• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.3
• /
• pp.689-696
• /
• 2000

In this paper, an improved method is proposed to eliminate the chattering for Sliding Mode Controller. The differential-calculus of a switching function is converged to a particular constant or the proportional term so that the chattering in transient state is eliminated in the conventional method. However, by using the improved method, it is converged to its proportional-integral term so that the chattering is eliminated in transient state and steady state both. The computer simulation for brushless DC motor speed controller is used to compare the improved method with the conventional method and to verify the useful effect of the method in this paper.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.11
• /
• pp.1068-1076
• /
• 2004

Technology on the proportional integral (PI) control have grown rapidly owing to the needs for the robust capacity of the controllers from industrial building sectors. However, PI controller requires tuning of gains for optimal control when the outside weather condition changes. The present study presents the possibility of reinforcement learning (RL) control algorithm with PI controller adapted in the HVAC system. The optimal design criteria of RL controller was proposed in the Environment Chamber experiment and a theoretical analysis was also conducted using TRNSYS program.

• Journal of Drive and Control
• /
• v.9 no.4
• /
• pp.58-61
• /
• 2012

The customers who used the hydroulic system desire the product that has more detailed specification quickly during the industrial technology is developed. Every researcher try to reduce the developed period and to satisfy the customers' desire. Lot's of simulation software and hardware already was used to be satisfied those purpose. But these kind of equipment need a lot of cost to set up and technical knowledge to drive that system. This paper concerns about analog PID controller that can be assembled with a few resistor, condenser and optional amplifier and doesn't need technical knowledge to drive. At the first, the plant was modeled mathematically to design the analog PID controller's circuit. After that, PID controller's parameter was selected by customers' desire. Finally, the analog PID controller's circuit was assembled from the control law. The circuit's availability was confirmed by step response test in the controlled system.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.76-81
• /
• 2009

A nonlinear pressure controller to actively regulate the thrust of a solid propulsion system is presented. To compensate for the parametric uncertainties with respect to the chamber pressure induced by changing nozzle throat area, Lyapunov-based parameter adaptation method has been applied. In order to verify the effectiveness of the proposed control method, the experiments were carried out using the cold gas test equipment that can simulate the operating environment of variable thrust solid propulsion system. The experiment results show that the nonlinear pressure controller has better performance than conventional P and PI controller.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5416-5426
• /
• 2012

This study uses the algorithm which estimates the magnetic flux using different models in the low speed driving area and the high speed driving area by the voltage-current model synthesis magnetic flux Estimator and, from this result, estimates the magnetic flux angle to achieve the stable speed control through all the areas from the low speed to the high speed drive. In particular, the current change and the magnetic flux change under variable load were estimated in real time in the low speed area and this made the control characteristic improved in the low speed area. According to this, even under variable load, the more stable simulation and experiment could have been completed using PI current controller and PI flux controller in all the areas. As a result, the outstanding speed control characteristic has been achieved.

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.288-289
• /
• 2006

Conventional AGC controller implemented by considering ACE and bias factors always contains error terms due to inaccuracy of bias factors. To improve this steady state AGC performance, PI controller can be introduced to the ACE processing and plant controller part. Even though more rigorous inspections are required, a simple application shows that it can be very useful for the improvements of AGC performances.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.47-49
• /
• 2005

This paper presents a robust speed control method of induction motors(IM) using a Non-linear PI controller(NPI), NPI is high gain controller in region of small error, and low gain controller in region of large error. so in steady state, system will be robust against variation of load torque. The simulation and experiment results confirm the validity of proposed control scheme.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.2
• /
• pp.209-214
• /
• 1999

New estimation and tuning schemes of inductance variations for rotor flux oriented (RFO) control of induction motor in field weakening region are presented. Stator transient inductance and stator self inductance are estimated. From estimated stator self inductance. magnetizing inductance is estimated and from estimated stator transient inductance, rotor leakage inductance is estimated. Simulation and experimental results prove the effectiveness of the proposed s scheme in constant torque and field weakening region.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.411-412
• /
• 2012

본 논문은 유도 전동기 센서리스 제어를 위해 자속 추정기로 사용되는 Programmable low-pass filter (PLPF)의 문제점 분석과 그 해결방안에 관한 연구이다. 기존의 PLPF는 추정된 동기 각속도를 극점으로 사용하고 실제 동기 각속도가 추정 값과 동일하다는 가정하에 순수 적분기와의 위상과 크기 오차를 보상한다. 하지만 추정 동기 각속도가 실제 값과 같지 않다면 이때 얻어진 크기와 위상 보상은 적절하지 않게 되고, 결과적으로 PLPF는 순수적분 기능을 제대로 수행할 수 없게 된다. 본 논문은 PLPF의 문제점을 극복하고자 동기 각속도 오차가 고정자 자속의 위상 지연 오차와 비례함을 분석하고, 이를 통하여 동기 각속도 오차를 보상하는 방법을 제안하였다. 제안한 방법의 타당성은 실험을 통하여 증명되었다.

• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.67-72
• /
• 1999

A magneto-rheological(MR) fluid based rotary loading and braking device is developed. The loading and braking forces of the device are accurately adjustable by controlling the yield stress of MR fluid, so that the vibration control, the precision position control and the speed control of rotating machines equipped with the device can be achieved. As an engineering application, constant rotational speed regulation is conducted using the device manufactured in laboratory, introducing PI control action not only with varying torque due to gravitation, with initial angular speed, but also with constant external torque made by hand. To do this, first, mathematical model was obtained via experiments. And then, simulation was carried out, based on the experimentally identified model. Its result was confirmed through experiment. It is identified by simulation and experimental results that PI action leads to satisfactory control performance in both cases that varying torque due to gravitation, with initial angular speed, and constant external torque are applied.