• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.185-190
• /
• 2007

In this paper, minimum sampling rates and method of nonlinear characterization were suggested for low power, quasi-memoryless PAs. So far, the Nyquist rate of the input signal has been used for nonlinear PA modeling, and it is burdening Analog-to-digital converters for wideband signals. This paper shows that the input Nyquist rate sampling is not a necessary condition for successful modeling of quasi-memoryless PAs. Since this sampling requirement relives the bandwidth requirements for Analog-to-digital converters (ADCs) for feedback paths in digital pre-distortion systems, relatively low-cost ADcs can be used to identify nonlinear PAs for wideband signal transmission, even at severe aliasing conditions. Simulation results show that a generic memoryless nonlinear RF power amplifier with AMAM and AMPM distortion can be successfully identified at any sampling rates. Measurement results show the modeling error variation is less than 0.8dB over any sampling rates.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.406-413
• /
• 2024

The proposed method uses Generalized Cross Correlation - Phase Transform (GCC-PHAT) method with nonlinear preprocessing and a frequency domain low-pass filter. In this paper, by reinterpreting the calculation process of GCC-PHAT as DFT, we derive that there is an effective frequency band used for time delay estimation in GCC-PHAT, and by using only the effective band using a low-pass filter, the noise component is reduced and it improvesthe time delay performance in impulsive noise environments. By comparing the proposed method with the traditional GCC-PHAT in an impulsive noise environment, we show that the GCC-PHAT becomes more robust to the impulsive noise.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.7 no.5
• /
• pp.37-46
• /
• 2007

This is the second of two companion papers that describe non-prismatic beam element for nonlinear seismic analysis of steel moment frames. Described in a companion paper is the formulation of a non-prismatic beam element to model the elastic and inelastic behavior of steel beams, which have reduced beam sections(RBS). This study describes the determination of yield surfaces, stiffness parameters, and hardening (or softening) rule parameters for RBS beam element. Analytical results of the RBS beam element show good correlation with test data and Finite Element Method(FEM) results.

• Journal of IKEEE
• /
• v.17 no.2
• /
• pp.111-118
• /
• 2013

In this paper, the subband nonlinear adaptive Volterra filters are introduced and its analysis are presented. From the eigenvalue analysis of the input correlation matrix, we show that the proposed subband adaptive Volterra filter has superior convergence performance as compared to the conventional one, which shows that the it can be useful for the recently proposed subband nonlinear adaptive echo canceller. Also, the optimum filter in each subband are introduced and verified from the computer simulations.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.30-36
• /
• 2002

This paper describes a nonlinear adaptive noise canceler(ANC) using neural networks(NN) based on filter to make up for the drawback of the conventional ANC with the linear adaptive filter. The proposed ANC was tested its noise rejection performance using broadband time-varying noise signal and compared with the ANC of TDL linear filter. Experimental results show that in cases of nonlinear correlations between the noise of primary input and reference input, the neural network based ANC outperforms the linear ANC with respect to mean square error It is also verified that the recurrent NN adaptive filter is superior to the feedforward NN filter. Thus, we identify that the NN adaptive filter is more effective than the linear adaptive filter for rejection of broadband time-varying noise in the ANC.

• Proceedings of the KSMRM Conference
• /
• 2001.11a
• /
• pp.173-173
• /
• 2001

목적： 1.5T 생체용 자기공명영상기기를 이용한 수소자기공명분광법으로 용액 내 물질의 정량분석에 대한 가능성을 알아보고자 하였다. 대상 및 방법： 0.01％에서 50％까지의 여러 농도를 갖는 포도당+증류수 혼합액의 모델용액을 만들어 생체용 자기공명영상기기와 시험관 nuclear magnetic resonance (NMR) 분광기에서 각각 수소 자기공명분광법을 시행하여 스펙트럼을 얻었다. 또한 12명의 당뇨환자에서 방광내의 소변에 대해 생체용 자기공명영상기기에서 스펙트럼을 얻고 소변을 추출하여 시험관 NMR 분광기에서 수소자기공명분광법을 시행하였다 각각의 방법으로 얻은 스펙트럼 상에서 포도당 농도에 따른 포도당/물 피크의 면적 비의 변화를 구하였고, 통계처리는 상관분석과 단순선형회귀분석을 시행하였고 회귀식을 산출하였다. 또한 생체용 자기공명영상기기를 이용하여 얻은 결과가 객관적인지 알아보기 위해 시험관 NMR 분광기에서 얻은 결과와의 상관관계를 분석하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.1
• /
• pp.55-63
• /
• 2012

The turbulent flow characteristics in a coaxial injector were investigated by the nonlinear $k-{\varepsilon}-f_{\mu}$ model of Park et al.[1] and large eddy simulation (LES). In order to analyze the geometric effects on the scalar mixing for nonreacting variable-density flows, several recessed lengths and momentum flux ratios are selected at a constant Reynolds number. The nonlinear $k-{\varepsilon}-f_{\mu}$�� model proposed the meaningful characteristics for various momentum flux ratios and recess lengths. The LES results showed the changes of small-scale structures by the recess. When the inner jet was recessed, the development of turbulent kinetic energy became faster than that of non-recessed case. Also, the mixing characteristics were mainly influenced by the variation of shear rates, but the local mixing was changed by the adoption of recess.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.292-299
• /
• 2015

An envelope elimination and restoration transmitter that uses a tri-level envelope encoding scheme is presented for improving the efficiency and linearity of the system. The proposed structure amplifies the same magnitude signal regardless of the input peak-to-average power ratio and reduces the quantization noise by spreading out the noise to the out-of-band frequency, resulting in the enhancement of power efficiency. An improved linearity is also obtained by providing a new timing mismatch calibration technique between the envelope and phase signal. Implementation in a 130 nm CMOS process, transmitter measurements on a 20-MHz long-term evolution input signal show an error vector magnitude of 3.7 % and an adjacent channel leakage ratio of 37.5 dBc at 2.13 GHz carrier frequency.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.3
• /
• pp.267-272
• /
• 2012

This paper propose the implementation of robust fuzzy controller for controlling an active magnetic bearing (AMB) system with 6 degree of freedom (DOF). A basic model with 6 DOF rotor dynamics and electromagnetic force equations for conical magnetic bearings is proposed. The developed model has severe nonlinearity and uncertainty so that it is not easy to obtain the control objective. For solving this problem, we use the Takagi-Sugeno (T-S) fuzzy model which is suitable for designing fuzzy controller. The control object in the AMB system enables the rotor to rotate without any phsical contact by using magnetic force. In this paper, we analyze the nonlinearity of the active magnetic bearing system by using fuzzy control algorithm and desing the robust control algorithm for solving the parameter variation. Simulation results for AMB are demonstrated to visualize the feasibility of the proposed method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2C
• /
• pp.238-246
• /
• 2004

In this paper, an estimator that take advantages of time and frequency correlation within an OFDM symbol is investigated. OFDM systems using the proposed estimator can be very effective in detecting signals under non-sampled space and time-varying channels. Also, under same complexity, the proposed estimator outperforms the previously proposed estimator. Since even if there are no assumption about channel correlation, the linear interpolation method instead of optimal interpolation using correct channel correlation is proposed in case the receiver does not know the channel correlation function in time domain. Therefore the proposed channel estimator help improving the performance of OFDM systems under non-sampled spaced and fast time-varying channels.