• Science of Emotion and Sensibility
• /
• v.6 no.3
• /
• pp.63-72
• /
• 2003

This study investigated how cognitive style and training context influenced visual discrimination skill acquisition and transfer under time pressure. This experiment consisted of a screening session, a training session, and a transfer session using random polygon comparison tasks. Screening session was designed to separate participants according to their cognitive style (analytic or holistic). Training session was divided into difficult and easy conditions. In transfer session, participants compared polygon pairs in a novel task. The stimuli were presented for 1.5 seconds to examine the influence of time pressure. Through the all sessions, this experiment measured accuracy and response time. According to the results of this study, analytic group responded as quickly as holistic group in the beginning of training session because time pressure induced them to the holistic strategy. However, as training session progressed, their slopes of reaction time increased, suggesting that their own analytic style emerged. Holistic group showed flatter slopes than did analytic group for training session. Of interest is the slopes increased at the beginning of transfer session, suggesting that they developed analytic strategies in difficult training context. It is suggested individuals differently develop strategic processing skills depending on cognitive styles even under time pressure.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.2
• /
• pp.62-69
• /
• 1999

With increased utilization of chemical fertilizer, soil fertility is getting serious problem. As a result, using organic soil conditioner (woody wastes or sawdust compost) would be only solution to recover soil vitality. In this study, manufacturing and characteristics of organic soil conditioner from Shiitake bedlogs (woody wastes) were studied. Also, to investigate the effect of continuous application of this bedlog compost on growth of plants, growth tests for radish and tree seedlings were done. The results are as follows ; Analytical results of decayed and fresh wood materials showed almost same as its wood components. The mixing ratio of raw materials with the other filling materials is essential for the manufacturing as well as good quality of its compost during composting process. In this experiment, mixing 12kg of urea, 25kg of lime, 40kg of chicken shit, and small amount of fermentation aids corresponding to I ton of sawdust resulted in good composts. Their moisture contents were adjusted to about 55%. Temperature of pile, in composting process, rose after I week and kept about above $60^{\circ}C$ for certain period. They were turned two times, 30th and 59th day, respectively, after piling. This bedlog compost contained 81.7% of high organic matter, 1.4% of a little nitrogen, 6.75 of pH and 25 - 30 of C/N ratio. There were no harmful effect on germination and growth of plants, such as radish and softwood and hardwood seedlings. Concerned to the effect of bedlog compost on soil temperature, the compost did not affect plant growth by changing soil temperature abruptly, but compensated the soil temperature such as a little increasing on the early morning, a little decreasing on the mid-day or afternoon (pm 2:00), and increasing on the early evening (pm 6:00).

• The Journal of the Korea Contents Association
• /
• v.20 no.3
• /
• pp.1-9
• /
• 2020

The purpose of this study is to verify the effects of ventilation corridor and derive adequate policy alternatives to its application for the city of Sejong, which is located in an inland of Korean Peninsula. In order to introduce the ventilation corridor in the city, it is necessary both to understand change on fresh air flow affected by the construction of new cities and to show its effects which are able to circulate air flow of the city. The study identified ventilation effects using computational fluid dynamics models. In particular, it analyzed change on wind speed and direction after constructing of a new town and cool air flow along the lowlands generated after sunset. In addition, it identified those of reducing particulate matter when arranging buildings conforming to the ventilation corridor at block level. The policy implications derived from simulation can be summarized as follows. First, it is desirable to plan ventilation corridors so that fresh air from mountains, forests, and valleys can flow into cities and mitigate the concentration of particulate matter. Furthermore, public facilities covering parks, plazas, and playgrounds should be installed preferentially to attract safe outdoor activities near to areas with low levels of particulate matter. Finally, it is adequate to prepare for a number of alternative plans by analyzing ventilation corridors when setting out district unit plan.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.95-104
• /
• 2015

Excavated archaeological cast iron objects in improper storage are quickly corroded and disintegrated into block and powder finally. Hence desalination treatment which is a way of removing internal corrosive factors, especially chloride ion, is an important process. But desalination is often omitted or objects are dehydrated by alcohol because the destruction of objects could occur during desalting. Although current desalting methods mostly use an aqueous alkali solution, $OH^-$ ions of water could accelerate corrosion and broaden internal cracks cause of high surface tension. Therefore this study experimented desalting using ethyl alcohol, which is low surface tension, to investigate an effect of desalination. As a result, desalting using ethyl alcohol showed the similar or more effective results of desalting using water. In addition, as aspects of desalting safety, ethyl alcohol desalting method was smaller destruction of objects and extraction of Fe from the objects than the aqueous alkali solution. However, this study explored the possibility of desalting methods using organic solvent in fieldwork, so the results would provide basic date for making the safe and effective desalting method for archaeological cast iron objects through further experiments.

• The Journal of the Korea Contents Association
• /
• v.18 no.1
• /
• pp.164-172
• /
• 2018

This study explores how to implement a learning experience-based professionalism program for a medical students and evaluates its program through effectiveness and usability test. This study aims to provide practical implications for experience-based learning in an undergraduate level. Seventy four first-year medical students enrolled in PDS1(Patient-Doctor-Society 1): professionalism, one-week block (30 hours), one-credit program based on a experience-based learning model. All of the students were given six learning themes and learning resources and supporting tools, and conducted stepwise learning activities; preparation, organization, sharing, reflection and evaluation of experiences. The effectiveness of learning was evaluated by comparing the pre and post results of student's self-assessment on 24 questionnaire items about professionalism. After the course, the students and instructors conducted a usability evaluation of the program through questionnaires or group interviews. Learners' self-assessment results of professionalism such as leadership, self-directed learning, professional attitude, and social accountability all showed significant differences between the pre- and post-test. Satisfaction of the program was distributed to 3.58~3.78 according to items. Instructors and learner interviews confirmed practical usability throughout the course design, implementation and students evaluation. The results of the study showed the feasibility of implementing learning experience-based professionalism program in medical school. This study provides practical implications to develope and evaluate the learning experience-based professionalism program in medical education.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.41-47
• /
• 2016

This paper presents a bond test to find the effect of shear key and edge length from the bonded FRP in near surface-mounted(NSM) retrofit using FRP plate. Main parameters in the test are the location and size of shear key and the edge length. For the test, 10 specimens were made by embedding FRP plate of $3.6mm{\times}16mm$ into $400mm{\times}200(300)mm{\times}400mm$ concrete block and fixing it by using epoxy. Tensile load was applied to the FRP of the specimens until failure and was recorded at each load increase. In addition, the bond slip and elongation of FRP were measured during the test. From the test, it was found that the further the shear key located from the loading, the higher strength we could get. The bond strength inversely depended on the size of shear key. Especially, when the size of shear key was to be lagger than certain size, the bond strength decreased to very low value; even less than that of the case without shear key. The bond strength somewhat increased corresponding to the increase of edge length from the bonded end of FRP to loading in spite of same bond length. The bond-slip between FRP and concrete governed overall deformation in the bond test of NSM FRP so that the effect of excessive slip is necessary to be considered in the design.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.75-82
• /
• 2015

An experimental study has been carried out to examine development length effects for high strength headed deformed bars. Current design codes limit the specified yield strength of headed bars to 400 MPa. Such the limit is due to the lack of experimental studies on headed bars made of high strength materials. Thus a test program was planed with headed bars with the yield strength of 600 MPa. The threaded head type with head shapes of round plate and circular cone was selected in this study. The experimental variables were development length, number of bars, and head shape. Specimens were classified into L-type and S-type depending on the development length. The development length of L-type was computed according to the design code without considering the limit. S-type specimens had shorter development lengths than the L-type. Further classification was made depending on the shape of heads. A-types have the head shape of round plate and B-types have the shape of circular cone. Three L-type specimens were fabricated with the variable of number of bars (1, 2, and 3). Four specimens for each of SA and SB types were made with development lengths of 50%, 45%, 40%, and 35% compared with L-type. Pullout tests was carried out with 11 specimens. The test results were compared with computed strengths with the design code equations (Appendix II). Based the current studies, it can be said that high strength headed deformed bars used in this study be able to provide such strengths computed with the current design code without considering the yield strength limit.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.31-37
• /
• 2005

The aim of this study was to evaluate the effectiveness of sealer placement in simulated root canal extensions. Forty resin blocks were attained from the Endo-training Bloc. In each block. The simulated root canal was made with $\#20$, 80taper GT file. After each block was longitudinally split into two halves, a standardized groove was prepared on one canal wall of two halves to simulate the canal extensions with various irregularities. The two halves of each block were assembled and all simulated root canals were obturated by single cone method with AH26 sealer. Four different methods of sealer placement were used: group A, $\#20$ K-file; group B, ultrasonic file; group C, lentulo spiral; group D, EZ-Fill bi-directional spiral. All obturated blocks were stored in $100\%$ humidity at $37^{\circ}C$ for 1 week, Using a low speed saw, each block was sectioned horizontally. Images of the sections were taken using a stereomicroscope at $\times$ 30 magnification and a digital camera. The amount of the sealer in the groove was evaluated using a scoring system, a higher score indicated better sealing effectiveness. The data was statistically analysed by Fisher's Exact Test. The sealing score was the lowest, specially at the middle area of canal extensions in group A, and that was statistically significant difference from other groups. In conclusion, the ultrasonic file, lentulo spiral and EZ-Fill bi-directional spiral were effective methods of sealer placement in simulated canal extensions. The K file was the least effective method, specially at the middle area of canal extensions.

• 한국노년학
• /
• v.36 no.4
• /
• pp.1109-1124
• /
• 2016

We examined the effect of stereotype threat (STT) on spatial working memory and facial emotion recognition in Korean elderly. In addition, we investigated the role of expected moderator such as self-perception of aging. Seventeen seniors (male=7) received basic cognitive tests including K-WMS-IV, MMSE and answered self-report questionnaires including self-perception of aging, anxiety of aging, attitude toward aging and age identity on the first visit. On the second visit, they were exposed to negative stereotype by reading a script detailing cognitive decline related to aging while a control group was exposed to a neutral content. Following the exposure, they were tested on a spatial-working memory task (Corsi-block tapping task) and emotion recognition task (facial expression identification task). The results showed that the seniors exposed to STT showed significantly lower performance on emotion recognition task (p < .05) (i.e., especially on the more difficult facial stimuli). In addition, there was a significant interaction between STT and self-perception of aging (p< .05), indicating that those who have positive self-perception of aging did not show impairment in emotion recognition task and difficult spatial working memory task under STT. On the other hand, those with negative self-perception of aging showed impaired performance under STT. Taken together, the current study suggests that being exposed to STT could negatively influence cognitive and emotional functioning of elderly. Interestingly, having a positive self-perception of aging could protect the underperformance caused by STT.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.4
• /
• pp.11-17
• /
• 2022

Currently, the income and funds of the local economy are flowing out to the metropolitan area, and talented people, the driving force for regional development, also gather in the metropolitan area, and the local economy is facing a serious crisis. Local currency is issued by local governments and is a currency with auxiliary and complementary functions that can be used only within the area concerned. In order to revitalize the local economy, as local governments have focused their attention on the introduction of local currency, studies on the issuance and use of local currency are continuously being conducted. In this study, by using big data from data materials such as portals and SNS, the consumer image of local currency issued in local governments was identified through big data analysis, and based on the research results, the issuance and operation of local currency was conducted. The purpose is to present implications for The results of this study are as follows. First, by inducing local consumption through the policy issuance of local currency, it is showing the effect of increasing the economic income of the region. Second, local governments are exerting efforts to revitalize the economy and establish a virtuous cycle system for the local economy by issuing and distributing local currency. Third, the introduction of blockchain technology shows the stable operation of local currency. With academic significance, it was possible to grasp the changed appearance and effect of local currency through big data analysis and the policy direction of local currency.