• 대한기계학회논문집A
• /
• 제21권1호
• /
• pp.83-92
• /
• 1997

In a study on the development of Cu-based sintered friction materials, the specimens pressed with various compacting pressures $(3-6 ton/cm^2/)$ have been evaluated to find the optimum condition of compacting pressure. As compacting pressure increased up to $(5 ton/cm^2/)$, mechanical properties such as density, hardness, bending strength, wear and coefficient of friction, etc. improved remarkably, but up to 6 ton/cm$^{2}$, decreased slightly because of traps of gases and water vapors in specimen. Disk assembly composed of 12 pieces of Cu-based friction materials has been compared with one of asbestos-and nonasbestos-based friction materials. In dynamic and driving tests to find burst spin strength, corrosion area rate and friction properties, etc., Cu-based sintered friction materials showed better properties than the others, especially in severe conditions because oxides such as $Cu_2O; and; SnO_2$ in the friction surface of friction materials were formed.

• Elastomers and Composites
• /
• 제35권3호
• /
• pp.180-187
• /
• 2000

석면대체용으로 육티탄산칼륨($K_2Ti_6O_{13}$)을 합성하고, 이를 사용하여 새로운 형태의 비석면계 자동차용 마찰재를 개발하고자, 마찰재 매트릭스의 조성 및 물성 최적화와 육티탄산칼륨이 고무복합체에 어떠한 특성을 부여하는지에 대해 조사하였다. 원하는 침상형태의 육티탄산칼륨은 KCI 염을 단독으로 하고 $K_2CO_3$를 과량으로 첨가하여 합성하였을 때 안정하게 얻을 수 있었다. 또한, 적절한 마찰재로서의 성능을 얻기 위해서는 육티탄산칼륨은 실란커플링제로 표면 처리하여 매트릭스 고무와의 계면접착력을 향상시키고, 10 phr의 에폭시 수지를 첨가하여야 함을 알 수 있었다.

• Tribology and Lubricants
• /
• 제13권3호
• /
• pp.10-19
• /
• 1997

Frictional characteristics of two different types of automotive friction materials were studied. They were non-asbestos organic and semi-metallic friction materials. The two friction materials were tested using an inertial brake dynamometer to investigate friction stability, rooster tailing phenomena, temperature change during drags and stops. Results show that the level of the friction force is strong functions of time, temperature, and speed regardless of the type of friction materials. In particular, rooster tailing effects are pronounced in the case of semi-metallic friction materials compared to non-asbestos organic friction materials. The phenomena appear strongly dependent on raw materials contained in the friction materials.