1. The degree of crystallinity of chemically retted kenaf fibers were very high. Non-cellulose content, especially hemicellulose, was low in the specimens treated with the high NaOH concentration. Dyeabilities of kenaf fibers were higher among the specimens without the non-cellulose content than those with the non-cellulose content.

비셀룰로오스 함량에 따른 케나프 섬유의 특성변화 (The Change of Kenaf Fiber Characteristics by the Contents of Noncellulosic Material)

  • 이혜자;한영숙;유혜자
    • 한국의류학회지
    • /
    • 제30권11호
    • /
    • pp.1581-1588
    • /
    • 2006
  • The effects of removal of lignin or hemicellulose on the cottonizing and pulping characteristics of kenaf fiber were studied by comparing the conditions of non-cellulosic material contents, fiber lengths and dyeability. And the effects of lignin or hemicellulose on dyeability of the kenaf fiber using CI Direct Green 26 and CI Direct Red 81 were investigated. The results were as follows. The lignin contents decreased and the kenaf fiber became shorter and finer as the reaction time with sodium chlorite increased. The hemicellulose could be removed by treating sodium hydroxide solution to the fiber from which the lignin partly removed. The 80% of hemicellulose could be removed by 5% of sodium hydroxide solution in 5 minutes. But if lignin were not removed at all, hemicellulose could not be removed. The fiber lengths proper for apparel were obtained after treating sodium chlorite for 10-20 minutes and those for pulping were obtained after treating sodium chlorite for 40 minutes. The kenaf fibers from which lignin and hemicellulose partly removed were dyed with CI Direct Green 26 and CI Direct Red 81. Their dyeability increased as the removal rates of lignin increased. The ${\Delta}E$ values of kenaf fiber dyed with CI Direct Green 26 were lower than CI Direct Red 81.

식물섬유 수초지의 제조와 물성에 대한 연구 (The Properties and Production of Hand-Made Paper Made from Various Plant Fibers)

  • 이혜자;임희정;배현영;모태화;유혜자;한영숙
    • 한국의류학회지
    • /
    • 제32권9호
    • /
    • pp.1366-1375
    • /
    • 2008
  • This studies were carried out in order to develope environmentally-friendly fiber materials and substitute resources of Paper mulberry. Various plant fibers such as New Zealand flax, Indian mallow, Kuzu vine and Yucca were used as raw materials of hand-made papers. We rotted these 4 kinds of plant fibers and removed non-cellulose. After rotting, the pulping rate(%) and the length of fibers in pulps were measured. The physical characteristics of papers made of various plants fiber were investigated and the probabilities of practical use were considered. The results were as follow: The non-cellulose contents of plant fibers were $30{\sim}40%$ and those contents must be lower down to 8% to be able to manufacture the hand made papers. The lignin in pulps were removed almost and the hemicellulose were partially removed to reach up to appropriate level of the pulp rates and fiber lengths. The more hemicellulose removed, the finer fiber thickness were and rapidly the lower Hanji tensile strength were. But the tear strength of these plants of hand-made papers do not decreased so much as tensile strength. So the property of 4 types of plant fibers might be of great advantages to make hand-made papers. Both tensile and tear strengths of Hanji of New Zealand flax, Indian mallow, Kuzu vine and Yucca were higher than Paper mulberry hand-made paper. When 30% of mulberry paper were mixed, the mixing effect showed maximum. Because of the functions of all plant fiber hand-made papers showed better than those of Paper mulberry hand-made paper, 4 types of plant fibers could be substitute Paper mulberry.