• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.148-152
• /
• 2005

A novel interferometric isolator has been proposed and designed to fabrticate waveguide magnetooptic isolator operating at a wavelength of $1.55{\cal}um$. The device consists of MMI (multimode interference) couplers and has a magnetooptic guiding layer with different layer structure in arms of the inteferometer. The layer structures in the arms of inteferometer are $HfO_2/CeY_2Fe_5O_{12}/NOG$ and $SiO_2/CeY_2Fe_5O_{12}/NOG$, respectively. This configuration give rise to different nonreciprocal phase shift. In consequence, the isolator operates under a unidirectional magnetic field. The optimized structure of the isolator was determined by a 3D beam propagation method.

• The Journal of the Petrological Society of Korea
• /
• v.19 no.1
• /
• pp.51-65
• /
• 2010

The Dongmakgol Tuff is a stratigraphic unit which is composed of voluminous ignimbrites in the Cheolwon basin. The ignimbrites belong to pumice-rich vitric tuffs that show eutaxitic to parataxitic fabrics from fiamme or pumice clasts. They are almost densely welded and strongly flattened, but often parallel aligned and stretched. Also they exhibit flow indicators such as flow lineations, imbrications, tensional cracks and boudins from their alignment and/or elongation, and lithic and pumice clasts show lateral grading in their average maximum diameter. Flow direction map from the lineations, asymmetric structures and lateral grading diagram indicate that the Dongmakgol Tuff has a source from its southwestern part near a boundary between southern Dongmakri and northern Gomunri, and is considered that the ignimbrites took emplacement processes of laminar flows during the final stage of flowage and the flow lineations are from the result of shear stress during that times.

• Korean Journal of Optics and Photonics
• /
• v.18 no.6
• /
• pp.395-400
• /
• 2007

We propose a design and analysis of an optical system using a prism with a high enough refractive index for wet fingerprint identification. Important parameters including the tilting angle($\beta$) of the $1^{st}$ image plane, an anamorphic distortion, and a tilt of image plane are considered in terms of the apex angle of the prism($\alpha$) and refractive index of the prism material. Our suggestion on refractive index and apex angle of the prism corroborates well with experimental results.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.5 s.311
• /
• pp.68-75
• /
• 2006

Multimedia fingerprinting protects multimedia content from illegal redistribution by uniquely marking every copy of the content distributed to each user. Differ from a symmetric/asymmetric scheme, fingerprinting schemes, only regular user can know the inserted fingerprint data and the scheme guarantee an anonymous before recontributed data. In this paper, we present a scheme which is the algorithm using LDPC(Low Density Parity Check) for detection of colluded multimedia fingerprint and correcting errors. This proposed scheme is consists of the LDPC block, Hopfield Network and the algorithm of anti-collusion code generation. Anti-collusion code based on BIBD(Balanced Incomplete Block Design) was made 100% collusion code detection rate about the linear collusion attack(average, AND and OR) and LD% block for the error bits correction confirmed that can correct error until AWGN 0dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.1
• /
• pp.84-92
• /
• 2000

A GaAs MESFET MMIC transmitter for 2.4 GHz wireless local loop handset is designed and fabricated. The transmitter consists of a double balanced active mixer and a two stage driver amplifier with voltage negative feedback. In particular, a pair of CS-CG(common source-common gate) structure compensates the reduction in dynamic range caused by unbalanced complementary IF input signals. And to suppress the leakage local power at RF port, the mixer is designed by using phase characteristic between the ports of MESFET. At the bias condition of 2.7 V and 55.2 mA, the fabricated MMIC transmitter with chip dimensions of $0.75\times1.75 mm^2$ obtains a measured conversion gain of 38.6 dB, output $P_{idB}$ of 11.6 dBm, and IMD3 at -5 dBm RF output power of -31.3 dBc. This transmitter is well suited for WLL handset.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.10
• /
• pp.2014-2025
• /
• 2015

Wireless Sensor Networks (WSNs) are special network which has purpose of usage for gathering information of certain area and observing situation. WSNs consist of small nodes with sensing event such as temperature, movement or certain objects. The sensor has the capabilities to collect data and route data back to the sink. The sensors route data either to other sensors or back to a sink in one direction. That is, traditional WSNs communicate asymmetrically. However, under the new paradigm of the Internet of Things (IoTs) or Cyber Physical system (CPS), WSNs have potential to be used as important area. So, more research is necessary to communicate with each moving objects symmetrically in WSNs. In this paper, we proposed symmetric communication scheme among mobile objects in wireless sensor network. Simulation results show that our scheme is superior th the existing ones in terms of energy consumption and transmission success ratio.

• Korean Journal of Optics and Photonics
• /
• v.24 no.2
• /
• pp.64-70
• /
• 2013

In this paper, two white light emitting diodes(LEDs) were manufactured by using two kinds of yellow phosphor, YAG:Ce and $(Sr,Ba)_2SiO_4:Eu$, and their spectroscopic properties were compared and analyzed. We found that the asymmetric double sigmoidal function can be applied to both white LEDs to obtain the center wavelength, the half width, and the skewness parameters. According to this analysis, the half width of the emitting spectrum of silicate phosphor was smaller than that of YAG phosphor, indicating smaller color rendering index. However, the silicate phosphor exhibited better color stability depending on the driving current than the YAG phosphor. The current dependence of the luminous efficacy of both white LEDs was investigated, which showed that efficacy decreased monotonically with current. The efficacy of the silicate-based white LED was lower than that of the YAG-based LED by about 10~12 lm/W.

• Korean Journal of Optics and Photonics
• /
• v.31 no.2
• /
• pp.88-95
• /
• 2020

In this study, we present methods to quantitatively analyze and correct the distortions and biocular parallaxes in a head-up display (HUD). To analyze asymmetrical distortions, five kinds of distortions are proposed and evaluated at five eye positions of an eyebox. The differences between distortions evaluated at the four corners of the eyebox and that at the center are defined as the relative distortions, which occur due to head motion of the driver. We also define the convergence and divergence parallaxes at six biocular positions in the eyebox to quantitatively analyze them. Using these analytical methods, we constrain the degree of biocular parallaxes and distortion changes with eye position to be small, so that an optical system nearly free from them can be obtained by optimization design for HUD optics.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.3-9
• /
• 2001

In this paper, a random number generator for simulation of speech-waveform coders was designed. A random number generator having a desired probability density function and a desired power spectral density is discussed and experimental results are presented. The technique is based on Sondhi algorithm which consists of a linear filter and a memoryless nonlinearity. Several methods of obtaining memoryless nonlinearities for some typical continuous distributions are discussed. Sondhi algorithm is analyzed in the time domain using the diagonal expansion of the bivariate Gaussian probability density function. It is shown that the Sondhi algorithm gives satisfactory results when the memoryless nonlinearity is given in an antisymmetric form as in uniform, Cauchy, binary and gamma distribution. It is shown that the Sondhi algorithm does not perform well when the corresponding memoryless nonlinearity cannot be obtained analytically as in Student-t and F distributions, and when the memoryless nonlinearity can not be expressed in an antisymmetric form as in chi-squared and lognormal distributions.

• Membrane Journal
• /
• v.15 no.3
• /
• pp.198-205
• /
• 2005

Double-layered polymer films to assay the radioactive contamination were formulated using polysulfone (PSF) and cerium activated yttrium silicate (CAYS), consisting of a dense support layer and a CAYS-holding top layer prepared via the diffusion-induced phase inversion. As the vapor exposure process was omitted, the CAYS-holding layer showed a typical asymmetric structure, with CAYS being transfixed into the polymer network spread with large macropores. With the increase in vapor exposure time before immersion, morphology of the films transformed from asymmetric to sponge-like structures, with CAYS being localized in cellular structure. The border structure between the two layers reflects the phase inversion behavior of a cast solution during the coagulation. In the radioactive detection, the polymer phase in a film holding a sponge-like structure is so dense that the radionuclides, deposited on the film, could not filter through the phase, consequently resulting in the loss in the detection efficiency of the film.