• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.33-33
• /
• 1998

용접 공정은 우주 항공 산업 분야에서 금속 구조물의 확실한 기밀 보장을 위해 필수적인 매우 중요한 공정 중의 하나로서 특히 새로이 개발되는 비강도가 높은 신소재의 경우일수록 그 재료에 대한 용접성이 주요 해결 과제이다. 용접 공정에서 모재는 국부적으로 용융 온도 이상으로 가열되었다가 급히 냉각되기 때문에 열 사이클은 용접부의 크기, 형상 및 용접 공정에 따라 큰 차이를 보이며, 제품 품질에 큰 영향을 끼치고 있다는 것은 널리 알려진 사실이다.

• Defense and Technology
• /
• no.3 s.289
• /
• pp.51-57
• /
• 2003

높은 비강도와 산화성 및 환원성 분위기에서의 탁월한 내식성 등으로 무기체계에 적합한 소재인 타이타늄은 1790년 영국의 목사 Gregor가 원소를 발견한지 156년이 지난 1946년에서야 비로소 첫방탄시험이 미국의 실험실에서 이루어지게 되었다. 그러나 타이타늄의 높은 화학반응성과 높은 융점($1670^{\circ}C$)때문에 상업적으로 광범위하게 사용되는 것은 더디게 진행되어 왔다. 최근 선진국에서는 타이타늄 재료의 지상무기체계 적용이 광범위하게 검토되어 진행되고 있다.

• Journal of Veterinary Clinics
• /
• v.19 no.3
• /
• pp.383-386
• /
• 2002

Intranasal tumors were diagnosed in 21 dogs for 5 years. Sneezing, nasal discharge, nasal bleeding were the most common clinical signs. Diagnosis was performed by blood test, histological examination, radiography, and computed tomography. Among the 27 nasal tumors, adenocarcinornas, squamous cell carcinomas, and chondrosarcomas were relatively common. Breeds with nasal tumor were shetland sheepdog, mongrel, and shiba. The dogs were treated by surgical resection, radiotherapy, chemotherapy, cryosurgery, and radiofrequency ablation. Each therapy alone was not effective, but the combination of two or more therapies had good effects on progression of tumor and made the survival time extended.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.12 no.1
• /
• pp.34-38
• /
• 2001

Background and Objectives : With the development of computerized systems, an objective evaluation methods of nasal speech and nasal geometry have become readily available by means of a simple, noninvasive technique. In this study, we assessed the nasality, nasal formant, nasal volume and nasal area in patients with hypertrophic rhinitis before and after turbinate surgery. Material and Method : With the nasometer, we measured nasalance, which reflects the ratio of acoustic energy output of nasal sounds from the nasal and oral cavities. With CSL 4300B, we measured nasal formants. We used acoustic rhinometer to measure nasal area and nasal volume. Postoperative changes of above factors were compared with preoperative values. Paired t-test and Pearson's correlation were used for statistical analysis. Results : The first nasal formant frequency, nasalance scores of three passages(baby, mamma and rabbit passages), minimal cross sectional area(MCA) of narrow side, nasal volume of narrow side and nasal volume of wide side had increased significantly after turbinate surgery (p <0.05). The MCA and nasal volume of narrow side and MCA of wide side showed significant correlation with nasalance score of rabbit passage and baby passage showed significant correlation with nasal volume of narrow side(p<0.05). Conclusion : There were significant increases in nasalance scores, first nasal formant frequency, MCA and nasal volume after turbinate surgery. Thus, we must consider the possibility of voice changes postoperatively in professional voice users.

• Composites Research
• /
• v.13 no.1
• /
• pp.78-88
• /
• 2000

Tribological properties of fiber composite materials were measured and wear resistant hybrid structure was proposed based upon the understanding of tribological behavior of the composite materials. Unidirectional composites with glass fibers, carbon fibers, and aramid fibers were tested for tribological properties in order to propose a wear resistant hybrid structure. Hybrid composites which contain carbon and aramid fibers were prepared, the specimens were sliced by a water-jet cutter, and friction and wear properties were measured. An experimental set-up was designed and built for the friction and wear test of the composite specimens. Unidirectional fiber composite and hybrid composite specimens were tested to evaluated the tribological behavior for biomimetic applications. It is observed that the friction and wear behavior of fiber composites depends upon fiber orientation, sliding speed, and type of reinforcing fibers.

• The korean journal of orthodontics
• /
• v.39 no.4
• /
• pp.257-272
• /
• 2009

This case report describes the treatment of an adult patient with a Class I canine and molar relationship but a convex profile with a retrognathic mandible and marked lip protrusion, as well as an excessive lower anterior facial height and reduced transverse width on both arches due to a nasal airway obstruction. The constricted arches were expanded by surgically-assisted rapid palatal expansion and the application of a Schwarz appliance to the maxilla and mandible. Acceptable facial balance was obtained using contemporary directional force technology with microimplant anchorage (MIA), which provided horizontal and vertical anchorage in the maxillary and mandibular posterior teeth, as well as intrusion and torque control in the maxillary anterior teeth, resulting in a favorable counterclockwise mandibular response. The total treatment period was 29 months and the results were acceptable for 13 months after debonding.

• Journal of Radiation Protection and Research
• /
• v.37 no.4
• /
• pp.226-230
• /
• 2012

The gross alpha analysis of nasal smear samples for the radiation emergency and the additional follow-up steps were established. Cotton swab sticks using in local hospitals for nasal smear in Korea were used for the verification. The measurement results of standard samples spiked with certified reference source were well agreed within ${\pm}20%$ compared with reference values. The clearance ratio of smear samples conducted with wet smear condition showed higher value. To eliminate the quenching effect of liquid scintillation samples, dry of smear samples should be followed up before counting samples. Based on the measurement results, medical decision levels and internal dose assessment were established for the victims in the beginning of radiation emergency.

• Composites Research
• /
• v.27 no.2
• /
• pp.37-41
• /
• 2014

Fiber reinforced composite materials have outstanding specific strength and specific stiffness. So the use of composite materials increases in various kinds of industrial fields including sports goods such as bicycles. Composite materials are used to make structural parts with various kinds of shapes. Specially, rectangular composite tubes are used to make a few of composite bicycle frames, but there has been a few of research on this issue. Rectangular composite tubes are designed to have appropriate radius of curvature and endure bending and torsional loads. In this research, nine kinds of rectangular composite tubes having aspect ratios 1:1, 1:1.5, 1:2 and radius of curvatures R5, R10, R15 were fabricated. The carbon fiber reinforced composite material was used to make tubes having same cross sectional areas. The stacking sequence of tubes is $[0/90/{\pm}45]s$. Experimental evaluation was accomplished to apply bending and torsional load to the tubes. Experimental results show that bending and torsional characteristics depend on radius of curvature and aspect ratio of rectangular composite tubes.

• Composites Research
• /
• v.33 no.5
• /
• pp.288-295
• /
• 2020

Fiber-reinforced composite laminates have high specific stiffness and strength and are expected to be useful for weight reduction in weight-sensitive industries, such as automotive and aerospace. However, designing composite laminates is often dependent on designer's experience and intuition because of difficulties in determining the number of plies and stacking sequence, which tends to lead to over-design. In this study, optimal design of composite laminates was performed to minimize weight, while withstanding the given load. Based on the enumeration method, all combinations of stacking sequence satisfying the design guideline for composite laminates were considered. Composite laminates were discretized into panels. Optimal number of plies and stacking sequence for each panel were determined considering local load on each panel and contiguity across adjacent panels. Failure index from Tsai-Wu criteria was optimized for strength and buckling analysis was performed for compressive load. Stacking angles of 0, ±45 and 90° were used.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.11
• /
• pp.1239-1243
• /
• 2014

This paper presents the application of carbon-fiber-reinforced polymer (CFRP) for the damage absorption and optimal design of portable smart devices to close in life. CFRP specimens are subjected to a tensile test to estimate their mechanical properties in terms of the stacking angles. Further, the screw reverse torque and screw torque at each stacking angle are determined using a torque tester after tapping holes on the CFRP specimens. Two experiments are performed for comparing their results in order to determine optimal conditions. In the tensile test, a woven specimen is found to have the highest strength and stiffness. In the case of the woven specimen, no difference is observed even when it is applied to prevent loosening of the coating. And average result value was excellent.