• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.83-86
• /
• 2003

The chemical laser system makes use of a diffusion type chemical reaction, so a fuel is separated from an oxidant by some gap, which is base in this system. In this study, the effects of base on the population inversion that is one of the most important things in the chemical laser system are numerically investigated. The results are discussed by comparison with three cases of base sizes; 0.4mm, 0.8mm and 1.6mm. Major results reveal that the range of population inversion also increases almost linearly in the transitions; DF$^{(2)}$ -DF$^{(1)}$ and DF$^{(3)}$ -DF$^{(2)}$ as the length of base becomes longer.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.495-500
• /
• 2006

Nowadays HCFCs refrigerant are restricted because it cause depletion of ozone layer. However, natural gases such as ammonia as an organic compound, propane and propylene as hydrocarbon are easy and cheap to obtain as well as environmental. Accordingly, this experiment apply the $NH_3$ and R22 to study the performance characteristic from the superheat control and compare the energy efficiency of two refrigerants from the high performance. The condensing pressure of refrigeration system is increased from 15bar to 16bar and degree of superheat is increased from 0 to $10^{\circ}C$ at each condensing pressure. As the result of experiment, when comparing the each COP, we knew the $NH_3$ is suitable as the alternative refrigerant of the R22.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.3
• /
• pp.258-266
• /
• 2000

Experimental investigation and cycle simulation of a capacity modulation of a heat pump system using a hydrofluorocarbon (HFC) refrigerant mixture, R32/134a as an alternative to R22, have been done. In the cycle simulation, the refrigeration system was operated by assigning the temperatures of the external heat transfer fluids with the heat exchangers generalized by an average effective temperature difference. Heating capacity, cooling capacity, and coefficient of performance (COP) of the system were investigated at several operating conditions. Experimental apparatus which had a refrigeration part and a composition changing part was built, and the performance of the heat pump system filled with R32/134a mixture was investigated. A gas-liquid separator was used in the experiment to change the composition by collecting the vapor and the liquid Phase separately, The mass fraction of the charged refrigerant in the heat pump system was 40/60 and 70/30 by weight percentage. The composition of the refrigerant with initial composition of 40/60 varied from 29/71 to 41/59 in the refrigeration cycle. For the refrigerant with initial composition of 70/30, the composition varied from 65/35 to 75/25.

• Journal of Environmental Impact Assessment
• /
• v.26 no.4
• /
• pp.242-256
• /
• 2017

In this paper, dispersion scenarios concerning various meteorological conditions and real urban structures were made to estimate the impacts of hazardous substance leakage accidents and to reduce damages. Based on the scenario of the hazardous substance dispersion, the characteristics of the risk in the pedestrian environment were analyzed in Gangnam, Seoul. The scenarios are composed of 48 cases according to the meteorological conditions of wind direction and wind speed. In order to analyze the dispersion characteristics of the hazardous substances, simulations were conducted using a computational fluid dynamic (CFD) model with hydrogen fluoride releases. The validation for the simulated wind was conducted at a specific period, and all the calculated verification indices were within the valid range. As a result of simulated dispersion field at pedestrian level, it was found that the dispersion pattern was influenced by the flow, which was affected by the artificial obstacles. Also, in the case of the weakest wind speed of the inflow, the dispersion of the hazardous substance appeared in the direction of the windward side at the pedestrian level due to the reverse flow occurred at lower layers. Through this study, it can be seen that the artificial structures forming the city have a major impact on the flow formed in urban areas. The proposed approach can be used to simulate the dispersion of the hazardous substances and to assess the risk to pedestrians in the industrial complexes dealing with actual hazardous substances in the future.

• Restorative Dentistry and Endodontics
• /
• v.35 no.3
• /
• pp.173-179
• /
• 2010

The purpose of the present study was to compare the influence of post-surface treatment with silane, hydrogen peroxide, hydrofluoric acid or sandblasting and to investigate the effect of silane in combination of the other treatments on the microtensile bond strength between fiber posts and composite resins for core build-up. Thirty-two glass-fiber posts (FRC Postec Plus, Ivoclar Vivadent, Schaan, Liechtenstein) were divided into eight groups according to the different surface pretreatments performed: silane application (S); immersion in 28% hydrogen peroxide (HP); immersion in hydrogen peroxide followed by application of silane (HP-S); immersion in 4% hydrofluoric acid gel (HF); immersion in hydrofluoric acid gel followed by application of silane (HF-S); sandblasting with aluminum oxide particles (SB); sandblasting followed by application of silane (SB-S). In control group, no surface treatment was performed. The composite resin (Tetric Flow, Ivoclar Vivadent, Schaan, Liechtenstein) was applied onto the posts to produce the composite cylinder specimen. It was sectioned into sticks to measure the microtensile bond strength. The data was analyzed with one-way ANOVA and LSD test for post hoc comparison (p < 0.05). Post pretreatment with sandblasting enhanced the interfacial strength between the fiber posts and core materials. Moreover, sandblasting followed by application of silane appears to be the most effective method that can improve the clinical performance of glass fiber posts.

• Korean Chemical Engineering Research
• /
• v.55 no.1
• /
• pp.48-53
• /
• 2017

Since the number and the amount of toxic substances handled by domestic companies have been increased, the possibility of serious chemical accidents has become severe. According to Chemistry Safety Clearing-house (CSC), the number of chemical accidents for the last five years has been rapidly raised. A representative example which shows the serious impact of a chemical accident is HF (Hydrogen Fluoride) accident generated in Gumi in 2012. In order to make effective responses for mitigating losses of accidents, the most suitable consequence model has to be selected and implemented throughout the considerations of chemical properties and environments. Even if each consequence model has been verified by the results of experiments, it is necessary to analyze and compare the usability of them according to various scenarios. In this study, the Gumi HF accident is simulated by HGSYSTEM, which is the most specialized model for the release and dispersion of HF. It is found that the ending point of ERPG-2 is about 1 km from the accident point. In order to investigate the usability of the most representative consequence models (ALOHA and CARIS), the results of them are compared with one of HGSYSTEM.

• Clean Technology
• /
• v.18 no.3
• /
• pp.301-306
• /
• 2012

Rapidly growing mobile machines such as tablet PC and smart phone are equipped with touch screen panel using a sturdy material for products surface protection. Therefore, surge of chemically strengthened glass was increased and the amount of waste matter is proportional to demand. The purpose of this study is environmental impact assessment on touch screen panel of chemically strengthened glass by material life cycle assessment (MLCA). We used CES of Granta, SimaPro and Gabi software for MLCA. Chemically strengthened glass (2.7, 5.7 and 10.3 inch) was calculated to environmental impact assessment by Granta software under two cases. One case is Landfill and the other case is Reuse. As a result, in case of reuse, energy values of 2.7, 5.7 and 10.3 inches were reduced by an average of 51.4%, $CO_2$ values were reduced by an average of 46.6% than Landfill case, respectively. We assessed impact categories of 11 types using SimaPro software. As a result, the contents of fossil fuels, inorganics and climate change have a huge impact than the other impact categories. And the main cause of environmental impact is antimony and hydrogen fluoride in Gabi results.

• Journal of the Korean Institute of Gas
• /
• v.20 no.6
• /
• pp.1-8
• /
• 2016

Gu-mi hydrogen fluoride leak accident in 2012 was amplified social anxiety for chemical accidents. To relieve these anxieties Off-site Risk Assessment was introduced in 2015. Off-site Risk Assessment is targeted at most chemicals, and most of the high-pressure-toxic gases which are mainly used in high-tech industries such as semi conductor, display, Photovoltaic panels industry are included in the substance of the Off-site Risk Assessment. Since Korean companies occupy a high market share in high-tech industries, high pressure-toxic domestic gas consumption is constantly increasing. Accordingly, it is expected to increase the possibility of accidents. In accordance with the circumstances, this study was to conducted Consequence Analysis(CA) about high pressure-toxic gases those are high demand in domestic. CA was used for ALOHA developed by US EPA & US NOAA and the CA result of Arsine was the largest at 4,700 m. CA results are expected to be utilized for determining the effective Safety distances when high pressure-toxic gas leak.

• Korean Journal of Hazardous Materials
• /
• v.2 no.1
• /
• pp.18-26
• /
• 2014

We analyzed the demand of competent authorities requiring adequate technical information for initial investigation of chemical accidents. Reflecting technical reports on chemical accident response by environmental agencies in the U.S. and Canada, we presented information on environmental diffusion and toxic effects available for the first chemical accident response. Hydrogen fluoride may have the risk potential to corrode metals and cause serious burns and eye damages. In case of inhalation or intake, it could have severe health effects. The substance itself is inflammable, but once heated, it decomposes producing corrosive and toxic fume. In case of contact with water, it can produce toxic, corrosive, flammable or explosive gases and its solution, a strong acid, may react fiercely with a base. In case of hydrogen fluoride leak, the preventive measures are to decrease steam generation in exposed sites, prevent the transfer of vapor cloud and promptly respond using inflammable substances including calcium carbonate, sodium bicarbonate, ground limestone, dried soil, dry sand, vermiculite, fly ash and powder cement. The method for fire fighting is to suppress fire with manless hose stanchions or monitor nozzles by wearing the whole body protective clothing equipped with over-pressure self-contained breathing apparatus from distance. In case of transport accident accompanied with fire, evacuation distance is 1,600m radius. In cae of fire, fire suppression needs to be performed using dry chemicals, CO₂, water spray, water fog, and alcohol-resistance foam, etc. The major symptoms by exposure route are dyspnoea, bronchitis, chemical pneumonia and pulmonary edema for respiration, skin laceration, dermatitis, burn, frostbite and erythema for eyes, and nausea, diarrhea, stomachache, and tissue destruction for digestive organs. In atmosphere, its persistency is low, and its bioaccumulation in aquatic organism is also low.

• The Journal of Korean Academy of Prosthodontics
• /
• v.25 no.1
• /
• pp.363-378
• /
• 1987

도재소부전장관에서 금속이 노출되지 않고 도재만이 파절시, 구강내에서 직접 행할 수 있는 심미적 수복 방법으로서 복합성 수지를 이용한 수복 방법이 널리 이용되고 있는데 본실험의 목적은 도재와 광중합성 수지간의 접합강도를 비교 측정코저 함에 있다. 본 실험에서는 주사전자 현미경을 사용하여 도재의 부식액 (5% 불화수소산용액, Excelco's porcelain etching gel) 및 부식 시간(2.5분, 5분, 10분, 20분)에 따른 부식양상을 먼저 관찰하였다. 그다음 각기 다른 시간에서 부식 처리된 도재와 대조군으로서 미부식 처리된 도재에 광중합성 수지를 부착시킬시, 첫째 Silane coupling agent(Scotch-Prime)도포후 광중합성 수지를 결합 시켰고 둘째 bonding agent(Scotch bond)도포후 광중합성 수지를 결합시켰으며 셋째 Silane coupling agent(Scotch-Prime)에 bonding agent(Scotch bond)를 도포후 광중합성 수지로 결합 시킨후, 인장강도 측정기 (Shimadzu universal testing machine)를 사용하여 결합력을 측정한 결과 다음과 같은 결론을 얻었다. 1. 부식처리된 도재가 미부식 처리된 도재 보다 결합력이 높았다. (p<0.05, P<0.001) 2. 부식 처리된 도재나 미부식 처리된 도재에 있어서 silane coupling agent 도포후 bonding agent로 처치한 경우 가장 결합력이 높았으며 그다음 silane coupling agent로 처치한 경우, bonding agent로 처치한 경우의 순이었다. 3. 도재부식 시간의 증가에 따른 결합력의 차이는 5% HF용액으로 부식 처리된 도재와 Excelco로 부식 처리된 도재에 있어서 5분 정도 까지는 결합력의 증가를 보였으나 그 후에는 결합력에 있어서 거의 증가하지 않는 양상을 보였다. 4. Excelco로 부식 처리된 도재와 5% HF 용액으로 부식처리된 도재간의 결합력 차이에 있어서 bonding agent만으로 처치한 경우에는 두결합력 사이에 서로 유의한 차이를 보이지 않았으나 (P>0.5) silane coupling agent만으로 처치한 경우와 silane coupling agent 도포후 bonding agent로 처치한 경우에는 두결합력 사이에 서로 유의한 차이를 보였다. (P<0.05, P<0.001) 5. Excelco로 부식처리된 도재가 5% HF 용액으로 부식처리된 도재보다 부식정도가 더 현저하였다.