• Journal of the Korean Geosynthetics Society
• /
• v.2 no.2
• /
• pp.3-11
• /
• 2003

Researches on the induced trench method using compressible materials such as clay, mud, straw, or EPS block have been performed to reduce the load acting on buried conduits under a high fill. The induced trench method has the problems that the arching area due to the compressible arching material is one dimensional or localized in a narrow zone. The main purpose of this study is to solve the problems of the induced trench method mentioned above. The various types of laboratory model tests are conducted to find the effects of the variations of EPS block width, multilayer application, soil density, and diameter of the flexible steel pipe. A series of model tests was conducted to evaluate the reduction of earth pressure on conduits using EPS block. Based on modeling test it is found that the magnitude of vertical earth pressure on conduits was reduced about 60% compared with conventional flexible conduit systems.

• Journal of KIISE:Information Networking
• /
• v.33 no.1
• /
• pp.91-102
• /
• 2006

We analyze the performance of MAC-layer Reed-Solomon error recovery in the cdma2000 1xEV-DO Broadcast and Multicast Services (BCMCSs) environment, with respect to the size of the ECB (Error Control Block) and the air-channel condition, and establish the relationship between ECB size, error recovery capacity and service latency. From this we propose an adaptive error recovery scheme which adjusts the size of the ECB to reflect the environment of the mobile nodes so as to meet the required service quality (target bit error-rate), while reducing the latency of real-time applications. Extensive simulation results show the effectiveness of our approach compared to the current static scheme. Proposed adaptive schemes achieves near optimal solution with respect to service latency while satisfying the required service quality.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.63-71
• /
• 2009

In this study, we propose a revised dynamic ROI (Region-of-Interest) coding method in which the focused ROI is automatically extracted without help from users during the recovery process of low DOF (Depth-of-Field) JPEG2000 image. The proposed method creates edge mask information using high frequency sub-band data on a specific level in DWT (Discrete Wavelet Transform), and then identifies the edge code block for a high-speed ROI extraction. The algorithm scans the edge mask data in four directions by the unit of code block and identifies the edge code block simply and fastly using a edge threshold. As the results of experimentation applying for Implicit method, the proposed method showed the superiority in the side of speed and quality comparing to the existing methods.

• Journal of Navigation and Port Research
• /
• v.44 no.4
• /
• pp.305-311
• /
• 2020

Rising sea levels along the coast from global warming causes the increase of wave energy along the coast. This rise in sea levels results in relatively deep water levels, which would incur the loss of sand that had not occurred in the past from erosion in coastal areas. Generally, it has been challenging to protect against coastal erosion, and the slope, cross-sectional shape, and materials are selected for the site conditions depending on the change in external forces. However, the application of counter measures based on insufficient understanding of the phenomenon is causing various damage, indicating the need for technological development and converging technologies to improve credibility. In this study, we developed eco-friendly permeable biopolymer concrete blocks to control the coastal erosion by using the Bio-Coast, an effective porous structure that mitigates the destructive erosion caused by the rising sea levels. The hexagonal design of Bio-Coast was derived from the honeycomb, columnar joints, and clover, which are durable and stable structures in nature, and the design was changed to apply bumps on the Bio-Coast filling in the form of a clover to reduce wave overtopping and run-up. Applying the field condition of beaches on the east coast of Korea, the block weight and size were decided and the prototype blocks were manufactured and are ready for field placement. In particular, it is intended to protect coastal areas from destructive erosion by natural and artificial external forces, and to extend the design to river,s lakes, and natural walking trails, to improve the efficiency of quality control and process control through the use of blocks.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.6
• /
• pp.19-27
• /
• 2010

An region of interest processing technique is to handle preferentially some part of an image dynamically according to region of interest of the users in JPEG2000 image. A small image is not important, but in a big image the specified region that the user indicated has to be handled preferentially because it takes long time to display the whole image. If the user indicates a region of the outline image, the browser masks the region and sends the mask information to the source that transmitted the image. The server which got the mask information preferentially sends the code blocks matching the masks. Here, quickly generating mask information is important, so, in this paper using predefined 48 mask patterns, selecting one of the patterns according to the distribution of ROI(Region-of-Interest) and background, we remarkably reduced the time computing the mask region. Blocks that the patterns are applied are the blocks mixed of ROI and background in a block. If a whole block is an ROI or a background, these patterns are not applied. As results, comparing to the method that precisely handles ROI and background, the quality is unsatisfactory but the processing time remarkably reduced.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.6
• /
• pp.136-143
• /
• 2015

Snow-melting system has been applied not only to roads for car traffic but also to pavement for the pedestrians safety reason in some of the developed countries such as USA and Canada based on countermeasures against Natural Disasters Act revised in 2000. Even though this system was introduced in korea in 2006 and has been partly applied to car traffic roads, there is few places that the system has been applied. Therefore, in this research a snow-melting system with a block-type to cover a pavement that efficiently transfers heat form heat rays to the top of a pavement and protects the heat rays. A quality check showed that compression and bending strength was improved approximately 5 times stronger and 7 to 10 times more absorption rate than the KS(Korea Industrial Standard) requirement. Moreover, only 10 minute was required to increase temperature above zero with a block-type snow-melting system whereas approximately 180 minute was spent with the existing system. This research is expected to contribute to environmental issues and reduce accidents on a slippery road.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.683-693
• /
• 2011

In this paper, a design of high current and broad-band microwave bias-tee was presented for a stable bias of a high power amplifier. An input impedance of bias-tee should be shown to 50 ohm with the wideband in order to be stably-biased the amplifier. For this design of the bias-tee, a capacitor of bias-tee for a DC block was designed with a high wide-band admittance by a parallel sum of capacitors, and a inductor for a RF choke and a DC feeding was designed with a high wide-band impedance by a series sum of inductors. As this inductor and capacitor for the sum has each SRF, band-limitation of lumped element was driven from SRF. This limitation was overcome by control of a resonance's quality factor with adding a resistor. 1608 SMD chips for design's element was mounted on the this pattern for the designed bias-tee. The fabricated bias-tee presented 10 dB of return loss and wide-band about 50 ohm input impedance at 10 MHz~10 GHz.

• Journal of Bio-Environment Control
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2003

This study was conducted under the condition of greenhouse to investigate the relationships between the period of long day (LD) treatment before short day treatment, the dry matter production and flower quality of cut chrysanthemum (Indicum group) cv. Reagan Improved at Wagenigen University in the Netherlands. Rooted cuttings of chrysanthemum (Indicum group) cv. Reagan Improved were transplanted on 6th, 13th, loth of September and all of them were treated with short-days (SD) on 21th September. The periods from planting until final harvest were 70, 77, 84 days after being planted for 1, 2, and 3 week-LD period, respectively. The time of flower initiation was similar in all treatments. The number of flowers per plant was greater in the plot of 3 week-LD period than that in the plot of 1 or 2 week-LD period. The fresh weight and dry weight of flowers also increased more in the plot of 3 week-LD period than that in the 1 week-LD period by 4g and 0.4g, respectively. The final dry matter production ($g{\cdot}m$^{-2}$ ) was greater in the treatment of 3 week-LD period than 1 or 2week-LD period. In this study, LD period before short day treatment did not affect the time of flower initiation and flower quality. As a result, 3 week-LD period before short day treatment was strongly recommanded for producing high quality cut flowers of greenhouse-grown chrysanthemum.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.165-173
• /
• 2014

This paper presents a fast and high-quality haze removal method by the modification of the conventional transmission estimation process. In the conventional haze removal method, the halo and blocking artifacts arises while estimating the transmission. In order to effectively reduce the artifacts, the proposed method employs the maximum filter after the calculation of the dark channel. Because of the reduction of the artifacts, the proposed method can simplify the transmission refinement process without sacrificing the quality of the results: this paper proposes to use the single-channel guided filter instead of the multi-channel guided filter. The experimental results demonstrate that the quality of the dehazed results by the proposed transmission correction process is improved and the haze removal speed is increased by up to 59.6%, when compared to the conventional ones.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.4
• /
• pp.71-78
• /
• 2012

Recycled aggregates are made from construction wastes, and they have many national and social benefits by saving energy, developing substitute resources, and protecting environment. However, low-quality recycled aggregate with low density and high absorption rate cannot be used for structural concrete aggregate but is used mainly for low added value. Therefore, this study aims to identify the characteristics of the materials of recycled aggregates made after crashing and pulverizing waste concrete. For this, their major physical characteristics of cement content, absolute dry density, absorption rate, etc. were reviewed to make a mix design (draft) for the production of the secondary product and performance evaluation was done on the bending strength, absorption rate, bending strength after freezing and thawing, compressive strength, air-dried gravity, etc. of the test products produced by applying the mix design to compare the results with the quality standards of GR mark. The results of the tests showed that the substitution rate of recycled aggregate increased to 50~90 %, which is of superior quality than the performance standards of GR F 4007. Therefore, it is thought that they can be used for various construction works with certain physical characteristics applicable to the production of secondary concrete products using recycled aggregates.