• Journal of Korea Water Resources Association
• /
• v.50 no.5
• /
• pp.325-334
• /
• 2017

In this study, the numerical investigation of the non-linear behavior of the fluid flow with physical properties, such as porosity and intrinsic permeability of a porous medium, and kinematic viscosity of a fluid, are carried out. The applied numerical model is ANSYS CFX which is the three-dimensional fluid dynamics model and this model is verified through the application of existing physical and numerical results. As a result of the verification, the results of the pressure gradient-velocity relationship and the friction coefficient-Reynolds number relationship produced from this study show relatively good agreement with those from existing physical and numerical experiments. As a result of the simulation by changing the porosity and intrinsic permeability of a porous medium and the kinematic viscosity of a fluid, the kinematic viscosity has the biggest effect on the non-linear behavior of the fluid flow in the porous medium.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.1
• /
• pp.41-53
• /
• 2006

In this study, estimation of nonlinear adsorption isotherms(Langmuir & Freundlich adsorption isotherm) and advection-dispersion model parameters was conducted using genetic algorithm(GA) for Zn and Cd adsorption. Estimated parameters of nonlinear adsorption isotherms, which were obtained from the optimization process using genetic algorithm(GA), are nearly same with the parameters obtained from a linearization process of the nonlinear isotherms. Estimated effective diffusion coefficients, which were obtained from a finite element analysis of the advection-dispersion model and an optimization procedure using the genetic algorithm, for the metals were approximately in the order of $10^{-7}cm^2/s$ which could be obtained based on the linear distribution coefficient. The effective diffusion coefficients based on the nonlinear retardation factors were in the range of $10^{-6}{\sim}10^{-5}cm^2/s$. As a result, the correlation coefficient obtained between the measured and calculated concentration was over 0.9 which means that the genetic algorithm should be successfully applied to estimate the unknown parameters of the nonlinear adsorption isotherms and advection-dispersion model.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.89-98
• /
• 1993

As the construction of nuclear power plants are increased, nuclear wastes disposal has been faced as a serious problem. If nuclear wastes are to be buried in the underground stratum, thermo-mechanical behavior of stratum must be analyzed, because high temperature distribution has a significant effect on tunnel and surrounding stratum. In this study, in order to analyze the structural behavior of the underground which is subject to concentrated heat sources, a coupling method of nonlinear finite elements and linear boundary elements is proposed. The nonlinear finite elements (NFE) are applied in the vicinity of nuclear depository where thermo-mechanical stress is concentrated. The boundary elements are also used in infinite domain where linear behavior is expected. Using the similar method as for the problem in mechanical field, the coupled nonlinear finite element-boundary element (NFEBE) is developed. It is found that NFEBE method is more efficient than NFE which considers nonlinearity in the whole domain for the nuclear wastes depository that is expected to exhibit local nonlinearity behavior. The effect of coefficients of the rock mass such as Poisson's ratio, elastic modulus, thermal diffusivity and thermal expansion coefficient is investigated through the developed method. As a result, it is revealed that the displacements around tunnel are largely dependent on the thermal expansion coefficients.

• Journal of the KSME
• /
• v.34 no.7
• /
• pp.510-516
• /
• 1994

탄성파의 속도는 파동 전파 매질의 밀도와 탄선계수에 달려 있으므로, 박막이 입혀진 기판에서 전파하는 표면파에 대해서 기판과 박막의 밀도와 탄성계수 및 박막의 두께 등을 알면 전파 속 도를 계산할 수 있다. 박막의 탄성계수를 모르는 경우에는 표면파 속도를 측정하여 역으로 탄 성계수를 산출할 수 있다. 이러한 역산과정에는 일반적인 비선형 방정식의 curve-fitting에 이용될 수 있는 simplex법이 효율적으로 활용된다. 이 글에서는 표면파 속도를 측정하고 그 데이터로 부터 역산하여 박막의 탄성계수를 구하는 원리와 과정을 설명한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.4 no.3
• /
• pp.11-21
• /
• 2000

구조물에 내진설계를 적용하는 목적은 지진에 노출되는 구조물에 안전성과 경제성을 고려한 파괴메카니즘을 부여하는 것이다. 내진설계에 보편적으로 적용하고 있는 응답스펙트럼해석법은 선형해석법으로 구조물의 비선형 동적거동에 의한 영향은 특정 계수로 반영한다. 그러나 기존의 내진설계시방서들이 강진지역에 있는 나라들에 의해 제정 및 개정되어 왔기 때문에 응답스펙트럼 해석법 뿐만 아니라 기타의 적용규정이 강진지역에 위치한 구조물의 상황만을 고려하여 제시되었다. 따라서 중약진지역에 위치한 구조물의 내진설계에 대한 별도의 연구가 요구되고 있다. 이 연구에서는 중약진지역에 위치한 콘크리트 교량을 선정하여 비선형 동적거동을 반영하는 계수를 결정하고 응답스펙트럼 해석법을 적용하였다. 연구 결과 바탕으로 중약진지역의 교량에 대해 내진설계의 목적을 만족하는 개선된 내진설계 절차를 제시하였다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.2
• /
• pp.11-22
• /
• 2011

The design comparison and nonlinear analysis of totally prefabricated bridge substructure systems are performed. The prefabricated bridge substructures are designed by the methods of present design and load and resistance factor design (LRFD). For the design, the current Korea Highway Bridge Code (KHBD), with DB-24 and DL-24 live loads, is used. This study evaluates the present design method of KHBD (2005) and AASHTO-LRFD (2007) for totally prefabricated bridge substructure systems. A computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), for the analysis of reinforced concrete structures, was used.

• Proceedings of the Optical Society of Korea Conference
• /
• 1997.08a
• /
• pp.32-32
• /
• 1997

• Journal of Digital Convergence
• /
• v.10 no.9
• /
• pp.357-362
• /
• 2012

We have compared and predicted for non-linear time series data which are real data having different variences using GRCA(1) model and neural network method. In particular, using Korea Composite Stock Price Index rate, mean square errors of prediction are obtained in genaralized random coefficient autoregressive model and neural network method. Neural network method prove to be better in short-term forecasting, however GRCA(1) model perform well in long-term forecasting.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.5
• /
• pp.600-607
• /
• 1998

일반적인 비선형 동역학 최적화문제를 비선형 프로그래밍 문제로 변환하는데 제어변수들을 방사성 기본 함수로 근사화하는 방법이 사용되었다. 방사성 기본 함수의 계수들을 연속적으로 보정하기 위하여 최소수정기법에 기초를 둔 비선형 프로그래밍 알고리즘이 연구되었다. 이러한 알고리즘을 실제적인 다변수 제어 시스템에 적용하여 성능을 검증하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.26-27
• /
• 2003

이광자 흡수가 큰 유기 화합물의 개발과 응용을 위해 이광자 흡수과정의 메커니즘을 이해하는 것은 매우 중요하다. 일반적으로 이광자 흡수를 측정하는 방법으로는 비선형 투과나 이광자 여기 형광을 측정하여 이광자 흡수계수를 구하는 방법이 사용되며, 많은 경우 측정에 사용된 레이저의 펄스 폭에 따라 다른 값을 보고하고 있다 본 연구에서는 7 ns와 35 ps-펄스 레이저에서 DTT 유도체의 비선형흡수를 측정하여 그 결과를 여기준위 흡수에 의한 이광자 흡수의 증가로 설명하였다. (중략)