• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1523-1527
• /
• 2015

Traction power is supplied by three-phase alternating current of 154 kV power grid and electric trains are operated on single phase feeding system. It becomes important to use all the three phases equally and convert them into two-phase electric power (90 degree phase rotation) for traction supply. This is achieved by special transformer from the adjacent traction substation which is separated by a neutral section. Neutral section locations are in front of the substation and between the two substations. The first stage of the Seoul-Busan high-speed railway, design curve radius is larger than 7,000 m and the greatest slope is 25‰. The railway track conditions are evaluated as good enough to install a neutral section at the first stage, but a few factors of coasting operation of the train should be considered at the second stage of Seoul-Busan high-speed railway. The neutral section was located at Kim-cheon substation, which made some neutral section problems produced by the operating train, and the neutral section was moved about 1.5 km to the south toward Dong Dae-gu station due to the track operation condition. Some of the trains which stopped at the existing Kim-cheon Gu-mi station produced another motor block failure after moving the neutral section. In this paper, power quality, system performance and track condition, etc. are suggested to solve the problems.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.540-540
• /
• 2012

강우 발생시 유역에 집수된 물이 하천에 이르는 경로에 따른 유출은 지표유출, 지표하유출, 지하수유출로 구분된다. 정확한 수문순환 과정의 해석을 위해서는 지표 흐름뿐만 아니라 지표하 및 지하수 흐름의 해석이 중요한 실정이나 일반적으로 실무에서 사용되는 강우-유출해석 모형은 지표유출을 해석하기 위한 모형이 대부분이며, 지표하 유출과 침투량을 산정하는데 어려움이 있다. 일반적인 강우-유출해석 모형은 Horton 방법, NRCS 방법, Green-Ampt 방법에 의해 유효우량을 분리하며, 이 과정은 침투량을 직접적으로 모형화 할 수 없으므로 지표 및 지표하, 지하수 흐름을 복합적으로 해석할 수 있는 모형이 질적이나 양적으로 부족한 실정이다. 이러한 지표하 흐름과 침투량을 산정하기 위하여 FE-FLOW, PM, MS-VMS, GMS, GW-VISTAS, ARGUS 및 MODFLOW와 같은 지하수 모형을 사용하고 있다. 본 연구에서는 지표하유출 산정을 위한 침투량의 비교분석을 위해 현재 가장 범용되는 지하수 유동 모델링 프로그램인 Visual Modlfow 모형과 GMS 모형을 이용하여 침투량 산정을 위한 수치 모의를 진행하였다. 각 모형의 입력자료는 2009년 국립방재연구원에서 수행한 침투실험시설 자료를 이용하여 동일한 조건을 부여하고, 두 모형의 비교를 위해 Visual Modflow에서는 MODFLOW의 기본 해석방법인 유한차분법(FDM)을 이용하고, GMS 모형에서는 3차원 유한요소해석이 가능한 GMS-FEMWATER를 이용하였다. 두 모형의 수치모의 조건으로 2009년 국립방재연구원에서 수행한 침투실험방법과 동일하게 공극률에 따른 투수성 보도블럭의 구분과 50mm/hr, 100mm/hr, 150mm/hr, 200mm/hr의 강우강도별 선행함수조건에 따른 수치모의를 진행하였으며, 수치모의된 침투량의 적정성을 판단하기 위하여 국립방재연구원의 침투실험 결과자료와 비교분석하였다. 침투실험 자료와 각각 수치모의된 침투량을 비교분석한 결과 서로 유사한 경향을 보이고 있으나 초기 침투시 상대오차가 비교적 크게 발생하였다. 이는 수치모형의 경우 수리실험과는 다르게 모의시작과 동시에 해당 강우강도의 침투가 시작되므로 초기 유입 유출량 발생시간의 차이가 종료시간까지 누적 침투량에 미치는 것으로 판단되며, 매개변수에 많은 영향을 받는 것으로 판단된다.

• The Journal of the Korea Contents Association
• /
• v.3 no.2
• /
• pp.57-64
• /
• 2003

A Web Service is an URL addressable set of functionality that is exposed over a network to serve as a building Hock for creating distributed applications. SOAP is a protocol that Web Service consumers often use, when they request and response to a Web Service, and it is a lightweight, XML-based protocol over HTTP for exchange to information in decentralized, distributed environments. A Web Service is very useful forimplementing common functions in especially a large size business area, because it is invoked by a protocol like HTTP or SOAP that we easily use, and by an XML-based data format In this paper, we implement Web Services that process dip data by computers in enterprise accounts in order to enhance the transparency and productivity of enterprises. we analyse the structure of slip data, design dip database, implement stored procedures for manipulating data of slip database, and make thorn controlled by Web Services. The result of this paper will contribute to the standardization and activation of accounting process systems for e-business area.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.133-140
• /
• 2010

Five strengthened columns and an unstrengthened column were tested under constant axial load and cyclic lateral loads to examine the seismic performance of the unbounded strengthening procedure using wire ropes and T-plates. Main variables considered were the presence of mortar cover for strengthening steel element and anchorage method of T-plate. Test results clearly showed that T-plates having a proper anchorage contribute to transfer of applied moment as well as enhancement of ductility of reinforced concrete columns. However, T-plate not anchored fully into a column base can seldom transfer the externally applied moment, though it highly improves the ductility of column. The presence of mortar cover for strengthening steel elements is significantly effective in enhancing the initial stiffness and flexural capacity of the strengthened columns, but has an adversely effect on enhancing the ductility. The ultimate moment strength predicted from the extended section laminae method in better agreement with test results compared with predictions obtained using stress black specified in ACI 318-05.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.120-120
• /
• 2017

인천지역의 상수도공급은 팔당댐을 취수원으로 하여 도수, 송수관을 거쳐 인천지역 내 정수장을 통하여 각 급수지역까지 일원화된 관로시스템으로 공급되고 있다. 관망에서의 적절한 수압관리, 노후관로 교체사업 등은 급수관망 내 관로 사고위험을 줄일 수 있고, 누수량을 저감하여 무수율의 감소로 이어질 수 있다. 상수관망 내 누수에 영향을 주는 물리적, 운영적 요소를 파악하고, 이를 이용하여 누수해결을 위한 방법론을 제시하는 것은 매우 중요하다. 본 연구에서는 인천시 배수관망 데이터를 활용하여 통계분석 및 인공신경망을 통하여 무수율에 영향을 미치는 인자를 선별하고, 무수율과의 연관성을 분석하고자 하였다. 이를 위해 대상지역에 대한 시설현황 및 운영자료를 취득하고, 무수율 분석에 활용하였다. 인천시의 소블럭을 대상으로 관로노후도, 배수관연장, 평균관경, 급수전당 공급량, 누수발생 횟수, 용도지역, 관망구성 형태 등을 고려하여 무수율과의 관계분석을 위한 통계분석을 수행하였다. 특히 급수에 필요한 최소에너지와 관망에서 공급되는 에너지를 비교하기 위하여 관망해석 프로그램인 EPANET을 이용하여 관망내 절점에서의 수압과 수요량이 적용된 최소공급에너지를 활용하였고, 이를 통하여 블록 내 과잉공급에너지와 무수율의 영향성을 비교하였다. 최종적으로 산출된 주요인자에 대한 주성분분석, 분산분석, 다중회귀분석 등의 통계분석과 인공신경망에 의해 학습된 알고리즘을 통하여 산정된 무수율을 실측 무수율과 비교, 분석하였다. 인공신경망에 의해 산정된 무수율과 실측 무수율의 정확도를 평가하기 위하여 MAE, MSE, PBIAS 등의 정확도 평가와 산점도 분석을 수행하고, 상관계수를 도출하여 가장 정확한 방법을 결정하였다. 분석 결과 통계분석에 의한 다중회귀식으로 산출된 무수율 보다 인공신경망에 의한 무수율이 실측값에 더욱 근접한 것으로 나타났으며 이용된 뉴런의 수의 따라 산출결과가 상이하기 때문에 최적 뉴런의 수를 산정해야 할 필요가 있음을 확인하였다. 특히 사용된 상수관망 주요인자 중 주성분분석을 통하여 선정된 각 성분을 인공신경망에 적용시 더욱 정확한 무수율 예측이 가능한 것으로 나타났다.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.643-647
• /
• 2021

The purpose of this study was to access the possibility and ideal model for corrosive-induced tissue hyperplasia in the rat esophagus. Twenty rat were divided into two group: a healthy group, corrosive group. corrosive burn in esophagus were produced using 30% NaOH on the distal esophagus. After surgical procedure, behavioral and weight changes were monitored on a weekly. At 3 weeks after surgical procedure, fluoroscopic esophagogram was performed and then all rats sacrificed for histological analysis by administering inhalable pure carbon dioxide. Technical surgery for corrosive stricture were 100%. A total of 2 rats died in corrosive group from a corrosive burn related to dysphagia within 14 days. The esophageal stenosis ratio was significantly higher in the corrosive group than in the healthy group (40.1 ± 9.2 % and 1.4 ± 7.2%, respectively; p = 0.001). The tissue hyperplasia ratio was also significantly higher in the Corrosive group (62.5 ± 9% and 22.08 ± 6%, respectively; p = 0.001). Infusion of 30% NaOH may suggest alternative option to evaluation tool for preclinical study in a rat corrosive model.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.297-303
• /
• 2019

This study aims to investigate the characteristics, concepts, types, and strategies of unplugged coding for young children based on computing thinking. The key to unplugged coding for young children is computing thinking. Unplugged coding based on computing thinking for young children can be used to solve problems that can be encountered in everyday life through playing games based on logical thinking by positively utilizing algorithm boards, s-blocks, coding robots, and smart devices without using programs And find new ways to play. Types of unplugged coding for young children include direct input to smart devices, using coding robots with dedicated apps, practicing coding procedures using algorithms, and using hybrid methods. Strategies include understanding algorithms, drawing flowcharts, dividing into smaller parts, finding patterns, inserting, and predicting outcomes.

• International Area Studies Review
• /
• v.13 no.2
• /
• pp.602-616
• /
• 2009

EU and NAFTA which are huge regional economic blocs came out the world economy at the end of the twentieth century. It is the first that Europe has been trying to establish regional economic integration which is a revolutionary change to world economy. So that regional economic integration of Europe(European Union) has been improving to make a complete economic political integration. This paper analyzes trade creation effect for joining European Union(EU) of Central Eastern European countries with random effect estimation and fixed effect estimation. 12 Central Eastern European countries have become membership states of EU since 2004 is able to get 27.4% of trade increase effect on average between old and new membership countries one another as well as between new membership countries one another respectively. It is very important for some countries have a plan to affiliate to EU in the future to realize such a big effect if they are in.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.1
• /
• pp.64-72
• /
• 2001

This paper is on a design of the high-speed cipher IC using IDEA algorithm. The chip is consists of six functional blocks. The principal blocks are encryption and decryption key generator, input data circuit, encryption processor, output data circuit, operation mode controller. In subkey generator, the design goal is rather decrease of its area than increase of its computation speed. On the other hand, the design of encryption processor is focused on rather increase of its computation speed than decrease of its area. Therefore, the pipeline architecture for repeated processing and the modular multiplier for improving computation speed are adopted. Specially, there are used the carry select adder and modified Booth algorithm to increase its computation speed at modular multiplier. To input the data by 8-bit, 16-bit, 32-bit according to the operation mode, it is designed so that buffer shifts by 8-bit, 16-bit, 32-bit. As a result of simulation by 0.25 $\mu\textrm{m}$ process, this IC has achieved the throughput of 1Gbps in addition to its small area, and used 12,000gates in implementing the algorithm.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.6
• /
• pp.77-87
• /
• 2001

This paper describes a design of cryptographic processor that implements the Rijndael cipher algorithm, the Advanced Encryption Standard algorithm. It can execute both encryption and decryption, and supports only 128-bit block and 128-bit keys. As the processor is implemented only one round, it must iterate 11 times to perform an encryption/decryption. We implemented the ByteSub and InvByteSub transformation using the algorithm for minimizing the increase of area which is caused by different encryption and decryption. It could reduce the memory size by half than implementing, with only ROM. We estimate that the cryptographic processor consists of about 15,000 gates, 32K-bit ROM and 1408-bit RAM, and has a throughput of 1.28 Gbps at 110 MHz clock based on Samsung 0.5um CMOS standard cell library. To our knowledge, this offers more reduced memory size compared to previously reported implementations with the same performance.