• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.824-827
• /
• 2011

본 논문에서는 자동차 시트 리클라이너 기어의 파인 블랭킹 성형 실험을 통하여 V-링 설치 위치에 따른 기어의 다이 롤 높이 변화를 검토하였다. 3 종류의 다이 편과 가이드 플레이트 편을 설계하여 파인 블랭킹 금형을 제작하였으며 650 ton 파인블랭킹 프레스에서 성형 실험을 수행하였다. 실험으로부터 제품을 취출하여 다이 롤 높이를 측정하여 분석한 결과 기어 모듈과 관계없이 V-링 설치 위치가 가이드 플레이트에서 멀어짐에 따라 다이 롤 높이가 증가함을 파악할 수 있었다. 이와 같은 결과는 향후 파인 블랭킹 금형의 V-링을 설계할 때 다이 롤 높이를 최소화하기 위하여 유용하게 활용될 수 있을 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.2
• /
• pp.565-570
• /
• 2011

There is always die roll in fine blanking parts which is able to have 100% clean shear surface. In this paper the change of die roll size was studied by fine blanking tryout in order to minimize die roll size. Various die inserts with different die chamfer were machined, fine blanking die was manufactured and tested. The die roll sizes of fine blanking samples were measured and the tendency of thickness directional die roll size was comprehended. This result will be used on the design of die chamfer in order to minimize thickness directional die roll size of fine blanking parts

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2009-2014
• /
• 2012

It is very important to minimize the die roll height of gear, in order to maximize the shear cutting surface(tooth surface) of fine blanking. In this paper, the fine blanking tool sets were manufactured in order to study the die roll height according to V-ring position and die chamfer shape. They were constituted of the various die inserts and guide plate inserts with different die chamfer shape and different V-ring distance. The fine blanking experiment was conducted with the fine blanking tool sets and the die roll height of the gear samples was measured. It should be noted that die roll height on the fine blanked gear increased with increasing the V-ring distance and die chamfer angle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6060-6065
• /
• 2013

Minimizing the height of the die roll is very important for maximizing the size of effective shear planes. In this study, the die roll change was investigated for the change in the amounts and clearance of the V-ring indentation. Shear analysis and experiments were conducted with the V-ring distance fixed to 2mm. Fine blanking die was applied to the die insert with different clearances. Several specimens were analyzed about the height of the die roll. As a result, the pressure of V-ring effectively inhibited the flow of materials. And the height of the die roll was lowest when the clearance between the die and punch was 1% of the material thickness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.125-126
• /
• 2012

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.105-109
• /
• 2001

성형의 종류 ◈금속 성형 ㆍ 스탬핑(Stamping) ㆍ 정밀 블랭킹(Fine Blanking) ㆍ 딥 드로잉(Deep Drawing) ㆍ 다이캐스팅(Die Casting) ㆍ 인베스트먼트 주조(Investment Casting) ㆍ 분말 야금(Power Metallurgy) ㆍ 인발(Wire Drawing) ㆍ 압출(Extrusion) ㆍ 단조(Forging) ㆍ ㆍ코이닝(Coining) ㆍ... ◈비금속 성형 ㆍ 사출(Injection) ㆍ 압축(Compression) ㆍ 블로우 성형(Blow Molding) ㆍ 진공 성형(Vacuum Molding) ㆍ 발포 성형(Foam Molding) ㆍ 피복(Encapsulation) ㆍ 회전식(Rotational) ㆍ 주조(Casting) ㆍ 적층(Laminating) ㆍ 압출(Extrusion) ㆍ...(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.17-18
• /
• 2011

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.5
• /
• pp.157-163
• /
• 1996

This paper is concered on the development of low-cost fine blanking die with two fluid chambers of which the pressure can be controlled by a hydraulic unit and its application to producting circular blanks in a conventional hydraulic press, not in a special triple-action press usually adopte in fine blanking operation. Four important working parameters affecting on the precision accuracy of products such as existence and position of Vee-ring, stripping force and counter punching force are primarily considered for experiments. Finite element analysis by suing ABAQUA software is approxi- mately made for blanking of circular specimen with a flat stripper plate and then compared with experimental measurements. The the theoretical prediction of camber height which represents deflection of a dish-shaped specimen after blanking seems to give a qualitatively good agreement. It is shown through experiments the the camber height decreases with decreasing stripping force and also with increasing counter punching force, but particularly depending on the latter much more than the former.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.8
• /
• pp.174-182
• /
• 1998

This paper describes a research work of developing a computer-aided design and machining of irregular shaped-sheet metal product for blanking or piercing operation. An approach to the CAD/CAM system is based on the knowledge-based rules. Knowledge for the CAD/CAM system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, strip-layout, die-layout, data conversion, modelling, and post-processor module. Based on knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of generating NC data automatically according to drawings of die-layout module. Results which are carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing die in this field.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.6
• /
• pp.27-33
• /
• 1996

In this study, a CAD/CAM system for axisymmetric deep drawing processes has been developed. An approach to the system is based on the knowledge based system. Under the environment of CAD/CAM software of Personal Designer, the system has been written in UPL. The geometries of intermediate and final object in deep drawing process, including processes parameters are input for the CAD/CAM system. The input data can be obtained from the results of Pro_Deep. The parts drawing of die sets for each process is generated in tool design module of the CAD/CAM system. Also. the die assembly drawings can be obtained. NC commands for machining of the part can be generated in the developed CAD/CAM system.